Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Big Scale J3 Cub EPS 1500mm (ARF)

Big Scale J3 Cub EPS 1500mm (ARF)

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
BIG-J3-EPS
WANT FREE SHIPPING? Click here to find out more!

Wie das Sprichwort sagt, sind je größer sie ist, desto besser sie fliegen, so dass diese leicht, aber große Cub ideal für Trainee-Club Piloten oder für die Suche nach einem Cub einfach nur ein wenig größer als die normalen Schaummodelle.

Dieses Modell ist schön fertig, mit Klappsteuerflächen, eine solide Unterwagen eingerichtet, Schicht U / C & Motorhalterungen sowie Batteriefach. Voll Montagekit, Schraubendreher und sogar Epoxid-Kleber enthalten sind.

Spezifikation:
Material: EPS / Ply
Spannweite: 1500mm
Länge: 1150 mm
Trockengewicht: 860g
Motor: 35-36 Klasse (nicht im Lieferumfang enthalten)
4-Kanal, 4 x Park Größe Servo (nicht im Lieferumfang enthalten)

Erforderlich:
Ihre eigenen 4-Kanal-Sender und Empfänger
35-36 Brushless Motor
30A ~ 40A ESC
2200mAh 3S1P 20C Lipo-Pack
4 x 19g "Park" Größe Servos

  • Artikelbezeichnung BIG-J3-EPS
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 2620.0000
  • Länge 970.00
  • Breite 200.00
  • Höhe 270.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I purchased two of these. I am very pleased with the overall quality of this product. I got exceptional value for the price that I paid. Shipping to Utah, USA add 1? more for the price of shipping. It takes about three weeks for the item to arrive. I gave it four crowns for quality because there are no instructions with the kit. However I didn't have any problem with the assembly. There isn't any Center of Gravity specified. See my post under discussions on this subject.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased two of these. I am very pleased with the overall quality of this product. I got exceptional value for the price that I paid. Shipping to Utah, USA add 1? more for the price of shipping. It takes about three weeks for the item to arrive. I gave it four crowns for quality because there are no instructions with the kit. However I didn't have any problem with the assembly. There isn't any Center of Gravity specified. See my post under discussions on this subject.

Good plane at all! 1. Foam is very resistant and smooth. 2. Build takes almost no time. 3. You have to order bigger wheels, the aixles have only 19mm space for bigger wheels. 4. I use 4 digital metal gear servos HK15148B for safety, they fit perfectly. 5. The pushrods for rudder & elevator were too long. 6. You have to bend the rear wheel wire to fit under the clevis for the rudder to make the wheel steerable. 7. No instructions included. 8. CG at wingspar. 9. A 3542 1500kv fits nicely under the cowl using the original motor-mount. Conclusion: Good plane for intermediate builders.Flying is easy even for beginners

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good plane at all! 1. Foam is very resistant and smooth. 2. Build takes almost no time. 3. You have to order bigger wheels, the aixles have only 19mm space for bigger wheels. 4. I use 4 digital metal gear servos HK15148B for safety, they fit perfectly. 5. The pushrods for rudder & elevator were too long. 6. You have to bend the rear wheel wire to fit under the clevis for the rudder to make the wheel steerable. 7. No instructions included. 8. CG at wingspar. 9. A 3542 1500kv fits nicely under the cowl using the original motor-mount. Conclusion: Good plane for intermediate builders.Flying is easy even for beginners

There are a few problems with this model. The Wings are held on by long bolts that thread into hidden inaccessible captive nuts that are trying to grip foam, so you can imagine what happens when you tighten them.
To get at the battery you have to take off the wings, which means not only undoing the 4 wing bolts but, also those on the struts, and then disconnect the aileron servo leads. Servo extender leads are needed on every connection. The wheels are too small for a cub in my opinion. It does not have the usual cub suspension on the undercarriage. Rudder and aileron servos must be the larger mini types: micros won't fit. Otherwise it goes together well. I have not flown it yet. More later.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

There are a few problems with this model. The Wings are held on by long bolts that thread into hidden inaccessible captive nuts that are trying to grip foam, so you can imagine what happens when you tighten them.
To get at the battery you have to take off the wings, which means not only undoing the 4 wing bolts but, also those on the struts, and then disconnect the aileron servo leads. Servo extender leads are needed on every connection. The wheels are too small for a cub in my opinion. It does not have the usual cub suspension on the undercarriage. Rudder and aileron servos must be the larger mini types: micros won't fit. Otherwise it goes together well. I have not flown it yet. More later.

Really big plane, need weight in the nose, not easy battery access ( not big enough) will not advise to beginner quiet hard to fly specially with strong wind, beside this: the landing gear is perfect did not need to change anything at it's say in discussion, the look is amazing it look so great, not look like EPO plane, the sharp yellow help a lot during flight, this plane is a beauty. Thank's HK

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really big plane, need weight in the nose, not easy battery access ( not big enough) will not advise to beginner quiet hard to fly specially with strong wind, beside this: the landing gear is perfect did not need to change anything at it's say in discussion, the look is amazing it look so great, not look like EPO plane, the sharp yellow help a lot during flight, this plane is a beauty. Thank's HK

Great model for the price. A lot of airplane. Easy assembly. Just needs different wheels like Du-Bros low bounce treaded wheels part number 250T

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great model for the price. A lot of airplane. Easy assembly. Just needs different wheels like Du-Bros low bounce treaded wheels part number 250T

Not sure WHO Gave it 5 stars, I will give it 1 Very Poor QA at plant and piss poor warrenty

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not sure WHO Gave it 5 stars, I will give it 1 Very Poor QA at plant and piss poor warrenty

My is just arrived. Pack in a single box, in perfect conditions.
The paint is poor in detales.
All works perfect. Construction perfect. Lets see flying.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My is just arrived. Pack in a single box, in perfect conditions.
The paint is poor in detales.
All works perfect. Construction perfect. Lets see flying.

The plywood motor mount was assembled crooked, should have returned it but after waiting NEARLY A MONTH FOR SHIPPING I fixed it myself. The wheels as mentioned look terrible, and break easy to boot. NO INSTRUCTIONS...at all. You can set it up with the COG's suggested and may have more luck than I did. The plywood and foam sounds like a good idea but reacts quite differently when subjected to any kind of shock...left with a foam hull filled with rattling shattered plywood. Maybe I got a lemon (perhaps something else besides the motor mount that I missed) but this plane never would really fly. Acted very tail heavy regardless of weight added, and yes the power system was sized right. I love cubs and have had nothing but success with other models, this one...I wish I could do over.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The plywood motor mount was assembled crooked, should have returned it but after waiting NEARLY A MONTH FOR SHIPPING I fixed it myself. The wheels as mentioned look terrible, and break easy to boot. NO INSTRUCTIONS...at all. You can set it up with the COG's suggested and may have more luck than I did. The plywood and foam sounds like a good idea but reacts quite differently when subjected to any kind of shock...left with a foam hull filled with rattling shattered plywood. Maybe I got a lemon (perhaps something else besides the motor mount that I missed) but this plane never would really fly. Acted very tail heavy regardless of weight added, and yes the power system was sized right. I love cubs and have had nothing but success with other models, this one...I wish I could do over.

Good value, but the wheels on the photo look REDICULOUS , please Hobbyking get your supplier to fit something better.

The photo's do not show wether it is EPO foam or balsa /ply, I believe that it is FOAM, which for me is great.

The Cub is available from many, many sites, so if Hobby king is to maintain its sales leadership, get the wheels fixed. I will then buy one.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good value, but the wheels on the photo look REDICULOUS , please Hobbyking get your supplier to fit something better.

The photo's do not show wether it is EPO foam or balsa /ply, I believe that it is FOAM, which for me is great.

The Cub is available from many, many sites, so if Hobby king is to maintain its sales leadership, get the wheels fixed. I will then buy one.

I purchased two of these. I am very pleased with the overall quality of this product. I got exceptional value for the price that I paid. Shipping to Utah, USA add 1&#x2F3 more for the price of shipping. It takes about three weeks for the item to arrive. I gave it four crowns for quality because there are no instructions with the kit. However I didn't have any problem with the assembly. There isn't any Center of Gravity specified. See my post under discussions on this subject.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased two of these. I am very pleased with the overall quality of this product. I got exceptional value for the price that I paid. Shipping to Utah, USA add 1&#x2F3 more for the price of shipping. It takes about three weeks for the item to arrive. I gave it four crowns for quality because there are no instructions with the kit. However I didn't have any problem with the assembly. There isn't any Center of Gravity specified. See my post under discussions on this subject.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save