Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

8-9 Zoll Verstellpropeller-Setup w / Gestänges und Mount

Generating Links

8-9 Zoll Verstellpropeller-Setup w / Gestänges und Mount

Preis:

Now save speichern 0,00 € 0,00 €

28,46 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
095000048-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

8 ~ 9 - Zoll - Verstellpropeller für Schaum Flugzeuge.
Für die ultimative Indoor-4D Flugleistung, suchen Sie nicht weiter als die 4D VPP-System von Hobbyking bietet Rückwärtsflug, vertikale Rollen, mitten in der Luft angehalten und so weiter. Dieses Gerät verfügt über zwei Größen der Klinge in der Box 8 und 9 Zoll, Kohlefaser Halterungen und harten Kunststoff-Fittings.
Dies ist eine leichte Einheit geben Flexibilität für nahezu jede Art von Innen-Schaum Zelle eingerichtet. Sie können den Servo für "VP" haben montiert vorne oder eine Schubstange verwenden, müssen sie aus den Augen versteckt.

Eine wirklich schöne, ordentlich und vielseitige Gerät ohne Motor Änderung erforderlich.

Eigenschaften:
• Einfache und schnelle Montage
• Kohlefaser-Komponenten

spec:
Blatt - Größe: 8 Zoll (207mm) 9in (233mm)
Winkelbereich VP: ± 15 °
Gewicht: 16 g
Servo: 5 g-8g
Anwendbar Motorgröße: 2204, 2206, 2208, 2212

  • Propeller Durchmesser X (Inch ) 8.00
  • Pitch Y (Inch ) 0.00
  • Drehung CCW
attributeset-13
Close

Dimension Diagram Guide

  • attributeset-13

Close

Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

Billy Shaw | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 09, 2015

not the best, but works , make sure to take the time to tighten all the bolts and make sure to take time to set up the curves

JaRa5xxx | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 03, 2013

Nice system!

You can mount the servo directly on the supported CF mount or on the fuselage and control pitch with a pushrod.

I had to make one correction though: the recess in the prop hub that leads the propeller root was too narrow near the full positive pitch position, causing the hub to bind. I had to sand it a little so the hub could move freely over the full range.

Note that the hole for the propeller shaft in the hub is only 3mm, so you carefully need to widen it with a reamer or drill if you want to use a motor with a 3.14mm shaft. It would be great if HK could support a 3.14mm hub.

I recommend to use the innermost hole on the servo arm to control pitch. The range is then just sufficient for that and you want to use maximum servo force anyway. When I connected it to the 2nd hole of a TGY1440A, I couldn't get full negative pitch at high RPM. If the horn is too long, it may also flex under load, causing the control bearing to tilt and slow the propeller down.

Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!