Registrieren

Product Finder

Einstellungen

Useful links

 
[["US","AU","GB","DE"]]
Registrieren
Shipped From:
  • Global
  • USA

Maßstab 1:10 Police Light Bar

Maßstab 1:10 Police Light Bar

QTY:

Now save Speichern 0,00 € 0,00 €

12,50 €
Stock:
Gewicht:
63 g
SKU:
258000019

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description

Alloy Top Polizeilicht Cluster-Look mit blau / rot LEDs auf der Vorderseite und Gelb / Blau leuchtet an der Rückseite blinkt, kommt mit Montagesatz und 2 x Schalter führt zur Veränderung des Blinkmuster sowohl der vorderen und hinteren LED, kommt auch mit einem PP 9 Batterieadapter, oder vom RX Stromversorgung mit Strom versorgt werden.

Specs:
Abmessungen: 114mm x 24mm x 6mm
Einheit Gewicht: 13g
Betriebsspannung: 3 V ~ 12 V

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    258000019
  • Brand:
    Nicht zutreffend
  • Gewicht ( g)
    63.00
  • Länge
    144.00
  • Breite:
    18.00
  • Höhe:
    70.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Not the best lights, but work fine. I would recomend them for a stealth install.
Quality
Value
Overall
Quality
Value
Overall
I have had this Light Bar for some time now and it doesn't get old. I get a lot of compliments on my vehicle. I just wish someone would come up with a way to control it remotely. I modified an old servo control to turn it on and off with my 3rd channel. All in all a nice little add-on.
Quality
Value
Overall
Quality
Value
Overall
Molto belle per le auto 1/10 e altro
Quality
Value
Overall
Quality
Value
Overall
The button control flashing mode for front and back, respectively (one each).

The selected mode is not stored on power off.

One side has 8 yellow/amber leds, the other 4 red and 4 blue.

Each has 9 different flashing modes, but the lists seem to be reversed. To have the same mode on both sides, you need to press the button once for side a and 8 times for side b!

LEDs have lenses and are quite bright, they are SMD types and sit on small pcb stripes mounted 90s on a control board. Mine were not really in a line, when you look in the beams you'll notice some lamps are dim, because they have small angles.

The bottom of this control board is flat, the cable hole is slightly out of center, the board is shorter than the case.

The case is clear plastic with a silver painted top, but needs a little dremel work: the screw tunnels are to wide to fit between the LED pcbs.
Quality
Value
Overall
Quality
Value
Overall
looks and works amazing, just wish there was an alternate power source or adapter to run of the receiver or balance plug
Quality
Value
Overall
Quality
Value
Overall
Very good item.
Easy to attach, and you can get power from your battery's balance plug if you are using 2s/3s.

The only reason i wont give 5 stars is that the police bar itself is only covered on one side. Its completely open on the bottom, wich means exposed to dirt/water.
If it was in a solid enclosure, then 5 out of 5.
Quality
Value
Overall
Quality
Value
Overall
Excellent piece of Bling, fit it to any model easy to put together and to mount, dont restrict yourself to the top of a car, let your imagination flow and use it on any type of RC model. Light weight and slim compact build lends itself to many other projects apart from cars, mounted side ways ie in line with the fuselage of and airplane or helicopter really aids the identification of where the craft is at any stage just good kit and really cheap for what it is.
Quality
Value
Overall
Quality
Value
Overall
Arrived in a nice display pack with basic instuctions. I was able to run these from the blaance port of my lipo battery. These lights have an operating Voltage of 3-12v. One button controls the front red and blue lights and the other is for the rear amber lights. The bottom of the lights are open and should be covered to prevent dust and debry from getting in the housing. I used a dremel to cut a bottom plate out of the case that came with the lights and sealed it with some clear RTV. The case could easily be cut with a hobby knife also.
Quality
Value
Overall
Quality
Value
Overall
Fantastic item. I use them all the time. In planes, in quadcopters, in cars, in boats - you name it. Nice durable gadget.
Quality
Value
Overall
Quality
Value
Overall
I put this on my quad and it looks badasss
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.