Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

B-17G Freiheits-Schönheit EPO 1875mm (PNF)

B-17G Freiheits-Schönheit EPO 1875mm (PNF)

Discontinued Product

Please continue searching for a similar product.
SKU:
310000112
WANT FREE SHIPPING? Click here to find out more!

Diese B-17G wurde vom Luftfahrt-Enthusiasten Don Brooks gekauft, die die Liberty Foundation bildeten die Ebene wie der Liberty Belle auszustellen. Restaurierung begann 1992 mit Teilen aus einem anderen beschädigt B-17 (44-85813), gespielt von Tom Reilly und Unternehmen / Flying Tigers Warbird Restoration Museum (auch bekannt als "Bombertown USA"), befindet sich in dieser Zeit in Kissimmee Gateway-Feld, Kissimmee, Florida . Sie kehrte in die Luft am 8. Dezember 2004 und hatte seitdem die Luft Show Schaltung getourt.

Leider sie am Morgen des 13., 2011, June verloren wurde gemacht Freiheits-Schönheit eine Notlandung in Oswego, Illinois, nachdem sie von Aurora Municipal Airport in Sugar Grove, Illinois auszuziehen. Kurz nach dem Start teilte der Pilot eines T-6 Texan chase Flugzeug Freiheits-Schönheit des Piloten, die die B-17 nach innen gerichtet linken Flügel auf Feuer war und empfahl eine sofortige Landung. Der Bomber landete erfolgreich in einem nahe gelegenen Feld und die sieben Menschen an Bord waren in der Lage, ohne Schaden zu evakuieren, aber wegen der schlammigen Boden konnten die Feuerwehrfahrzeuge nicht erreichen ......

Diese riesige Plug-and-Fliegen-B-17 ist eine Hommage an Liberty Belle. Sehr einfach und schnell zu montieren, mit allen Servos & WSA vorinstalliert. Es ist aus EPO-Schaum, so ist es schwer, wie Sie würde exepect und wie die 1pc Flügel entfernbar ist, ist es auch praktisch. Die vormontierten Elektro zieht sich zurück und Räder sind groß genug, um fast jede Oberfläche in Angriff zu nehmen und mit viel Kraft auf Hahn von den vier Brushless-Motoren Spinnen gegenläufig rotierenden Requisiten, glatt ausziehen die sind ein Kinderspiel, werden die vormontierten geteilten Klappen sicherzustellen, dass Anlandungen auch Drama frei sind.

Es gibt viel Skala Detail zu bieten, einschließlich der guns & Kugelturm, die Pratt & Whittney "Motoren", drei Messer Skala Requisiten, Arbeits Navigation und Landelichter und so weiter. Wir geflogen haben dieses B-17 weitgehend, es ist leicht zu fliegen und so anmutig, eine Skala Flyer träumen, hat dieses Modell realen Präsenz in der Luft und ist verpflichtet, ein Stern an Ihrem Flugplatz zu werden!

Specs:
Spannweite: 1875mm
Länge: 1350 mm
Fluggewicht: 2750g
Motor: 4 x 700kv Brushless Outrunner Motor
Esc: 4 x 20A ESC
Servos: 6 x 9g Servo
Fahrwerk: Elektrische Einziehfahrwerk

Eingeschlossen sind:
Alle y-Leitungen
Kleben
Anleitung
2 Ersatzpropeller
Parallel Leads für ESC / Lipo

Benötigt:
7-Kanal-Sender und -Empfänger
2 x 3S 11.1V 2200mAh ~ 3000mAh Lipo Akku

  • Artikelbezeichnung 310000112
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 5305.0000
  • Länge 1360.00
  • Breite 260.00
  • Höhe 480.00
  • B-17G Liberty Belle
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

awsom plane,at the ground or in the air no matter,looks and fly great,,some built time but all i all no problem,,love it

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

awsom plane,at the ground or in the air no matter,looks and fly great,,some built time but all i all no problem,,love it

Ordered thru the Australian warehouse it arrived in good condition. Its an easy assembly and does not take very long. Taking advice from other reviews I ordered a full set of Master Airscrews at the same time. I fitted the standard blades & the very first time I ran the motors up one prop exploded from the hub damaging the engine cowling of the next engine.
My advice, DO NOT USE STANDARD PROPS. immediately replace with a full set of master props. Bear in mind there are absolutely no spare parts available for this plane except the crappy and potentially dangerous standard props. The total lack of spares will eventually be the undoing of what is actually a great aeroplane. One change I made when assembling was to mount the receiver fully connected then velcroed to the centre of the wing. I then cut out a large rectangular opening in the fuse where the wing sits to accommodate the receiver and wiring. This means I only have to connect two plugs to the receiver, elevator and rudder and feed the two battery leads into the cockpit area where the batteries live. Makes fitting the wings a two minute job and keeps all the wiring really neat and all on the wing, simple. To fit the replacement props I used TWO nuts tightened on the motor shaft. The prop goes on next with a third nut to tighten the prop on the first two nuts to locate it. The nuts form a tight fit into the pr

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ordered thru the Australian warehouse it arrived in good condition. Its an easy assembly and does not take very long. Taking advice from other reviews I ordered a full set of Master Airscrews at the same time. I fitted the standard blades & the very first time I ran the motors up one prop exploded from the hub damaging the engine cowling of the next engine.
My advice, DO NOT USE STANDARD PROPS. immediately replace with a full set of master props. Bear in mind there are absolutely no spare parts available for this plane except the crappy and potentially dangerous standard props. The total lack of spares will eventually be the undoing of what is actually a great aeroplane. One change I made when assembling was to mount the receiver fully connected then velcroed to the centre of the wing. I then cut out a large rectangular opening in the fuse where the wing sits to accommodate the receiver and wiring. This means I only have to connect two plugs to the receiver, elevator and rudder and feed the two battery leads into the cockpit area where the batteries live. Makes fitting the wings a two minute job and keeps all the wiring really neat and all on the wing, simple. To fit the replacement props I used TWO nuts tightened on the motor shaft. The prop goes on next with a third nut to tighten the prop on the first two nuts to locate it. The nuts form a tight fit into the pr

Received my Liberty Belle yesterday and assembled the basic airframe last night. Plane looks great and the finish is very nice. This thing is very big.... Will have to see how I get it to the field and back :-).

Quality of the parts look very good to me, off course I haven't flown it yet, but it looks and feels very good. Retracts work good to and look very sturdy. I'm planning on fitting them somewhat deeper in the nacelle (for looks), but for now this will do. During testing however one of the two was acting somewhat strange, but after a few tries it started functioning normally (it reversed once - after remainig in when I activated the retracts it came out when I retracted the other one after that it refused to work - I powercycled and the quirk disappeared). Motors look exactly the same as the motor for the Arttech spitfire, ESCs have 3A UBECs (that's what it says on the labels). During my testing the ESC became somewhat hot when there was no motor connected, so only powering the BEC and the retracts - maybe the retracts use a lot of juice and is that an explanation for the strange behavior.

All in all I think this is a great plane for a very nice price point. I'm going to spend some time to check everything and make it to my liking, but that's the point of the hobby.

My biggest minus for now is the main wing, it has no reinforcement whatsoever. Also no cavities for rein

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received my Liberty Belle yesterday and assembled the basic airframe last night. Plane looks great and the finish is very nice. This thing is very big.... Will have to see how I get it to the field and back :-).

Quality of the parts look very good to me, off course I haven't flown it yet, but it looks and feels very good. Retracts work good to and look very sturdy. I'm planning on fitting them somewhat deeper in the nacelle (for looks), but for now this will do. During testing however one of the two was acting somewhat strange, but after a few tries it started functioning normally (it reversed once - after remainig in when I activated the retracts it came out when I retracted the other one after that it refused to work - I powercycled and the quirk disappeared). Motors look exactly the same as the motor for the Arttech spitfire, ESCs have 3A UBECs (that's what it says on the labels). During my testing the ESC became somewhat hot when there was no motor connected, so only powering the BEC and the retracts - maybe the retracts use a lot of juice and is that an explanation for the strange behavior.

All in all I think this is a great plane for a very nice price point. I'm going to spend some time to check everything and make it to my liking, but that's the point of the hobby.

My biggest minus for now is the main wing, it has no reinforcement whatsoever. Also no cavities for rein

The model looks impressive on the ground, has great presence in the air and is very realistic in flight. Plenty of power available, great sound from four props.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The model looks impressive on the ground, has great presence in the air and is very realistic in flight. Plenty of power available, great sound from four props.

I just got it in was less than 2 weeks and hell yea im excited about getting it in the air, ! question tho, is there a way to get the landing lights to STOP flashing and just stay on ?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just got it in was less than 2 weeks and hell yea im excited about getting it in the air, ! question tho, is there a way to get the landing lights to STOP flashing and just stay on ?

Just completed 5th flight and I am loving this plane. It took a day to assemble as I checked every part to ensure proper functionality. After reading other reviews I didn't try to use the stock props and used MAS props with parkzone spinners from the start. Looks just as great in the air as it does on the ground. Flies like a dream and is very easy to land. I am using 2 Turnigy nano-tech 2200mah 3S 25~50C Lipo Packs and get about 5 minuets flying time with 30 pcnt charge left and found you only need 1/2 throttle for a good scale flight. Excellent plane HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just completed 5th flight and I am loving this plane. It took a day to assemble as I checked every part to ensure proper functionality. After reading other reviews I didn't try to use the stock props and used MAS props with parkzone spinners from the start. Looks just as great in the air as it does on the ground. Flies like a dream and is very easy to land. I am using 2 Turnigy nano-tech 2200mah 3S 25~50C Lipo Packs and get about 5 minuets flying time with 30 pcnt charge left and found you only need 1/2 throttle for a good scale flight. Excellent plane HK.

there are no "Live Chat" services. And my request is over 4 days old. Come on people how about some customer service.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

there are no "Live Chat" services. And my request is over 4 days old. Come on people how about some customer service.

When I received this aircraft it look great in the box with everything taped down. I managed to find a couple of lipos I also ordered buried in the box. Everything looked fine so the box was put away until my birthday, July 4, Really

Easy to put together. Instructions were fine. Plane looks great except there was no ball turret or guns in the box!!!! It seems when they put in the batteries they took out the ball turret and guns.

I have requested the parts two days ago and my request has not been assigned yet in their 24X7 support.

I expect them to send the parts without and issue. We will seen. Until then the maiden flight is on hold.

If they give good services on this issue I will increase my rating, but since they have not assigned the problem yet I am concerned.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

When I received this aircraft it look great in the box with everything taped down. I managed to find a couple of lipos I also ordered buried in the box. Everything looked fine so the box was put away until my birthday, July 4, Really

Easy to put together. Instructions were fine. Plane looks great except there was no ball turret or guns in the box!!!! It seems when they put in the batteries they took out the ball turret and guns.

I have requested the parts two days ago and my request has not been assigned yet in their 24X7 support.

I expect them to send the parts without and issue. We will seen. Until then the maiden flight is on hold.

If they give good services on this issue I will increase my rating, but since they have not assigned the problem yet I am concerned.

I received my B-17 from USA warehouse in great condition. This plane is big. I also ordered replacement Master Airscrew 9X6X3 for imporved prop performance over 1/2 throttle.
So far things look good. I am creating space in my workshop to build. I would like to add pilots if possible.
I will update as the build / flights progress.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I received my B-17 from USA warehouse in great condition. This plane is big. I also ordered replacement Master Airscrew 9X6X3 for imporved prop performance over 1/2 throttle.
So far things look good. I am creating space in my workshop to build. I would like to add pilots if possible.
I will update as the build / flights progress.

Maidened mine today with no problems. Needed no trim whatsoever and flies beautifully. Running MAS 9x7x3 props on 2 x 3S 2200. Got tops of 5 min flights. Will maybe try 4S 4000 next time. Had 3 more enjoyable sorties and very, very happy.Landings are a breeze and I found flaps not required at all.Looks great, flies great.Happy days.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Maidened mine today with no problems. Needed no trim whatsoever and flies beautifully. Running MAS 9x7x3 props on 2 x 3S 2200. Got tops of 5 min flights. Will maybe try 4S 4000 next time. Had 3 more enjoyable sorties and very, very happy.Landings are a breeze and I found flaps not required at all.Looks great, flies great.Happy days.

  1. 1
  2. 2
Customer files
No File Name Download [89]
No File Name Download [89]
No File Name Download [93]
No File Name Download [89]
No File Name Download [89]
No File Name Download [93]
No File Name Download [93]
No File Name Download [90]
Battery/Receiver Install. Download [2110]
No File Name Download [3340]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save