Aerostar RVS 40A Electronic Speed Controller w/Reverse Function 3A BEC (2~4S)

The Aerostar RVS range of brushless speed controllers is designed for fixed-wing aircraft. They feature super smooth start-up, linear throttle response, multiple protection features, and a reverse function designed with seaplanes in mind, but also useful for other applications like Short Take Off & Landing (STOL). Always ensure your motor has stopped before going into reverse.

Although primarily designed for fixed-wing aircraft they do also include a soft start and heli mode making them a good low-cost alternative ESC for your next helicopter project. If you don't need to use the reverse function, simply don't connect the second lead to your receiver and the ESC will operate as a normal one.

Installation is very straightforward as these speed controllers come "plug & play", no soldering is required, they are pre-fitted with an XT60 connector at the battery end and 3.5mm gold connectors for the motor.

Programming can be done either using the transmitter and listening to the tones or you can use the dedicated programming card (see "Related Items").

Features:
• Pre-installed motor and battery connections
• Propeller Brake
• Battery type (NiMH or LiPo)
• Low voltage cut-off
• Adjustable motor timing
• Soft start for gearboxes and helicopters
• Heli mode
• Motor rotation
• Over heating and lost signal protection
• Low voltage cut-off type

Default settings:
• Brake: Off
• Battery type: Lipo (auto cell detect)
• Low voltage cut-off: 3.2V (60%)
• Timing: Automatic
• Start up acceleration: Soft
• Heli mode: Off
• Motor rotation: Forward
• Frequency: 16Hz
• Voltage cut-off: Reduce power

Specs:
Type: Aerostar RVS 40amp electronic speed controller
Input Voltage: 2~4 lipoly cells/5~18 NiMH cells (6~16V)
Continuous Current: 40A
Burst Current: 50A (10secs)
BEC Output: 5V/3A
Programmable: Yes
Battery Connector: XT60
Motor Connectors: 3.5mm bullet
Rx Connector: JR type
Dimensions: 52 x 27 x 11mm
Weight: 36g