Afro ESC 30Amp OPTO Multi-Rotor Motor Speed ​​Controller (SimonK Firmware)

• Overall
• Quality
• Value

Never had one fail

Nov 05, 2016

Many many flights together with this ESC and T-motor 2216 900kv. No sync problem. Flown with both simonk and oneshot 125. Never had a failure. Recomended.

• Overall
• Quality
• Value

Customer Rated

Oct 10, 2016

Best ESC I’ve used.
Works straight out of the packet, no flashing or calibrating wide and smooth range of throttle operation.
Great product HK definitely getting more.

• Overall
• Quality
• Value

Customer Rated

Jul 07, 2016

Great value and well working 30a esc. I had no issues with this, although I did change the firmware from from SimonK to BLHeli. I found that the esc ran the motors much smoother, but still worked fine on both sets of firmware. The esc is fairly wide, so mounting this was a little difficult on a tight frame, especially compared to some of the new esc's on the market but these work great, especially for a larger copter than can accomodate the size.

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 07, 2016

top produkt easy to program with usb linke

• Overall
• Quality
• Value

Customer Rated

May 28, 2016

Bought 4 of them, using for a multirotor.The have NO HEATSINK on it an should handle 30A, as labeled...NEVER!..sorry the will burn down at the max current in a few minute.First i placed a heatsink on them,much,much better.Second thing, they selled as " with Optocoupler"..also NOT, measured the hole pcb, there is a galvanik contact from the input of the PPM-Signal(orange wire) to the controller ..below 1k..this shouldn't be.If you modify it with heatsink it's useable but i will make long duration test( around 15Min.) at 50pcnt power, if it handles, it's okay.Overall a max. of 3Crowns, cause of the missing Heatsink and no optical input.

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 01, 2016

Worked flawlessly, as to be expected of AFRO ESCs.

• Overall
• Quality
• Value

Customer Rated

Mar 23, 2016

Also Bisher kann ich keine auffllikeiten feststellen !!!

Sind sehr gut verarbeitet und machen ordentlich druck :-D

Ganz klare Kaufempfehlung !!!

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 24, 2016

These ESC fit perfectly in my Quanum XJ470 folding chassis. I have found they work very well after proper set up. Also note these do not have a built in BEC so you will need a power control board or if using in a fixed wing plane an external BEC. I own 2 quads with Afro ESC and have had no problems with them.

• Overall
• Quality
• Value

Customer Rated

Oct 27, 2015

Initial impressions of this were good, smaller and lighter than my emax escs and the solder looks top notch. Plugged in, cal'd, and flew, these things don't get anywhere near as warm as my other 25a escs. Maybe because it doesn't have the bec but I am quite pleased. Tested the battery cutoff and it's like they were wirelessly connected because the quad just came down gently.

Note it did not flip and fall and break everything like my other escs would, just sayin.

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 23, 2015

The Best ESC at affordable price.With USB tool for future upgrading firmware.