Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

4A UBEC w / Low-Voltage-Horn

4A UBEC w / Low-Voltage-Horn

Discontinued Product

Please continue searching for a similar product.
Gewicht:
45 g
SKU:
UBECH
WANT FREE SHIPPING? Click here to find out more!

Dieses ist nicht eine normale UBEC.
Es kann 4Amp zeichnen handhaben und kommt mit einer niedrigen Spannung Warnsummer. Sollte Ihr Pack Drop auf unter 3 Volt pro Zelle ertönt der Summer, sagen Sie seine Zeit, um Ihr Flugzeug zu landen, bevor Sie Ihre teuren Lipo Pack töten.

Die UBEC kommt mit einem erweiterten Abschnitt der PCB, können Sie dies der UBEC zu helfen verwenden montieren oder Sie können es einfach abgeschnitten.

Obwohl dies ein UBEC ist und verarbeiten kann bis zu 23V, wird ihr Warnsystem nur für 2cell entworfen. Einige würden erwägen, einen UBEC für 2cell als Overkill verwenden, aber es sorgt für einen stabilen Strom, weniger Wärme und eine höhere Stromstärke verwendet werden kann.

Diese UBEC kann mit verwendet werden, bis Eingang zu 23V. Wenn Sie eine 2 Zellenpackung nur verwenden, wird es Sie warnen auch, wenn Ihre Zellen pro Zelle bis 3 V fallen.

  • Artikelbezeichnung UBECH
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht ( g) 45.00
  • Länge 0.00
  • Breite 0.00
  • Höhe 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Type your review here.

Try to include as much data as possible.Trying to use this ubec with futaba 2.4 rx ..But cannot get right connections to limit 5.0v output ..do not get any reaction from receiver servos ( unless the ubec is defective ) How should correct connections be made ? battery male plug to ubec ..ubec male plug to receiver does not seem to work ?? Plse advise correct connections for airplane operation ?? could e-mail direct to ernesttd@sympatico.ca ...thank you

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Type your review here.

Try to include as much data as possible.Trying to use this ubec with futaba 2.4 rx ..But cannot get right connections to limit 5.0v output ..do not get any reaction from receiver servos ( unless the ubec is defective ) How should correct connections be made ? battery male plug to ubec ..ubec male plug to receiver does not seem to work ?? Plse advise correct connections for airplane operation ?? could e-mail direct to ernesttd@sympatico.ca ...thank you

Tolles Gert.

Ich nutze es als berwachung eines 2 zelligen Lipos und Versorgung

eines mit vier Servos angetriebenen Ruderbootes.

Der Buzzer ist unheimlich laut.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tolles Gert.

Ich nutze es als berwachung eines 2 zelligen Lipos und Versorgung

eines mit vier Servos angetriebenen Ruderbootes.

Der Buzzer ist unheimlich laut.

too big for my plane but perfect for my 1W 2,4gHz booster.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

too big for my plane but perfect for my 1W 2,4gHz booster.

I'm using it on DL 50CC ignition with a Life 6.6v 1100.

No problens , exepect for the fact that Life batt have lower voltage than lipos , so i removed the beep.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm using it on DL 50CC ignition with a Life 6.6v 1100.

No problens , exepect for the fact that Life batt have lower voltage than lipos , so i removed the beep.

Excellent gizmo. Also has a jumper to set either 5 or 6 v output.Fitted LiPo to all my planes now, and this device too !!
put it in a nitro car to regulet the lipo for my reciever ,work perfect!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent gizmo. Also has a jumper to set either 5 or 6 v output.Fitted LiPo to all my planes now, and this device too !!
put it in a nitro car to regulet the lipo for my reciever ,work perfect!!

is used in combination with 2S 1300 Turnigy and makes good impression. shortened the plate around 2cm because not needed and less size of the part.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

is used in combination with 2S 1300 Turnigy and makes good impression. shortened the plate around 2cm because not needed and less size of the part.

Good product, but pay attention to the real voltage.

With the jumper in the right = 5,27 V, with the jumper in the left = 6,22 V

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good product, but pay attention to the real voltage.

With the jumper in the right = 5,27 V, with the jumper in the left = 6,22 V

This is a good product! it does exactly what it says, saves your packs from melting down without you even knowing it!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a good product! it does exactly what it says, saves your packs from melting down without you even knowing it!

Very good BEC. Congratulations to HobbyKing!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good BEC. Congratulations to HobbyKing!

il fait le boulot ! attention de bien vrifier la position du cavalier et du voltage de sortie avant de le brancher sur le rcepteur !!!!! et bien immobiliser le cavalier (colle ou autre) !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

il fait le boulot ! attention de bien vrifier la position du cavalier et du voltage de sortie avant de le brancher sur le rcepteur !!!!! et bien immobiliser le cavalier (colle ou autre) !

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Customer files
No File Name Download [252]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!