The ZETA Sky Observer FPV Plane is based on the design of Israel’s “Skylark” Unmanned Aerial Vehicle, Zeta Science has developed this UAV/FPV model incorporating many new ideas and features with respect to its manufacture and operation.
All the main structure is made up using 3K wrapped carbon fibre tube and EPO foam over a wooden frame forming a strong and durable airframe that has stable flight performance.
Assembly of the plane is quite easy, the main prefabricated parts and wooden frame have been well built with just a few parts to glue together. Install motor, servos, receiver and battery of your choice and you’re ready to fly.
Removable wings and camera/electronics pod make this model convenient and easy to transport. The wings are locked in place using a plastic removable rivet. The camera/electronics pod is connected to the fuselage via its embedded structure and locked in place using a carbon fibre bar. You only need to disengage the snaps and pull out the bar then put your plane fits neatly into your car. The bottom of the camera/electronics pod comes equipped with a landing skid to protect the lower surfaces of the pod when landing.
The outward opening access side door on the camera/electronics pod allows for easy electronics and battery access, forward and rearward camera mount positions capable of accepting brushless gimbal or fixed camera mounts of your choice are standard
The plane features functioning flaps and molded slots to accept the carbon fibre spars with provision for more spars to be added for heavier all up weight flying. The vertical stabiliser can be either locked in the horizontal position or unlocked and connected to a servo to allow the complete stabiliser to operate for stall type spot landings. It is recommended to lock the horizontal stabiliser into the normal horizontal position when learning to fly the plane or when the all up weight of the plane is over the flying load is over 2800g.
The plane makes a perfect platform for FPV and or aerial photography being stable and predictable to fly. Team this performance up with a 3 Axis flight stabiliser style receiver and/or a flight controller and you’re in business for some real UAV/FPV adventures.
• Carbon Fibre and EPO Foam Construction
• Removable main wings and spacious camera/electronics pod
• Dual carbon fibre wing spars
• Pre cut slots in the wing for extra carbon fibre strengthening spars if required
• Optional flaps setup
• Unique horizontal stabiliser design for vertical/stall type landing approaches, great for small flying fields!
• Clear camera housing domes included
Wingspan: 2000mm (78.7in)
Length: 1511mm (59.5in)
Flying weight: 2500g~3000g
2.4G 7ch TX /7ch RX radio set
2-4S Balance Charger
12" x 6" propeller
Out-runner brushless 3542 850~950KV motor
60A ESC ESC
9g Analog servo x 4pcs
12g Analog metal servo x 3pcs
12g Digital metal servo x1pcs
Hmotnost ( g )