Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Arkbird Autopilot-Upgrade 2 ~ 6S Stromversorgung 12.6V@1.0A Ausgang

Arkbird Autopilot-Upgrade 2 ~ 6S Stromversorgung 12.6V@1.0A Ausgang

Discontinued Product

Please continue searching for a similar product.
Gewicht:
52 g
SKU:
421000005-0
WANT FREE SHIPPING? Click here to find out more!

Für diejenigen, die ihre FPV Flugzeug und Arkbird Autopilot für den Betrieb mehr als 3S (3 Zellen Lipo) verwendet wird. Arkbird haben dieses Upgrade Stromversorgung für 2 ~ 6S (5.0 ~ 22.2V) Eingang erzeugt. Zuvor Modellierer wurden die Arkbird Autopilot und OSD nutzen möchten, beschränkt auf die Verwendung 3-Zellen-Lipoly Bedeutung, wenn Sie ein 4-Zellen-Setup hatte, musste man Autopilot und OSD aus einer separaten Batterie laufen. Dies wiederum bedeutet, dass Sie nicht den Nutzen der Überwachung der Batteriespannung über die Anzeige auf dem OSD hatte. Mit dem neuen Upgrade-2 ~ 6S Stromversorgung, tun Sie!

Dies ist ein Plug-and-Play-Upgrade / Ersatzgerät für die Arkbird Autopilot und OSD Stromversorgung alle Vorteile der Arkbird geben verfügt über die meisten Setups.

Eigenschaften:
• XT60-Anschlüsse
• Kein Löten erforderlich
• Alle Leitungen enthalten

Specs:
Abmessungen: 29.5x38x57.5mm
Gewicht: 37,5 g
Eingangsspannung: 5.0 ~ 22.2V (2 ~ 6S Lipo)
Ausgangsspannung: 12,6 V
Max Strom: 1.0A

  • Artikelbezeichnung 421000005-0
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht ( g) 52.00
  • Länge 90.00
  • Breite 40.00
  • Höhe 60.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I just received this unit and it works GREAT!!! Thank you Arkbird and hobbyking...my GO DISCOVER wing needs 4s batteries and Arkbird needs 3s...this solved all my worries. Works just perfect!!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just received this unit and it works GREAT!!! Thank you Arkbird and hobbyking...my GO DISCOVER wing needs 4s batteries and Arkbird needs 3s...this solved all my worries. Works just perfect!!!!

The current sense is 100x better than the stock unit and everything is running fine on a single 4s - happy camper so far.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The current sense is 100x better than the stock unit and everything is running fine on a single 4s - happy camper so far.

Mine lasted about 10 minutes. It is a good job it happened on the ground as I am building a long range FPV plane.
I am awaiting a response from HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mine lasted about 10 minutes. It is a good job it happened on the ground as I am building a long range FPV plane.
I am awaiting a response from HK.

It Works but it Shows only 20A Max Even I am pulling 38A so also the mAh measuring is quit inaccurate now.
Would like to know if some others have the same problem?
I am using 4s!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It Works but it Shows only 20A Max Even I am pulling 38A so also the mAh measuring is quit inaccurate now.
Would like to know if some others have the same problem?
I am using 4s!

Works really well! Im using it on my Skyfun, 4S and pulling 60 amps. It saves me some weight powering everything with a single 4S.
And Im not sure the stock would take 60 amps

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works really well! Im using it on my Skyfun, 4S and pulling 60 amps. It saves me some weight powering everything with a single 4S.
And Im not sure the stock would take 60 amps

I can't really say i can properly rate this product yet, as i believe i got a duff unit, after plugin it in to 4s 5000mah and to Autopilot as per diagram in tabs (made by Arkbird ppl themselves), a minute later the upgrade unit went up in smoke, i disconnected the battery quickly and let it coll down for about 5 min, plugged in original 3s unit to test if Autopilot is ok.

Well outcome - Autopilot has now no Voltage output from Vid Out pins so no power to Video TX as tested with volt meter. Might be other problems but cant really say and afraid to find out.

Opened RMA sent both Upgrade unit and Autopilot to UK warehouse for further testing. I just hope i got a duff unit :( So keeping my hopes high as i believe it is worth every penny.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I can't really say i can properly rate this product yet, as i believe i got a duff unit, after plugin it in to 4s 5000mah and to Autopilot as per diagram in tabs (made by Arkbird ppl themselves), a minute later the upgrade unit went up in smoke, i disconnected the battery quickly and let it coll down for about 5 min, plugged in original 3s unit to test if Autopilot is ok.

Well outcome - Autopilot has now no Voltage output from Vid Out pins so no power to Video TX as tested with volt meter. Might be other problems but cant really say and afraid to find out.

Opened RMA sent both Upgrade unit and Autopilot to UK warehouse for further testing. I just hope i got a duff unit :( So keeping my hopes high as i believe it is worth every penny.

Customer files
346738995X777836X23.jpg Download [1190]
arkbird wrongly soldered xt60 Download [1190]
Connection Diagram by rank - rcgroups Download [106]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save