Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren

1.2GHz 100mW Video Sender und Empfänger Combo

1.2GHz 100mW Video Sender und Empfänger Combo

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
18 g
SKU:
381000151

Combine

essential items and
acc
Product
Description

Dies ist die perfekte Größe für Micros und Spezial Anwendung, wo Sie die bessere Durchschlagskraft und Reichweite des 1,2-GHz-Band müssen aber die Größe ist begrenzt. Das Set ist abgestimmt und einwandfrei zusammen zu arbeiten und verfügt über 4 Kanalselektivität abgestimmt. Ihre Fähigkeit, so günstig wie 3,3 V zu arbeiten macht dies perfekt für einzelne Zellanwendungen. Zeit zu gestalten, einige Spion Gang oder Mikro FPV Fliegen Aktion up !!

Video Sender Specs:
Spannung: + 3,3 ~ 5,0 V
Stromverbrauch: 85mA, Max
Betriebstemperatur: -10 ~ + 70 ° C
Sendefrequenzbereich: 1280 ~ 1360MHz
Voltage Standing Wave Ratio: 2: 1
Modulationssystem: FM / PLL
ANT Ausgangsimpedanz: 50Ω, Typ
LO Frequenzstabilisierung: ± 100 kHz
LO Frequenz Genauigkeit: ± 200 kHz
LO - Steuerung: PLL
Sendeleistung: 17dBm (100mW)
Video - Eingangsimpedanz: 75Ω, Typ
Video Polarität: NEGATIVE
Video Frequenzgang: ± 5 dB, Max. 50Hz ~ 6MH z
Kanäle: 1280, 1300, 1320, 1340Ghz
Größe: 18 x 8 x 3,5 mm
Gewicht: 2 Gramm (mit Stecker)

Empfänger Spezifikationen:
Spannung: + 3,3 ~ 5,0 V
Stromverbrauch: 120mA, Max
Betriebstemperatur: -10 ~ + 70 ° C
Empfangen von Frequenzbereich: 1280 ~ 1340MHz
Voltage Standing Wave Ratio: 2: 1
Demodulationssystem: FM / PLL
ANT Eingangsimpedanz: 50Ω, Typ.
LO Frequenzstabilisierung: ± 100 kHz
LO Frequenz Genauigkeit: ± 200 kHz
LO - Steuerung: PLL
Eingang LO Leckage: -55dBm
Empfangsempfindlichkeit: - 85dBm
Eingangspegelbereich: -85 dBm ~ + 5 dBm
Video Ausgangsimpedanz: 75Ω, Typ.
Video - Ausgangspegel: 1Vss, Typ.
Video Polarität: Negative
Video Frequenzgang: ± 5 dB, Max. 50Hz ~ 6MHz
Differential Gain: ± 5%, Max
Differential Phase:. ± 5 Grad, Max
Kanäle: 1280, 1300, 1320, 1340
Größe: 26,8 x 23,2 x 2,8 mm

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    381000151
  • Brand:
    Nicht zutreffend
  • Kapazität ( mAh)
    Nein
  • Gewicht ( g)
    18.00
  • Länge:
    60.00
  • Breite:
    10.00
  • Höhe
    50.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very light VTX - only 1.1g with shorter lead & smaller plug. have had some success with a WLToys v212 & 808 #16 camera, now trying with a 2g camera on a V252 (Hubsan X4 clone). Would buy another if they ever come back in stock !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
When you keep in mind this tiny transmitter's intended use (close range) and it's 19.99 price, it's just great! Yes the soldering is very weak but you're going to need great soldering skills for FPV anyway. It fits great in an SD card case and it's a blast for micro FPV at close range. See a couple of pictures I posted under the Files tab.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very very good i checked it all over my house with alot of walls and it is working bestter than boscam 5.8 200 mw the picture seems to be stable and powerful just be carefull with wiring and polarity
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Soldering quality sucks badly on RX. It came with 2 loose wires (video and GND). REALLY hard to solder them back.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Neat little set, if you can run 1340MHz in your area. HobbyKing needs to provide instructions on how to change channels, since they're listed in the product specs for the vTx and vRx. Otherwise remove them and advertise as a single channel set - 1340.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Operating frequency is 1340 MHz,(I uploaded picture- checked with frequency analyzer) unless there's a way to change channels with the solder pads, but I've read you might fry it if you try to change channels with pads. It takes a few connect/disconnect cycles for the Rx to get and send the video signal to a screen. "Channels: 1280, 1300, 1320, 1340Ghz" description is misleading. Perhaps someone can figure out how to change channels on Tx. I tried the Rx with a 1280MHz Tx and it would tune to 1280MHz, seems it defaults to 1340MHz, pitty that's just outside the legal amateur frequency in the US and even Int'l:
1300-1350
AERONAUTICAL RADIONAVIGATION
5.337
Radiolocation G2
5.337 The use of the bands 1300-1350 MHz, 2700-2900 MHz and 9000-9200 MHz by the aeronautical radionavigation service is restricted to ground-based radars and to associated airborne transponders which transmit only on frequencies in these bands and only when actuated by radars operating in the same band.

5.337A The use of the band 1300-1350 MHz by earth stations in the radionavigation-satellite service and by stations in the radiolocation service shall not cause harmful interference to, nor constrain the operation and development of, the aeronautical-radionavigation service

I tried running at same time with a 1280MHz Tx and it was possible to receive both signals with little interference at close range
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little kit if your after a very lightweight fpv setup. Works well with the micro camera with led in the recommended accessories.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • 1.2GHz Video Transmitter

Upload video
Upload
Files

Combine

essential items and
acc

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.