Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Big Scale Brushless-Plug - & - Fly Mosquito w / Einziehfahrwerk

Generating Links

Big Scale Brushless-Plug - & - Fly Mosquito w / Einziehfahrwerk

Preis:

Now save speichern 0,00 € 0,00 €

190,41 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
Mosquito-RRTF
Kostenloser Versand? Klicke hier um mehr zu lernen!
Dieses WWII Havilland DH.98 Mosquito ist in großem Maßstab! Es kommt mit Einziehfahrwerk und wird von EPO. Was will man mehr ?! Eine sehr detaillierte Groß EPO Brushless Mosquito mit Dual - Skala wie zieht sich zurück , die sich langsam mit ihren eigenen Türen öffnen. Die Mosquito hat viel Kraft dank seiner Doppel 30A Brushless Outrunner Motoren. Das hohe Maß an Detail in Motorhaube, Baldachin, Cockpit und Frontmaschinengewehre geben diese Warbird ausgezeichnete Realismus. Contructed von Crash elastischen EPO - Schaum die Mosquito kommt 97% fertig aufgebaut und enthält leistungsstarke Doppel 40 Größe Brushless outrunners und 30A (60A Gesamt) WSR. Auch alle Servos sind bereits vorinstalliert und alle Steuerflächen werden durch insgesamt 10 (9g) Servos, einschließlich Aileron, Ruder, zieht sich zurück und einfahren Buchttüren gesteuert. Es hat sich auch Funktions - LED Navigationslichter vorinstalliert.

Spec.
Spannweite: 1355mm
Länge: 950 mm
Fluggewicht: 1700g
Servo: 10x9g
Motor: 2 x 40-XX Brushless Outrunner
ESC: 2x30A
Prop: 2 X 3 - Blatt (plus zwei Ersatz)
Batterie erfordert: 3S 2200mAh 20 ~ 30C
Erforderlich:
Ihre eigene TX & RX
11.1V 2200mah 3S 30C Lipo
  • Big Scale Brushless Plug-&-Fly Mosquito w/Retract System
Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

grant | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jan 02, 2013

I just bought a mosquito and its awesome I change the props as was said by other buyers and the 4cell battery is a must it gives you plenty more power and battery time . Do your self a favour and get one.

rcpilot250 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Oct 14, 2012

I am generally pleased with this model. Always worshipped the Mossy as the ultimate in WW2 engineering and innovation as well as admiring its beautiful lines. I put lots of weight in the nose, including a disused 9v battery. With the recommended battery (11.1 li-po) it got off the ground and needed all my attention to keep it flying while I trimmed it. Acting on a suggestion, I used a 4 cell battery and got a considerable increase in performance. Time now to act on another tip, and increase the pitch of the props to see what that will do. Criticisms? Undercarriage is too delicate for any except the best pilots and flattest surfaces. I have straightened the wire legs several times, and now have glued back together one of the rotating parts of the servo. If HK carried spares, or upgrades it would be good. Also clear specs for replacement of motors/ESCs would be useful. As I am so much in love with the Mossy and a WW2 child, I really want to enjoy this one and keep it flying.

xuanphu | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Oct 09, 2012

This thing is like a tank. I had 3 big crashes with it (one from 6-10 meters high) and nothing broke apart the scale guns in the nose.

Only problem is that one motor shaft is now bent.
Is there a motor on HK site I can use for replacement?

steven duncan | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Sep 13, 2012

This is a very well put together plane. I've had the B-17 which has an almost identical wing joining design and the same type of foam but this far exceeds that model. All the parts fit together beautifully. The finish is really nice and it is amazingly quiet. The motors will sit barely spinning at idle which looks really scale and it sounds like a little turbo prop. Can't wait to fly it but with no flaps and tapered tips it will probably need to be flown to the ground with experience under your belt. I'll be watching out for a tip stall turning onto final.

fanny | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Sep 04, 2012

Expect big troubles. The mods you need to do will double the price and then the undercart is no match for the stall speed. Shame as i was looking forward to this.

camaro | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jul 27, 2012

Magnifique avions.
Dommage, la seul chose qui me retiens de lacheter cest que hobbyKing ne vend pas de pices de rechange.

Sean | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jun 27, 2012

This plane was a pain when I first got it as I tried to takeoff from the ground but it does not like grass too much & after a few prop strikes a motor & esc died.
I only do hand launch & land in long grass next to the runway.
I run 4s 3300 25c with master airscrew 11x8 3 blade props for around 6min flight.
there is a weight glued inside the nose (get too it through battery area) that must be removed to run 4s 3300 so the weight is ok.
Elevator is bowed downwards but its flexes back to straight during flight & is no issue.
This plane went from my "what am i gonna do with this" to the 1st plane I fly when I get to the field so I can get the confidence goin for the day to fly my bigger planes.
Rudder servo died & couldnt be bothered to replace it so just taped the rudder in place & it still flies great.

mccannata | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

May 28, 2012

I received my Mosquito last May. After my second flight the left speed control went up in smoke. HK has not been able to supply the replacement speed control, claiming that they are waiting for the manufacture to do so. After almost a year later HK gave me a credit to offset the purchase of two HK 30 amp speed controls. The problem is I've tested that speed control and have found that it produces about 20 percent less rpm's than the one's that came with the Mosquito. To say the least HK needs provide better service.

chardesa | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 05, 2012

It is very easy to install working split flaps on this model to make it a lot more fun to fly and to land. You will need two(2) 9g servos, one in reverse and the following micro hardware; 2 clevis, 2 control horns, 2 3/4" pin hinges, 2- 1mm wire control rods with threaded ends and 2 E/Z connectors. Tools needed; Foan safe CA glue, sharp knife, hinge tape, exacto micro saw balde.

The out line for the flaps are already marked on the wing, so it is simple to follow these lines to cut out the flaps. Because there is very little weight added to the plane the balance is not affected.

If you wish to see pictures of my plane completed follow me on Face Book. cssylvia@msn.com

chardesa | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 02, 2012

I received my Mossy DH 98 today and had it all together in a few hours, easy build. I was disapointed that it did not have flaps and I will make a mode to the plane later and add the split flaps using one 9g servo on each side. My plane balanced well with the 3S lipo but I think I will switch to the 4S for the first flight. I changed out the props for MAS 9 x 7 and will switch to 10 x 3 when they come in and maintaining the one tractor and one pusher. It looks like it will be a while before I can fly it since we just had 6" of snow today.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 9
Kundendateien
Mosquito Manual Download [3834]
No File Name Download [373]
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!

Zubehör