Neue Produkte Neuigkeiten Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

BMS-2514 Coreless Digital-Alloy Gear Servo - 33.2kg / 0.13s / 7,4V (High Voltage)

BMS-2514 Coreless Digital-Alloy Gear Servo - 33.2kg / 0.13s / 7,4V (High Voltage)

Discontinued Product

Please continue searching for a similar product.
SKU:
BMS-2514
WANT FREE SHIPPING? Click here to find out more!

Die BMS-2514 ist ein High Voltage (7,4V) Coreless Digital Servo mit Titan Zahnräder und eine Alu Kühlkörper Fall. Die BMS-2514 verfügt über einen Hochleistungs-Servohornsatz.

Spezifikation:
Gewicht: 69 g
Maße: 40,5 x 20 x 39 mm
Drehmoment @ 6V: 27,1 kg / cm
Drehmoment @ 7.4V: 33,2 kg / cm
Geschwindigkeit @ 6V: 0.16sec / 60 ° bei keiner Last
Geschwindigkeit @ 7.4V: 0.13sec / 60 ° bei keiner Last

Eigenschaften:
Alu-Kühlkörper-Fall
Titanium Getriebe
Coreless Motor
digital Servo
Doppelkugellager
JR-Style-Connector
Kompatibel mit 2s Lipo (7.4V), 6-Zellen-Nimh & 2 Zelle A123 (6,6V).

Die BMS-2514 ist Hochleistungs-Servo in Taiwan hergestellt und für alle Anwendungen empfohlen.

  • Artikelbezeichnung BMS-2514
  • Brand Bluebird
  • Gewicht 160.0000
  • Länge 66.00
  • Packaging Width 11.00
  • Höhe 33.00
  • Drehmoment ( kg) (min. 0,01 kg ) 33.20
  • Speed ​​( Sec / 60deg ) 0.13
  • A ( mm) 43.00
  • B (mm) 40.00
  • C ( mm) 38.00
  • D ( mm) 20.00
  • E ( mm) 54.00
  • F ( mm) 28.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Its no titanim gear . Power gear broke - It is aluminim or other soft material. I crash 2,2m model.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Its no titanim gear . Power gear broke - It is aluminim or other soft material. I crash 2,2m model.

This servo are dead after 6 onths on my little axial scx10.

Pinion hs...not good quality like savor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This servo are dead after 6 onths on my little axial scx10.

Pinion hs...not good quality like savor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

.

.

servo de muy buenas cualidades , se puede conectar a 7,4 v , espero que me cumpla con lo descrito en las especificaciones

montado en mi Gmade R1

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

servo de muy buenas cualidades , se puede conectar a 7,4 v , espero que me cumpla con lo descrito en las especificaciones

montado en mi Gmade R1

Ok guys I ordered over 8 pcs of these servos for testing purposes and to install in my planes. All 8 were tested under extreme pull stress starting from 12kg/cm to 19.5kg/cm at 7.4V. The servos easily reach 16.4kg/cm without any problems. The issues begin after 20kg/cm, some of the servos began to buzz and not operate properly. They vibrated and did not move smoothly.



I tested electronics and all was well-made. The gears are good and smooth. Overall, the quality of these servos are okay for those who only need 18kg/cm performance, not more.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok guys I ordered over 8 pcs of these servos for testing purposes and to install in my planes. All 8 were tested under extreme pull stress starting from 12kg/cm to 19.5kg/cm at 7.4V. The servos easily reach 16.4kg/cm without any problems. The issues begin after 20kg/cm, some of the servos began to buzz and not operate properly. They vibrated and did not move smoothly.



I tested electronics and all was well-made. The gears are good and smooth. Overall, the quality of these servos are okay for those who only need 18kg/cm performance, not more.

Very fast and powerful. Accurate, a bit more noise than my hitecs. But great quality at a better price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very fast and powerful. Accurate, a bit more noise than my hitecs. But great quality at a better price.

awesome servo, very strong, I replaced a hitec 7950 with this its a hair weaker, i'd compare it to a hitec 7955, so far i'm very happy. it is power hungry, I had a HK3a UBEC and it would overdraw it and the RX would lose bind, I have that BEC with a reciever capacitor and it works fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

awesome servo, very strong, I replaced a hitec 7950 with this its a hair weaker, i'd compare it to a hitec 7955, so far i'm very happy. it is power hungry, I had a HK3a UBEC and it would overdraw it and the RX would lose bind, I have that BEC with a reciever capacitor and it works fine.

It's a very strong and accurate servo.

I've installed it in my traxxas 1/10 summit instead of 2 pre-installed traxxas 2075 servos.

I'm very happy with this servo!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's a very strong and accurate servo.

I've installed it in my traxxas 1/10 summit instead of 2 pre-installed traxxas 2075 servos.

I'm very happy with this servo!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking