Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Armattan FPV Morphite X155 Rahmen

Generating Links

Armattan FPV Morphite X155 Rahmen

Preis:

Now save speichern 30,32 € 30,32 €

Special Price 28,04 € 28,04 €

You save speichern 30,32 € 30,32 €

Was  58,36 €

Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
771000001-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

Der FPV Morphite ist ein echtes Unibody X Quad aus 3mm Kohlefaser und hat einen Radstand von 155mm. Mit nur 56g ist es extrem leicht, was es zu einem sehr schnellen und agilen Flieger macht. Dieses Quad wird mit einem von Florent entworfenen MRP POD geliefert. Dieser POD wurde speziell für die Unterbringung Ihrer FPV-Kamera und Ihres Videosenders entwickelt. Rücklicht-LEDs sind ebenfalls vorhanden, damit jeder sehen kann, wo Sie gewesen sind.


Es wird empfohlen, 1306~1806-3100+kv-Motoren mit 20A-Reglern und Stromversorgung von einem 3S-LiPo-Akku zu verwenden. Propeller sollten bis zu 4” (4050) CW und CCW sein.


Es sollte stundenlangen Spaß mit dieser Drohne geben, da der Rahmen nahezu unzerbrechlich sein sollte, da er mit einer lebenslangen Herstellergarantie auf die Flugzeugzelle geliefert wird.


Eigenschaften:
• Extrem leicht (56g)
• MRP POD für FPV-Kamera und Video-TX
• 3mm Kohlefaser-Hauptplatte mit lebenslanger Garantie (vom Hersteller)
• Propellergröße bis 4” oder 4045


Spezifikationen:
Radstand: 155mm
Gewicht: 56g (nur Rahmen)
Dicke Hauptplatte: 3mm Kohlefaser
Dicke obere Platte: 2mm Kohlefaser


Inbegriffen:
1 x Armattan X155 Rahmenkit
1 x LED-Platine
1 x Batteriegurt
1 x XT60
1 x Aufkleber


Erforderlich:
1 x Flugcontroller
4 x 20A-Regler
4 x 1306~1806 3100+Kv-Motoren
4 x 4" Propeller
1 x 5V-Regler
1 x 11.1V 3S LiPo-Akku
1 x 5~6 Kanäle TX/RX
1 x FPV-Kamera und Video-TX (und Empfänger / Brille)

Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

razvan | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Small frame

Mar 23, 2018

So just received, first impression very nice is visible that is a good product.
Do not iclude anymore the PDB without 12v and 5v is no sense.
For a clean build i recommend 4in1 esc.
I will com with new updates after flight

povlhp | Verifizierter Käufer

  • Overall
  • Quality
  • Value

OK but not perfect

Nov 10, 2017

Using this frame for a 3" build with a little extra space. 248g without VTX/Cam but with 850mAh, 3S Graphene and DYS 1306-4000KV.
Bought it for the name and warranty.
It is made for 2 PCBs only, and you can't really substitute plastic spacers, as they would break in case of crash. So you need aluminium spacers and longer screws. FPV cage will not fit with my spare screws with slightly higher heads. With included parts I could not fit an RX in the stack with my 20A 4in1 w/ BEC and my F4 FC. So used longer spacers in the middle.
There are holes for pillars to hold a larger FPV tower, so they open up an extra option.
OK as a standard frame, but with the video stack it looks vulnerable. I will make/print a frame to hold my battery and cover the screw heads below. If you use velcro on battery+quad, there is less risk of screw heads damaging battery.

Stéphane | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Sep 11, 2016

TOTALLY USELESS: don't buy this!

Is there an engineer at Armattan? I doubt it... Motors holes are 2.3mm wide, as all serious motors (even in small sizes) have 3mm screws (quite standard). The 4 screws retaining the PDB and FC protrude outside the frame (not sunken heads, cylinders instead) so you can be sure you will damage your battery in case of hard landing. The PDB doesn't contain any BEC (5V and 12V, or AT LEAST 5v), so please buy one separate and try to insert it somewhere in such a small frame. The "FPV Pod" is also a joke, not compatible with ANY standard camera or ANY standard 5.8 GHz TX.

jockstrap | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

May 07, 2016

Awesome little frame...

Built mine with naze32, littlebee 20A, DYS 1806-2700kv, 4in blades, 4S - is a little rocket :)

Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!

Zubehör