Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

900MHZ 800mW Tx / Rx & 1/3-Zoll-CCD-Kamera NTSC

Generating Links

900MHZ 800mW Tx / Rx & 1/3-Zoll-CCD-Kamera NTSC

Preis:

Now save speichern 55,10 € 55,10 €

Special Price 26,93 € 26,93 €

You save speichern 55,10 € 55,10 €

Was  82,03 €

Bereits gekauft

Leider ist dieses Produkt in Ihrem Land nicht verfügbar

SKU:
CN80012RX8T
Kostenloser Versand? Klicke hier um mehr zu lernen!
12 Kanal 900Mhz Tx / Rx-Videosystem mit CCD-Kamera.
Ein High-Power-tx-System für die lange Strecke, klare Video.
Im Gegensatz zu anderen generischen Systemen haben wir einen Kabelbaum hergestellt und enthalten es mit der Kamera, so dass die Tx und Kamera kompatibel und auf der gleichen Spannung liegen.
Wenn Sie Ihre Kamera kaufen und Tx separat die Stecker Polarität und Spannungen können sehr unterschiedlich sein.
Inbegriffen.
1 x SONY CCD-1/3 Zoll Kamera
1 x 900 MHz 8-Kanal-Video-Sender (800mW)
1 x 900 MHz 12-Kanal-Video-Empfänger


Kamera spec.
CCD-Sensor-Typ: 1/3 Farbe SONY CCD
Pixel;
NTSC: 510 (H) * 492 (V) ( im Lieferumfang enthalten)
PAL: 500 (H) * 582 (V)
Scannen-System: Interlaced Scanning
Synchronisation: System: Inter
Horizontale Auflösung: 420 TV-Linie
Minimale Beleuchtung 0.01Lux / F1.2
DSP + CCD: CXD3142R + 405AK
S / N Verhältnis: 48dB
Gamma Modifikation: 0,45
Weißabgleich: Auto
Auto Gegenlichtkompensation: Auto
Objektiv: 3,6 mm
Audio: Nein
Eingangsspannung: 9 ~ 12.6V
Elektrischer Strom 80MA
Electronic Shutter: 1/50 (60) ~ 1 / 100,000s
Videoausgang: 1.0VP-P Composite-Video
Der Betrieb Temp .: -20 ~ 50
Größe: 38 * 38mm
Flugzeit: ca. 60min / 100mAh 3S
 
FPV Tx Spec.
Kanal: 8-Ch, AV-Synchronisation
Leistung: 800mW
Eingangsspannung: 12V
Gewicht: 18 g
Größe: 53x45x19mm
Frequenz: 0.9G 0.910G, 0.980G, 1.010G, 1.040G
Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

rcplanetim | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jun 05, 2015

well,, I have had mine now for about 5 days.. I have taken it to 3 different places that are miles apart.. I was had hoped to use this for my homemade rc boat but it wont get 100 feet down the creek until it starts to glitch and twitch..im considering on sending back to hobbyking.. it is totally unusable.. if you buy it you were warned!!!

rcplanetim | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jun 03, 2015

just got mine in two days ago.. put this on my homemade pontoon boat and couldn't get 100 feet away.. I was extremely disappointed!!!! I am going to try again in a different location in a couple days.. IF I get better performance out of it I will let everybody know..
but i have used my 250 mil 5.8 mgz at the same place with no problems for about a mile.
right now mine is on craigslist after owning it for 2 days.. at this point i wish i had never bought it.. and it claims long range...lol

totuma | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jun 12, 2014

It come with inverted connector to camera. check the polarity . It arrived with a bad transmiter, it works only in channel 3

aeroflight | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jan 05, 2013

I just received this kit today and did some testing. Without commenting on range, this kit has a decent camera with great low light performance. The only downside I see is the RF transmitter is quite heavy. Having a look inside the transmitter it actually is a small module but the manufacturer adds aluminum shims and the external case to deal with heat dissipation. Perhaps this can be modified to be lighter. All in all, not bad for the price.

skyfly15 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Dec 14, 2012

There are a couple channel with restriction to fly 900MHZ in USA, do Im right?, if yes some body can let me know which one are those?
Thanks

FPV-Nut | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Aug 07, 2012

I have bought 2 of these,1 a year ago and the second a few weeks ago.The one from a year ago Tx and Rx are great the camera is so-so.I have flown over 4 KM and I'm sure I could go farther.The 1 I bought a few weeks ago isn't the same one as a year ago.Its circuit board layout is different,that is not big problem except it wont fit well with the FPV Fiberglass Pan-Tilt Camera Mount L-Size the connection spot doesn't line up so you will have to used a Dremel like tool to grind material away so you can plug the wires in.Great product but HobbyKing has to redesign the FPV Fiberglass Pan-Tilt Camera Mount L-Size .

DYORD | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2012

Very mad at this product! I have to put 5 crowns just to save this review. When it arrived, it was working flawlessly.. after few days.. can't get anymore signal!

DYORD | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2012

On its first day, it was working flawlessly. I was very happy!! Few days later.. it's working inconsistent. Sometimes I get a signal sometimes I don't. I've already tried cycling the channels of both Vtx & VRx...it just don't work as it should. When I get a signal, I would lose it 5 feet away. Now I'm very mad!!!

peanutdinos3000 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2012

My Tx finally stopped working, I guys since I lightened it up by taking it out of it heavy gold case, it really has to be powered on just before you fly or else it will over heat. My problem was just that, it overheated and the solder inside on the circuit board started to flow. It still worked but I could not change the channel, the display on the tx was fully lit. Took it out yesterday, worked than got noise in the feed and the tx would not power on after that. When it did work fine, I was please with it's overall quality as it was my introductory fpv tx. I'm going to buy another in hopes that I am more careful this time to not let it burn up.

yak54hong | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jul 03, 2012

1st, so disappointed about the short range ( 100m )

2nd, the connection between the ccd module and tx was incorrect.

I should change the connector holder inversely.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Kundendateien
GroPro w/OSD Wiring Download [45]
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!