Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

90mm EDF JET w / Air Retracts (Camo Version) (PNF)

Generating Links

90mm EDF JET w / Air Retracts (Camo Version) (PNF)

Preis:

Now save speichern 0,00 € 0,00 €

252,58 €
Versendet aus:
  • USA
  • Global
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
177000002
Kostenloser Versand? Klicke hier um mehr zu lernen!

Ein sehr großer EDF-Jet, die hervorragende Leistung, große Präsenz bietet sowohl auf dem Luft und auf dem Boden und eine PNF, einen schnellen Build zu sein. Es gibt viel Kraft vom Fass aus der V2 1770kv / 90mm Lüfter-Combo, wenn sie mit einem 6s Lipo verwendet, langsam fliegen Fähigkeit Beeindruckend ist auch mit freundlicher Genehmigung der vorge ausgestattet Klappen, aber das ist nicht das, was diese besonders gut aussehenden Jet ist alles über, hoch Geschwindigkeit und hoher manevoeverability sind der Name des Spiels!

Dieses Modell verfügt über ein ganz sowie ein Ruder und Querruder bewegen Leitwerk, die mit dem Licht fliegenden Gewicht und hohe Schub EDF-Einheit kombiniert, sollte auch die anspruchsvollsten Piloten erfüllen. Air zieht, gute Qualität Servos, eine satte 100A ESC alle zu einem zuverlässigen addieren und einfach mit großen Jets zu leben. Dies ist eine spannende Suche große Größe EDF-Modell, das jeder bei Ihrer nächsten Clubtreffen beeindrucken!

Spezifikation:
Spannweite: 923mm
Länge: 1436mm
Flächenbelastung: 100 g / dm 2
Fluggewicht: 2200g
Channel: 6 - Kanal
Motor: 1770kv 3674 Brushless Inrunner mit Kühlkörper (V2)
ESC: 100A
Servo: 9 x 9 g
EDF: 90mm

Erforderlich:
Ihre eigene 6ch Tx & Rx
Akku 3700mAh 22.2V 6S 25C

Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

abagnalejr123 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 13, 2013

Warning:
The EDF unit that is supplied with the kit is brittle & will shatter in the first 3 minutes of full power use (I'd done some research and was expecting this, so purchased this kit on the understanding that it would need replacing). What I was not prepared for, however, was the sub-standard quality of the retracts and struts. The springs are not strong enough to lock the gear in the down position, hence the nosewheel collapsed on the first landing. ALSO, the struts have been "downgraded" from the ones that are commomnly found on this model. It would seem that in an attempt to save weight, to make the newer air retract units work, the nice "turned aluminium" struts I was expecting, were absent. In their place was a lightweight wire nosewheel strut, and tubular main stuts, with absolutely no spring suspension incorporated whatsoever. Completely unsatisfactory. Because of the lack of suspension, the shock forces are transmitted straight to the retract mounts, which will fail if not strengthened.

abagnalejr123 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 13, 2013

Warning:
The EDF unit that is supplied with the kit is brittle & will shatter in the first 3 minutes of full power use (I'd done some research and was expecting this, so purchased this kit on the understanding that it would need replacing). What I was not prepared for, however, was the sub-standard quality of the retracts and struts. The springs are not strong enough to lock the gear in the down position, hence the nosewheel collapsed on the first landing. ALSO, the struts have been "downgraded" from the ones that are commomnly found on this model. It would seem that in an attempt to save weight, to make the newer air retract units work, the nice "turned aluminium" struts I was expecting, were absent. In their place was a lightweight wire nosewheel strut, and tubular main stuts, with absolutely no spring suspension incorporated whatsoever. Completely unsatisfactory. Because of the lack of suspension, the shock forces are transmitted straight to the retract mounts, which will fail if not strengthened.

guitarPlaya | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2012

Maidened this morning! Excellent! Fast agile nimble. Slats and flap exciting no electronic or mechanical issue truly PNF!

guitarPlaya | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Aug 02, 2012

OK! Got it today. Out of box. Nickle size 3mm deep divit and inside flap hinges Unglued left wing. Easy fixes. Comes. With decent instructions and CG. rugged electric retracts. Will inspect all electronics run voltage and current checks on motor and esc program esc for 3.7 cutoff voltage. Insure all servos center without chatter or buzz.set end points to conservative degrees.. Set dual rate and expo to restrictive values. For leisure maiden. Increase values for sport flying over time. Limit flight to 2mins on 4k 6s 20c turnigy flight pack

| Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 24, 2012

ok plusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplus

Martin74 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 11, 2012

- EDF broke while testing outside the plane due to poor balance of the fan, motor shaft also bend and broke

- Air retracts with air leaks (joints between tube and valve)

- Steering gear need rework its not reliable

- Poor paint finish

- Without instruction manual (cg point ? throws ? )

PeterVau | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jan 19, 2012

18-01-2012 Just got this Camo F-16 and it is an awesome kit and plane! Excellent painting, parts fits - a great design effort to do everything very well. This version now has air retracts, which probably work totally fine, but I will change them out to servoless (HK-312's I think). The nose gear do not use a servo on the leg, but now it is in the body and uses a pull-pull wire system for steering. The tail box blocks and collars do not bind as in earlier versions. The landing gear looks strong, it is sprung (oleo's?). It basically looks like Starmax fixed all the prior version shortfalls. If you are thinking about this plane, stop thinking... BUY it, you will love it.

Tartago | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Dec 29, 2011

Very nice big jet.



I fly mine using a nano 5000 6s, no more than 3min or the battery will puff. the EDF is very hungry.



I changed the mini air retracts with mid size servoless retracts and now it works much better.



I needed to add a BEC because the supplied ESC is opto.

Remember to isolate/cut the red wire coming from the ESC to the Rx. I had issues due to the BEC fighting with the ESC for servo control. I almost throw away the ESC.



Flying is very easy. I even landed with just one elevator half. Better reinforce the elevator plastic bushing that secures it to the fuse. I put a strip of thin ply on top.



For landing keep some speed (20pcnt) and she will land like the real thing.



Remember to give some height to the front LG. Mine was all equal and the plane took 100' to suddenly jump into the air. I gave 1cm more and problem solved.



I installed a lighting system for the looks.

nicola | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Nov 13, 2011

1)Consiglio non mettere i missili sotto le ali per il collaudo 2) carrelli scarsa qualit sostituire 3) spiegazioni del baricentro batteria sbagliata lento e molto pesante in volo 4) non mi sono fidato della ventola l'ho sostituita con quella della freewing. Da qui il mio giudizio negativo

Sean | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Oct 25, 2011

Bought this (the grey one) a few weeks ago & just finished putting it together. Have not got a 6 cell yet so no ESC test but i tested the motor with a 3 cell & worked so a working motor is always good. All servos working.
No instructions on how to fill the air retracts so unsure if they work yet but look strong as its all alloy & metal.
The only real down side to this product that i can see at the moment is the wings & tail fin glue on so when its together then thats it..thats the size it stays.
Taking it for a test flight at local field in 6 days provided lipos arrive.

  1. 1
  2. 2
  3. 3
Kundendateien
Manual Download [2904]
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!

Zubehör