Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

3RACING 1/10 RC Crawler EX REAL Kit

Generating Links

3RACING 1/10 RC Crawler EX REAL Kit

Preis:

Now save speichern 16,16 € 16,16 €

Special Price 144,03 € 144,03 €

You save speichern 16,16 € 16,16 €

Was  160,19 €

Menge:
Versendet aus:
  • Global
Bereits gekauft
Voraussichtliche Ankunftszeit: End October 2021 [ ? ]
Status:
Rückstand
SKU:
388000207-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

Overcome the harshest terrain with this high-quality 1/10 scale all-wheel drive. Designed with realistic front and rear bumpers, the RC crawler looks fantastic as it takes on rocky outcrops, gravel and rugged hills. Fitted with a waterproof receiver case, the EX REAL Kit can even be used on soggy terrain.

 

Made with high-quality materials, the RC crawler features metallurgy gears and solid metal axles to prevent wear and tear. The 3RACING crawler also includes stealth body mounts, 1.4mm thick C-channel frame, knuckles and diff cases. Created with precision, this crawler is built to last.

 

The all-wheel drive also features an adjustable wheelbase and can be modified to fit 255 - 325mm. Enjoy more resistance with the realistic 2-speed gearbox and middle transfer case. The EX REAL kit also includes big bore aluminum oil dampers, adjustable battery tray, and beadlock rims with realistic rubber tires. The crawler has 12° kingpin inclination and adjustable 20° camber to help you go that extra mile.

 

Features:
• Realistic front and rear bumpers. 
• Basic waterproof receiver case
• Powder metallurgy gears and metal solid axles
• Stealth body mounts
• 75mm big bore aluminum oil dampers
• 1.9 inches beadlock rims with realistic rubber tires
• Knuckles and diff cases
• 1.4mm thick C-channel frame
• 2.0mm FRP adjustable battery tray
• Realistic two-speed gearbox and middle transfer case
• 12° kingpin inclination and adjustable 20° camber
• Adjustable wheelbase from 255 - 325mm

 

Specs:
Overall Length: 410mm
Overall Width: 205mm
Wheel Base: 275mm
Weight: 1600g
Gear Ratio: 2.6:1 ; 1.69:1
Ground Clearance (Mid Point): 69mm
Ground Clearance (Front Diff): 32mm

 

Requires:
Steering Servo
Gearbox Servo
Receiver
Battery
ESC
Radio Set
Car Body
Hex Wrench
Pliers
Wire Cutter
Hobby Knife

  • 3RACING RC Crawler EX REAL Kit - HobbyKing Super Daily
  • Kyosho Big Brute body
  • 3racing 1/10 RC Crawler EX REAL | Unboxing | Lots for less!
  • 3Racing Ex Real Crawler Ex Build (EP1)
  • 3Racing Ex Real Crawler Ex Build (EP2)
  • 3Racing Ex Real Crawler Ex Build (EP3)
Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

Mickeys_rc_crawl | Verifizierter Käufer

  • Quality
  • Overall
  • Value

Sweet kit and cheap as well

Sep 28, 2021

Just buyed this model for my d90 body, and its sweet, and special for the price. Tires and rims now the best if you will trail and rockcrawl for real. But for starters its one of the better kits.
Taken sevel pic on my insta and later movie on my youtube channel mickeys rc crawl

Helder | Verifizierter Käufer

  • Quality
  • Overall
  • Value

Good value

Apr 08, 2021

Well packed, well labelled. A fun build. I would recommend!

Dr Zoo | Verifizierter Käufer

  • Quality
  • Overall
  • Value

Great product

Apr 02, 2021

The kit arrived quickly and safely and was well packaged. The quality of the parts was excellent and the instructions were very clear and easy to understand. With time and patience the model has come together very well. Some of the plastic parts could have been better if they had been metal, but overall the parts were well made.

Matyas | Verifizierter Käufer

  • Quality
  • Overall
  • Value

Fair chassis, minor complaints

Feb 07, 2021

Most important: Throw out the supplied screws! They're of the sh1ttiest chinese smearsteel. Buy some decent ones instead. One star off.
The ball joints are so loose fitting they make the axles wobble about half a centimeter sideways. Another star off...
The rest is fine. Except that the bearing's fit is also too loose. This can easily be remedied with some shims and/or loctite.
Good part:
Looks are the best among what i've seen. Many possibilities to mod and real fun to build.

Deadmeat | Verifizierter Käufer

  • Quality
  • Overall
  • Value

Nice rig

Jan 31, 2021

Nice quality kit. All gears are metal and run smooth. Full bearings and quite nice shock, sure the shock caps are on tight.
Screws were nicely packaged by assembly item in Manuel. Some of the screw counts were off, might just have been me though.
Quality is up there with the big 3.
I really like this model. I am using it for a scale build.

Bob A | Verifizierter Käufer

  • Quality
  • Overall
  • Value

Good entry level crawler !

Dec 09, 2020

Good entry crawler, easy to build, you must read and follow the instructions carefully, it’s a fun build. I would recommend!

Mal | Verifizierter Käufer

  • Quality
  • Overall
  • Value

How does it hold up!

Sep 13, 2020

So. For the price, this is a very good spec of rig. It does suffer from low quality materials however. (Screws are made from cheese)
On opening the box, it was impressive. Well packed, well labelled etc.
Building was actually pretty easy too. But the shocks were machined incorrectly and one couldn’t be assembled at all. (Shaft cut too short)
On my build I used a hobbywing 1080 esc and a 3s lipo. 2x 35kg servos.
I found a shell from a coyote fit well with 5mm Spacers on the 4 rear links.
Unfortunately this is where things went wrong. On my first run out, the spur stripped and the gear selector stripped too, all within 15 mins. Out of the whole gear train. These bits are plastic as opposed to metal. Spares are hard to come by and it’s about 4 weeks from China for more.
The magnetic body mounts are great, but more suited to trailing than crawling (only because it’s easy to knock off), and the motor is 35t. This is way too fast.
I’ve now changed the wheels to 105mm. Added weighted wheels and brass links.
I’ve changed the motor to a 55t and fitted different shocks with duel springs.
The supplied pinion is 18t. If you build as per the instructions the mesh is terrible. This was my stripping problem. If you fit the motor using the 17t holes it is much better.
Now it’s really capable. The biggest problem is spares and how they are only available from China.
Hope this helps.
In summary. Great rig for the price but be prepared to modify it and replace poor quality parts. It’s worth sticking with in my opinion and it’s nice to have something different to everyone else.

Rjag | Verifizierter Käufer

  • Quality
  • Overall
  • Value

Happy with product

Sep 09, 2020

OK, let's get two negatives out of the way. The button screw heads are soft and if your Allen driver is not pristine, you will round the heads out on some. The info claims adjustable wheelbase but what you get is 11 in (very short) and the frame has room to go larger but you'll need to buy additional parts such as driveshaft and longer rear axel linkage. That being said, the kit was a joy to build with excellent instructions. Nothing is top end but for the price, it can't be. It's a great place to start if you want to modify for odd bodies and even with the small scale-like wheels and tires, it climbs quite well. Yes, I'd buy another. BTW, do not use DHL for shipping. They ripped me off for additional fees that were not listed in the choices of which carrier to use for shipping. They then delivered to the wrong address. The people there delivered it to me the next day on their own. DHL took two more days to even tell me they'd go get it.

Marchie | Verifizierter Käufer

  • Quality
  • Overall
  • Value

Great value

Jul 16, 2020

One of the best 4 wheel drive crawlers for the money.
Well made and easy to assemble.

Frank | Verifizierter Käufer

  • Quality
  • Overall
  • Value

3racing 1/10 RC Crawler EX REAL

Jul 09, 2020

Unboxing of this 3Racing 1/10 RC Crawler EX REAL.
It is unbelievable what you get for this price!
https://youtu.be/5UmXjt3HhaQ

  1. 1
  2. 2
  3. 3
Kundendateien
Manual Download [17]
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!

Zubehör