New Items Fórum
Registrovat

Total Price

0,00 €

Cart 0 Cart 0 Loading...

Y-3 Fiberglass Tri-Copter Frame (KIT)

Y-3 Fiberglass Tri-Copter Frame (KIT)

Discontinued Product

Please continue searching for a similar product.
SKU:
9108000005
WANT FREE SHIPPING? Click here to find out more!

Looking for something new in the multi-rotor world? Well here it is!

Just when you thought that all multi-rotor frames looked the same...the Y-3 appeared on the scene and is breaking all the rules! Featuring fiberglass construction with ply reinforcement, the Y-3 is super rigid yet lightweight. Its high gloss paint job is impressive to look at making it really stand out in the air. 

This is the first fiberglass Y-3 multi-rotor frame on the market today and is very unique. It will be sure to turn heads at your local flying site. It even features mounting grooves for LED light strips on top and bottom, making it perfect to setup for night flying as well!

The Y-3 arrives in KIT form with all required hardware included. You will simply need to add your own brushless motors/ESCs, multi-rotor control board, micro tail servo and lipoly battery. The Y-3 is mostly pre-built making it quick and easy to get in the air.

Features:
• Unique full-body fiberglass construction
• Beautiful high gloss paint job
• Full body design makes for easy orientation while flying
• All metal pivot tail motor mount
• LED strip mounting grooves

Specs:
Width: 525mm (motor shaft center to center between front arms)
Length: 550mm
Frame weight: 460g (w/out electronics)
Flying weight: 900~950g (w/out battery)

Requires:
28-XX brushless outrunner motor x 3
25~40A brushless ESC x 3
High speed micro servo for the tail x 1
8x4~10x4.7 propeller x 3 (2 standard/1 reverse rotation)
Multi-rotor control board
2200mAh 3S lipoly battery
4CH transmitter and receiver

  • SKU 9108000005
  • Brand -
  • Kapacita ( mAh ) -
  • Hmotnost 1767.0000
  • Délka 605.00
  • Packaging Width 170.00
  • Výška 525.00
  • C3 Y3 Tricopter fibreglass
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

very crazy build, tuning the FC was a bit tough but so worth it

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very crazy build, tuning the FC was a bit tough but so worth it

Das Design ist Klasse, man kann die Fluglage sehr gut erkennen. Mngel konnte ich nicht feststellen. Klebungen, Mechanik und Lackierung ist alles in Ordnung bei meiner Lieferung.
3* Turnigy Aerodrive SK3 - 2836-1040kv, TGY-306G-HV High Voltage Ultra Fast/High Torque MG Digital Alloy Cased Servo, 3000 - 3600 mAh 3S. Hobbyking KK2.1.5 board
Es ist mein erster Multicopter und ich bin begeistert, kann ich nur weiter empfehlen !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Das Design ist Klasse, man kann die Fluglage sehr gut erkennen. Mngel konnte ich nicht feststellen. Klebungen, Mechanik und Lackierung ist alles in Ordnung bei meiner Lieferung.
3* Turnigy Aerodrive SK3 - 2836-1040kv, TGY-306G-HV High Voltage Ultra Fast/High Torque MG Digital Alloy Cased Servo, 3000 - 3600 mAh 3S. Hobbyking KK2.1.5 board
Es ist mein erster Multicopter und ich bin begeistert, kann ich nur weiter empfehlen !

Frame is not well made. No instructions for anything.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Frame is not well made. No instructions for anything.

Quality is brilliant , light well built .. would be nice if it was available as a PNF :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quality is brilliant , light well built .. would be nice if it was available as a PNF :)

Flyes perfectly with a lot of power, with the following components: TGY-306GHV Servo, KK2.0 Multirotor Control Board, 800KV Brushless Motors, Turnigy Multistar 45Amp ESC's, 10x5 Props. RH rotation, or 10x4.5 Props RH rotation,blue LED strips meets perfect for a good looking Tricopter.
7 minutes flys with 4s 2200mah and 12minutes with 4s 4000mah
https://www.youtube.com/watch?v=IOR2wJpv9nc&feature=youtu.be

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Flyes perfectly with a lot of power, with the following components: TGY-306GHV Servo, KK2.0 Multirotor Control Board, 800KV Brushless Motors, Turnigy Multistar 45Amp ESC's, 10x5 Props. RH rotation, or 10x4.5 Props RH rotation,blue LED strips meets perfect for a good looking Tricopter.
7 minutes flys with 4s 2200mah and 12minutes with 4s 4000mah
https://www.youtube.com/watch?v=IOR2wJpv9nc&feature=youtu.be

Oooo!!! A beauty. Have one and i might say that is a very good balanced frame, offering a lot of space for big motors like the hexTronik DT750 Brushless Outrunner 750kv, easy access to flight controller and battery compartiment. Overall a Beauty!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Oooo!!! A beauty. Have one and i might say that is a very good balanced frame, offering a lot of space for big motors like the hexTronik DT750 Brushless Outrunner 750kv, easy access to flight controller and battery compartiment. Overall a Beauty!!!

Okay, I have a small issue with this bird, and it appears that many people have small issues with it. So, quality could be improved. Having said that, I love this bird! She's the new queen of the fleet, and I'm finding myself spending lots of time with her. I've loaded the FC up with MPNG, made a homemade platform for the GPS module, which looks very stealthy, mounted 505 RGB LEDs top and bottom, with a controller on a separate 350 mAH battery, Turnigy Aerodrive D2830-11 1000kv motors, which are adequate, if not stunning as far as power and speed goes. And the de riguer TGY-306G-HV servo at the yaw. I've also cannibalized my Hubsan X4 for it's HD camera, which is mounted at the fore. Pretty tricked out, and I'm probably not finished. I also plan to add nav lights, beacons and strobes. I might also mount some lasers...no, I'm not kidding...muahahahahahahaha!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Okay, I have a small issue with this bird, and it appears that many people have small issues with it. So, quality could be improved. Having said that, I love this bird! She's the new queen of the fleet, and I'm finding myself spending lots of time with her. I've loaded the FC up with MPNG, made a homemade platform for the GPS module, which looks very stealthy, mounted 505 RGB LEDs top and bottom, with a controller on a separate 350 mAH battery, Turnigy Aerodrive D2830-11 1000kv motors, which are adequate, if not stunning as far as power and speed goes. And the de riguer TGY-306G-HV servo at the yaw. I've also cannibalized my Hubsan X4 for it's HD camera, which is mounted at the fore. Pretty tricked out, and I'm probably not finished. I also plan to add nav lights, beacons and strobes. I might also mount some lasers...no, I'm not kidding...muahahahahahahaha!

i love this model it fly great i put the k2.1 board and 3 e flight 400 motor in it with 3 turnigy 30 amps speed control... As for the build not too bad i got in done in no time the only thing i wish it had was a back cover to hide the motor in the back but for the price no worries thanks hobbie king good job on this one..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i love this model it fly great i put the k2.1 board and 3 e flight 400 motor in it with 3 turnigy 30 amps speed control... As for the build not too bad i got in done in no time the only thing i wish it had was a back cover to hide the motor in the back but for the price no worries thanks hobbie king good job on this one..

Kit looks very good on the first view.
But on second view shows poor quality. The bulkhead for the tilt mechanism was glued in twisted. You need to install a spacer on one side (6-7mm) to get the tilt mechanism installed properly. In addition, the alloy bulkhead and motormount of the tilt mechanism are miss machined.Only one bore to install the motor. The other 3 are not cut properly.

In sum, a lot of rework needed to get all the quality issues fixed.
Hk, you need better quality inspection

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Kit looks very good on the first view.
But on second view shows poor quality. The bulkhead for the tilt mechanism was glued in twisted. You need to install a spacer on one side (6-7mm) to get the tilt mechanism installed properly. In addition, the alloy bulkhead and motormount of the tilt mechanism are miss machined.Only one bore to install the motor. The other 3 are not cut properly.

In sum, a lot of rework needed to get all the quality issues fixed.
Hk, you need better quality inspection

Received my C3 tricopter and I am very impressed.It is lightweight strong and well thought out I am installing the electronics and can not wait to fly it.
I hope all the team at Hobbyking have a great holiday season,thanks for another great value product and long may it continue happy flying everyone
and all the best for 2014.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received my C3 tricopter and I am very impressed.It is lightweight strong and well thought out I am installing the electronics and can not wait to fly it.
I hope all the team at Hobbyking have a great holiday season,thanks for another great value product and long may it continue happy flying everyone
and all the best for 2014.

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
Poor bulkhead installation Download [279]
Inpropper machining motor mount Download [396]
Impropper machining alloy bulkhead Download [239]
Yaw mechanism assembled with Corona919 Download [1960]
tricopter Download [3086]
TailDev Download [70]
CG test Download [2942]
Y3 tail servo tgy-306g Download [3065]
side view of tail servo Download [3029]
stock canopy underside Download [3117]
  1. 1
  2. 2
  3. 3
  4. 4
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save