New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

XK5692-540KV Brushless Inrunner

XK5692-540KV Brushless Inrunner

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
Váha:
1158 g
SKU:
XK5692-540KV
WANT FREE SHIPPING? Click here to find out more!

XK5692-540KV Brushless Inrunner

Specs.
Max Amps: 88A
Max Volt: 29.6V
Max Watts: 2600W
Rpm/V: 540kv
Resistance: 0.0241 ohms
No-load Current: 1.2A(15V)
Dimension: 55.8mm x 92mm
Mounting hole depth: 8mm
Length of extend Shaft: 20mm
Shaft diameter: 6mm
Weight: 895g

  • SKU XK5692-540KV
  • Brand -
  • Hmotnost ( g ) 1158.00
  • Délka 0.00
  • Width 0.00
  • Výška 0.00
  • Kv (rpm / v) 540.00
  • Maximální proudy (A) 88.00
  • Odpor ( mh) 24.00
  • Maximální napětí ( V) 30.00
  • Výkon ( W ) 2600.00
  • Hřídel A ( mm ) 6.00
  • Délka B ( mm ) 92.00
  • Průměr C ( mm ) 56.00
  • Může Délka D ( mm ) 85.00
  • Celková délka E ( mm ) 112.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is a good motor and the biggest inrunner I have seen. I am planning to put it on a pylon racer to replace a .90 fs engine. This motor has the power equivalent of a 20-35cc engine. I am using an 8mm prop adapter that fits a 6mm shaft and it turns props well. Aircraft ESCs have a little trouble getting it started especially with large diameter props. It turned an 18x8 wood prop on a 4s lipo at 70Amps at almost full throttle. This is the biggest prop it can/should turn. I also tested a 12x10, 12x12e, and 11x14 all reached 72A on 6s lipo. I might use 8s lipo only for short bursts of speed to keep the amps in a safe range. I am hoping for speeds from 120-170mph. I will add comments later when I get the plane ready.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a good motor and the biggest inrunner I have seen. I am planning to put it on a pylon racer to replace a .90 fs engine. This motor has the power equivalent of a 20-35cc engine. I am using an 8mm prop adapter that fits a 6mm shaft and it turns props well. Aircraft ESCs have a little trouble getting it started especially with large diameter props. It turned an 18x8 wood prop on a 4s lipo at 70Amps at almost full throttle. This is the biggest prop it can/should turn. I also tested a 12x10, 12x12e, and 11x14 all reached 72A on 6s lipo. I might use 8s lipo only for short bursts of speed to keep the amps in a safe range. I am hoping for speeds from 120-170mph. I will add comments later when I get the plane ready.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!