Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

32mm Legierung Faltpropeller Spinner mit 2,3 mm / 3 mm / 3,17 mm Adapter

32mm Legierung Faltpropeller Spinner mit 2,3 mm / 3 mm / 3,17 mm Adapter

Shipped From:
  • USA
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

6,08 €
Status:
Auf Lager
SKU:
32FPSPIN
WANT FREE SHIPPING? Click here to find out more!

32mm Durchmesser Legierung Spinner für Faltpropeller, kommt mit Adaptern für 2,3 mm, 3 mm und 3,17 mm Motorwellen.

Prop Montage Schrauben: 2.2mm
Gewicht: 17 g

  • Artikelbezeichnung 32FPSPIN
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 28.0000
  • Länge 80.00
  • Breite 30.00
  • Höhe 60.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Satisfactory.

Nowhere in the world can not get this price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Satisfactory.

Nowhere in the world can not get this price.

no matching propeller blades available ! :( was hoping to mix 'n' match with a previous purchase that lacked the prop shirt adapter size i needed, but no such luck - nice quality anyway, my mistake

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

no matching propeller blades available ! :( was hoping to mix 'n' match with a previous purchase that lacked the prop shirt adapter size i needed, but no such luck - nice quality anyway, my mistake

Kuel pre mj vetro specter z HK.Pekne spracovan

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Kuel pre mj vetro specter z HK.Pekne spracovan

I use this spinner on a Passer-X electric glider. It spins true and was just a little off balance. The blade mounting bolts on my spinner is 2.3mm in diameter and the gap for holding the blades are 6.3mm so it will be ok for propeller blades with 6mm base. The flange on the spinner back plate that compresses the collar has an 11mm outer diameter. If you are mounting the spinner very close to the motor you have to make sure that there is at least 11mm between the motor mounting screws. I drilled and tapped the blade holders to accommodate 3mm screws because my blades have 3mm holes at the base. All in all an ok product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this spinner on a Passer-X electric glider. It spins true and was just a little off balance. The blade mounting bolts on my spinner is 2.3mm in diameter and the gap for holding the blades are 6.3mm so it will be ok for propeller blades with 6mm base. The flange on the spinner back plate that compresses the collar has an 11mm outer diameter. If you are mounting the spinner very close to the motor you have to make sure that there is at least 11mm between the motor mounting screws. I drilled and tapped the blade holders to accommodate 3mm screws because my blades have 3mm holes at the base. All in all an ok product.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!