Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

7 Zoll 800 x 480 5,8GHz Diversity-Empfänger & TFT LCD FPV-Monitor mit LED-Hintergrundbeleuchtung SkyZone

7 Zoll 800 x 480 5,8GHz Diversity-Empfänger & TFT LCD FPV-Monitor mit LED-Hintergrundbeleuchtung SkyZone

Now save Speichern 0,00 € 0,00 €

116,53 €
Status:
Ausverkauft!
Gewicht:
998 g
SKU:
263000013
WANT FREE SHIPPING? Click here to find out more!

Das 5,8 GHz Diversity-LCD-Bildschirm bietet die perfekte Lösung für jede 5,8GHz FPV-System. Es verfügt über einen eigenen eingebauten 2-Kanal 5,8 GHz A / V-Receiver, so dass sie direkt von Ihrem FPV-Modell des A / V-Sender zu empfangen! Das bedeutet, es die Notwendigkeit für teure FPV Brille beseitigen kann, oder einfach als eine Möglichkeit verwendet werden, um FPV Modell des Videos angezeigt werden, für andere zu sehen, wie Sie fliegen.

Mit Dual-A / V-Ausgänge, ist dieser Monitor fähig ist zugleich das Signal der beiden HF-Kanäle ausgibt. Es verfügt auch über einen A / V-Eingang sowie einen Tracker Link-Port.

Mit echten 5,8GHz Vielfalt bietet dieses Gerät die automatische Antennenschalt den besten Empfang zu bieten. Ein faltbarer Bildschirm Verkleidung ist im Preis enthalten Betrachtung bei hellem Licht zu optimieren.

Eigenschaften:
• 800 x 480 hochauflösenden TFT-LCD-Bildschirm
• Integrierter 5.8GHz Dual-Switching-Empfänger
• Dual-Buffered A / V-Ausgänge
• geeignet zum Empfang von zwei verschiedenen Kanälen gleichzeitig
• Nicht von 2,4 GHz R / C Sender Signale Betroffene
• Leicht und haltbar
• 9 Sprache Menüauswahl

Arbeitsfrequenzen:
CH1: 5705MHz
CH2: 5685MHz
CH 3: 5665MHz
CH4: 5645MHz
CH5: 5885MHz
CH6: 5905MHz
CH7: 5925MHz
CH8: 5945MHz

Specs:
Bildschirmgröße: 7,0 Zoll
Schirm - Art: TFT LCD
Hintergrundbeleuchtung - Art: LED
Auflösung: 800 x 480
Helligkeit: 450cd / m²
Kontrast: 500: 1
Betrachtungswinkel: 140/120 ° (horizontal / vertikal)
Betriebsspannung: DC 7 ~ 12V oder 11,1V LiPoly Batterie
Arbeitstemperatur: -10 ° C ~ + 65 ° C
Leistungsaufnahme: <8W
Größe: 180 x 120 x 23mm
Antennenanschluss: SMA


Im Lieferumfang
sind enthalten:
7,0-Zoll 5,8 GHz Diversity-TFT-LCD-Monitor
Außen Bildschirm Verkleidung
JST Netzstecker Adapterkabel
A / V-Kabel

** Viele gefälschte, schlechte Qualität und nicht getesteten FPV Produkte treten derzeit den Markt. Lassen Sie sich nicht mit schlechter Qualität ersetzt, SkyZone FPV Ausrüstung ertappt wird altbewährten und wurde von FPV - Piloten für FPV Piloten getestet und entwickelt.

  • Artikelbezeichnung 263000013
  • Brand HobbyKing
  • Kapazität ( mAh) -
  • Gewicht ( g) 998.00
  • Länge 210.00
  • Breite 65.00
  • Höhe 160.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I have got on one, no tracker, only 1 A / V output, with no menu languages. This is not all like the pictures !!!!!!! one received is a SKY-702. I am very disappointed dude this command. heuresement it works but not worth it at all * 108.60

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have got on one, no tracker, only 1 A / V output, with no menu languages. This is not all like the pictures !!!!!!! one received is a SKY-702. I am very disappointed dude this command. heuresement it works but not worth it at all * 108.60

Bad bad bad. nothing works! return warranty.
Qualit scadente ed arrivato guasto sin da subito. rispedito per la garanzia.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bad bad bad. nothing works! return warranty.
Qualit scadente ed arrivato guasto sin da subito. rispedito per la garanzia.

good product, good image quality, coverage for the sun imprecise.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good product, good image quality, coverage for the sun imprecise.

This screen is a "Must Have" for FPV pilots who don't want to use goggles or want to share their FPV flight with someone else while airborne. The reception quality and the picture quality is fantastic! I'm running the two standard antennae and had no blue screens or drop outs at about 250metres LOS. It shows the iOSD Mini Overlay perfectly from my GoPro H3! The only thing you need is an M6 Bolt to mount it to your Tripod. I took the standard camera screw out of my tripod as the thread is different, bought an M6 and cut it to about 5-6mm of thread length and works perfectly. Now my clients a an see what my camera is seeing also and it usually draws a crowd while I'm doing AP/AV.
I can highly recommend this as Boscam FPV Gear is always great quality and value for money. Thanks HobbyKing for bringing this to market at a competitive price.
Very happy FPV Pilot! :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This screen is a "Must Have" for FPV pilots who don't want to use goggles or want to share their FPV flight with someone else while airborne. The reception quality and the picture quality is fantastic! I'm running the two standard antennae and had no blue screens or drop outs at about 250metres LOS. It shows the iOSD Mini Overlay perfectly from my GoPro H3! The only thing you need is an M6 Bolt to mount it to your Tripod. I took the standard camera screw out of my tripod as the thread is different, bought an M6 and cut it to about 5-6mm of thread length and works perfectly. Now my clients a an see what my camera is seeing also and it usually draws a crowd while I'm doing AP/AV.
I can highly recommend this as Boscam FPV Gear is always great quality and value for money. Thanks HobbyKing for bringing this to market at a competitive price.
Very happy FPV Pilot! :)

I just receive mine and it seems to me to be refurbished.
The case has some strange tiny plastic parts broken on the side.
The mounting thread is unusable and weirdly fitted in the case.
The menu language was in Chinese.
It seems that there is a protection film on the screen, but I can't remove it since it's been put on before the front part of the case so the borders are embedded in the case.

The sound was broken (loud noise) and can't be disable, but after few on/off the sound is now fixed and works correctly with GoPro and TS-353 transmitter.

The overall quality is quite poor but for that price this screen do the job correctly.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just receive mine and it seems to me to be refurbished.
The case has some strange tiny plastic parts broken on the side.
The mounting thread is unusable and weirdly fitted in the case.
The menu language was in Chinese.
It seems that there is a protection film on the screen, but I can't remove it since it's been put on before the front part of the case so the borders are embedded in the case.

The sound was broken (loud noise) and can't be disable, but after few on/off the sound is now fixed and works correctly with GoPro and TS-353 transmitter.

The overall quality is quite poor but for that price this screen do the job correctly.

Cheap plastic parts, the mounting hole is badly drilled and out of order on my screen, the screen hood is not better (can t plug the battery, the hole is not at the right place), but despite all these defects, I love this screen. The picture is clear and bright, the receivers work well, for the price... You can t ask more !
And a volume control would be appreciated !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Cheap plastic parts, the mounting hole is badly drilled and out of order on my screen, the screen hood is not better (can t plug the battery, the hole is not at the right place), but despite all these defects, I love this screen. The picture is clear and bright, the receivers work well, for the price... You can t ask more !
And a volume control would be appreciated !

I got this and DC connection on side of LCD broke after only few flights. I read on board that this has happend to others after only first few flights. I went through long process of returning it and getting refund. Be careful if you get this because DC connector seems to be shoddy quality.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I got this and DC connection on side of LCD broke after only few flights. I read on board that this has happend to others after only first few flights. I went through long process of returning it and getting refund. Be careful if you get this because DC connector seems to be shoddy quality.

Pros: Cheap, comes with a hood. Works well when things actually work.
Cons: Reliability. The power connector is very average and the device loses power when the cord wiggles around. I am contemplating removing the jack and just soldering some wire direct. Also, one of the screw heads was stripped from factory, making it impossible to fully open. The tripod jack is completely useless as the threads are almost non existent. The sun hood is great, however the power jack and the hole in the hood do not align, therefore I had to hack mine up a bit!

Overall: Good, but just a few *simple* things could make this product perfect.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pros: Cheap, comes with a hood. Works well when things actually work.
Cons: Reliability. The power connector is very average and the device loses power when the cord wiggles around. I am contemplating removing the jack and just soldering some wire direct. Also, one of the screw heads was stripped from factory, making it impossible to fully open. The tripod jack is completely useless as the threads are almost non existent. The sun hood is great, however the power jack and the hole in the hood do not align, therefore I had to hack mine up a bit!

Overall: Good, but just a few *simple* things could make this product perfect.

This is something I have looking at for a while. They were sold out for a while and I was really on the fence with goggles. Turns out the goggles came available at the same time as this unit and I opted for diversity.



The fatshark goggles are great but I'm going to wait until the new ones release in July with wide! 45 degree FOV. that would make it worth it. And maybe they will strip them down to be just slave goggles that I could plug into my diversity setup once I get or make cp antennas.



Good luck!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is something I have looking at for a while. They were sold out for a while and I was really on the fence with goggles. Turns out the goggles came available at the same time as this unit and I opted for diversity.



The fatshark goggles are great but I'm going to wait until the new ones release in July with wide! 45 degree FOV. that would make it worth it. And maybe they will strip them down to be just slave goggles that I could plug into my diversity setup once I get or make cp antennas.



Good luck!

I have a few flights on this monitor now and am very happy with its performance. Clear bright image and the diversity is doing its job. I purchased a transmitter mount from another site and now instead of lugging around a tripod and base station case and setting it up I just turn this on and go flying. I wear glasses and also like to look up from time to time so this was a better option for me than the fatsharks. I should mention that I did have to open it up to resolder the diversity indicator leds with were not quite working 100pcnt. The threads in the mounting hole were a bit rough as well but that's also an easy fix. This monitor goes to static on a poor signal and a blue screen after a few seconds for a total loss of signal.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have a few flights on this monitor now and am very happy with its performance. Clear bright image and the diversity is doing its job. I purchased a transmitter mount from another site and now instead of lugging around a tripod and base station case and setting it up I just turn this on and go flying. I wear glasses and also like to look up from time to time so this was a better option for me than the fatsharks. I should mention that I did have to open it up to resolder the diversity indicator leds with were not quite working 100pcnt. The threads in the mounting hole were a bit rough as well but that's also an easy fix. This monitor goes to static on a poor signal and a blue screen after a few seconds for a total loss of signal.

  1. 1
  2. 2
Customer files
Manual for RC701 Monitor with RX Download [763]
Dipper Switch Diagram Download [139]
Dipper Switch Selection Chart Download [166]
9x, Base SD and 7" Diversity Receiver Download [232]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save