Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

ASW28 Elektro-Motorsegler EPA / Kunststoff 2540mm (PNF)

ASW28 Elektro-Motorsegler EPA / Kunststoff 2540mm (PNF)

Discontinued Product

Please continue searching for a similar product.
Gewicht:
2950 g
SKU:
043000010-0
WANT FREE SHIPPING? Click here to find out more!

Die Full-Scale ASW 28 ist ein Standard - Klasse Segelflugzeug mit einem fünfzehn Meter Spannweite von modernen faserverstärkten Composites gebaut. Der Hersteller des ASW-28 ist Alexander Schleicher GmbH & Co. Das "W" zeigt dies ist ein Entwurf, der einflussreichsten und produktivsten deutschen Designer Gerhard Waibel. Die Serienproduktion begann im Jahr 2000.

Wie alle Standard-Klasse Seglern, hat die ASW-28 nicht Klappen oder andere Hochauftriebseinrichtungen. Es hat hohen Winglets, ein Einziehfahrwerk und ein Wasserballastsystem. Die Struktur ist ein komplexer Verbund aus Kohlenstoff, Aramid und Polyethylen mit faserverstärktem Kunststoff. Dies ermöglicht eine leichte Struktur mit der Stärke große Mengen an Wasserballast zu tragen, damit die größtmögliche Auswahl an Flächenbelastung für schwache und starke steigenden schönem Wetter.

Unsere ASW 28 ist ein Sport Modell im Maßstab, die Klappen im Gegensatz zu seinem vollen Umfang Pendant tut integrieren. Es kommt stecken und fliegen so brauchen Sie nur einige Endmontage abgeschlossen ist, installieren Sie den Akku, Empfänger und fliegen. Die Zelle ist eine Mischung aus EPO-Schaum für die Flügel und Schwanz, mit einem blasgeformten Plastikrumpf. Daraus ergibt sich eine glatte Oberfläche, die auch extrem langlebig ist. Groß für die weniger als perfekte Hanglagen. Eine leistungsstarke 4018 850kv Brushless Outrunner Motor Raketen die ASW 28 auf Höhe, dann, wenn Sie drosseln, faltet sich der Propeller für ausgedehnte steigenden zurück. die Batterie ist der Zugriff durch die Baumwipfel mit vier kleinen Schnappverschlüsse leicht, die das Vordach hält sicher.

Eigenschaften:
• Plug-and-Fly - Installieren Sie einfach Ihre eigene Batterie, Sender und Empfänger
• Ultra dauerhaft blasgeformten Plastikrumpf
• EPO-Schaumstoff-Form Flügel und Schwanz
• Alle Servos, einschließlich Klappen werden vorinstalliert
• Einfaches Entfernen Baldachin / Batteriedeckel mit Pilotenfigur
• Leistungsstarke 4018 850kv Brushless-Motor mit Faltpropeller

Specs:
Spannweite: 2540mm
Länge: 1132mm
Fluggewicht: 1050g
Motor: 850 kv Brushless Outrunner Motor
ESC: 30A w / BEC
Servo: 9g x 6

Benötigt:
6-Kanal-Sender und Empfänger
3S 11.1V 1500mAh Lipo Akku
Foam-safe Kleber

  • Artikelbezeichnung 043000010-0
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht ( g) 2950.00
  • Länge 1230.00
  • Breite 150.00
  • Höhe 240.00
  • ASW28 Glider
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Bin sehr ?berrascht wie qualitativ gut das Teil ist. Hatte schon einige "Schaumwaffeln" von HK, dieser ist jedoch der beste den ich je hatte.

Einziges minus bekommt er f?r den Antrieb, entweder gleich mit 4S fliegen oder bei 3S sofort neue 11x6 Propeller drauf... sonst is er sehr schwach.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bin sehr ?berrascht wie qualitativ gut das Teil ist. Hatte schon einige "Schaumwaffeln" von HK, dieser ist jedoch der beste den ich je hatte.

Einziges minus bekommt er f?r den Antrieb, entweder gleich mit 4S fliegen oder bei 3S sofort neue 11x6 Propeller drauf... sonst is er sehr schwach.

There is a hurricane passing through Florida right now, so this review is of aircraft only, not flight.

Pros: I like the plastic fuselage and the ample space for FPV gear. All the parts came, except a few servo horns. I already had extras from other planes

Cons: Everyone says canopy, and I agree. Not only do I wish it were more rigid, but I also with the plastic was clear. I now understand why all the ASW videos have the camera outside the cockpit. It isn't transparent enough. What a shame because with a better canopy this would be a superb FPV platform. As it stands now, I would call it good.

Mods: I added a divider between the battery tray and the motor, so that in a crash the battery doesn't fly into the motor's shaft. I had a part from a broken Sky Eye that fit nearly perfectly. I also removed the wooden battery tray dividers so that I have more control over CG without adding weight. I also added a balsa sheet aft to extend the battery tray, so I had a good place for my flight controller.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

There is a hurricane passing through Florida right now, so this review is of aircraft only, not flight.

Pros: I like the plastic fuselage and the ample space for FPV gear. All the parts came, except a few servo horns. I already had extras from other planes

Cons: Everyone says canopy, and I agree. Not only do I wish it were more rigid, but I also with the plastic was clear. I now understand why all the ASW videos have the camera outside the cockpit. It isn't transparent enough. What a shame because with a better canopy this would be a superb FPV platform. As it stands now, I would call it good.

Mods: I added a divider between the battery tray and the motor, so that in a crash the battery doesn't fly into the motor's shaft. I had a part from a broken Sky Eye that fit nearly perfectly. I also removed the wooden battery tray dividers so that I have more control over CG without adding weight. I also added a balsa sheet aft to extend the battery tray, so I had a good place for my flight controller.

Hello
A super model, I was surprised to see that the body is plastic, the finish is perfect
For balancing it will put the receiver far back of the fuselage and voila
The CG is good.

Bonjour

Un super model, j’ai été surpris de vois que le fuselage est en plastique, la finition est parfaite
Pour l’équilibrage il faudra mettre le récepteur loin en arrière du fuselage et le tour est joué
Le CG est bon

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hello
A super model, I was surprised to see that the body is plastic, the finish is perfect
For balancing it will put the receiver far back of the fuselage and voila
The CG is good.

Bonjour

Un super model, j’ai été surpris de vois que le fuselage est en plastique, la finition est parfaite
Pour l’équilibrage il faudra mettre le récepteur loin en arrière du fuselage et le tour est joué
Le CG est bon

Quality is not that good. The canopy broke the first time i took it off, and the connection between the wings has a lot to wish for. But for the price i guess i can't complain.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quality is not that good. The canopy broke the first time i took it off, and the connection between the wings has a lot to wish for. But for the price i guess i can't complain.

Magnifique planeur pour le prix. 1ers vols le 24/07/2016. Peut être lancé sans courir.

J'avais mis du différentiel d'aileron (bras de servos ailerons inclinés de 30° vers l'avant) pour éviter du lacet inverse -> OK. Expo à 35 pcnt. Monte sans aucun problème. Plane très bien. Assez rapide vu la finesse. UN EXCELLENT ACHAT !!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Magnifique planeur pour le prix. 1ers vols le 24/07/2016. Peut être lancé sans courir.

J'avais mis du différentiel d'aileron (bras de servos ailerons inclinés de 30° vers l'avant) pour éviter du lacet inverse -> OK. Expo à 35 pcnt. Monte sans aucun problème. Plane très bien. Assez rapide vu la finesse. UN EXCELLENT ACHAT !!!

夏だグライダーだ
このEPスケール ASW28良く飛びます。
ピュアグライダーでないのが残念ですが2m超えのスパンは、はるか上空の大きな上昇気流を捕まえてゆったり飛んでくれます。今日は曇りがちで残念でしたがそんな時はモーターラン。ラダーを積極的に使うと思いの他くるくる小回りも利きます。
https://youtu.be/Dhyg82qMy_I

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

夏だグライダーだ
このEPスケール ASW28良く飛びます。
ピュアグライダーでないのが残念ですが2m超えのスパンは、はるか上空の大きな上昇気流を捕まえてゆったり飛んでくれます。今日は曇りがちで残念でしたがそんな時はモーターラン。ラダーを積極的に使うと思いの他くるくる小回りも利きます。
https://youtu.be/Dhyg82qMy_I

Very easy to assemble. It flies and thermals well. The only downside it the lack of parts. The canopy mounting needs improvement, thus the 4 crowns, but still a great value.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very easy to assemble. It flies and thermals well. The only downside it the lack of parts. The canopy mounting needs improvement, thus the 4 crowns, but still a great value.

Came in perfect packing. No damage, no wrong or missing parts. Easy to built up.

I will change the servos on elevator and ailerons before maiden for better ones. Not that are not working but my faith on them is equal to zero. For the rudder and the flaps I will leave them in and see, what they do. Also the ESC is one that I do not trust on, and so I change it for a YEP 40A before meiden. That is surely not necessary but I want to be on the safe side when powering it with 4S and hope the motor will stand that number of cells. All in all you get a beautyfull plane for a really good price. Will come back with more info after ( hopefully soon ) maiden.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Came in perfect packing. No damage, no wrong or missing parts. Easy to built up.

I will change the servos on elevator and ailerons before maiden for better ones. Not that are not working but my faith on them is equal to zero. For the rudder and the flaps I will leave them in and see, what they do. Also the ESC is one that I do not trust on, and so I change it for a YEP 40A before meiden. That is surely not necessary but I want to be on the safe side when powering it with 4S and hope the motor will stand that number of cells. All in all you get a beautyfull plane for a really good price. Will come back with more info after ( hopefully soon ) maiden.

For the value this glider is very good, it came very well packed, everything pre-installed. You would need about 3 hours to equip it and fine tune the installation (Personally I modified Flap / Aileron cables and connector to ease wing assembly)
Regarding the sailplane performance it's flying fast and is not beginner's glider it could be compared to Proxima from Reichard with the difference of material used of course!
I strongly recommand this model!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For the value this glider is very good, it came very well packed, everything pre-installed. You would need about 3 hours to equip it and fine tune the installation (Personally I modified Flap / Aileron cables and connector to ease wing assembly)
Regarding the sailplane performance it's flying fast and is not beginner's glider it could be compared to Proxima from Reichard with the difference of material used of course!
I strongly recommand this model!

I have to say that this plane Flys really well and the quality is great only issue with mines was the wings do not fit in place tightly so I used some tape to stiffin up the gap areas. Motor and esc both work fine. The servos are great too I highly recommend this plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have to say that this plane Flys really well and the quality is great only issue with mines was the wings do not fit in place tightly so I used some tape to stiffin up the gap areas. Motor and esc both work fine. The servos are great too I highly recommend this plane.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 9
Customer files
Compatible manual for ESC Download [197]
No File Name Download [3371]
Esc Manual Download [197]
New battery position - under CG Download [352]
Battery_And_RX_place_1.jpg Download [342]
New battery place - under CG Download [331]
Off the slope 2 Download [17]
Off the slope Download [29]
Moon pic Download [16]
No File Name Download [18]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save