Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

BMS-375DMG Digital Servo (Metal Gear) 1.6kg / .13sec / 11.4g

BMS-375DMG Digital Servo (Metal Gear) 1.6kg / .13sec / 11.4g

Discontinued Product

Please continue searching for a similar product.
Gewicht:
33 g
SKU:
BMS-375DMG
WANT FREE SHIPPING? Click here to find out more!
BMS-373MG Micro Servo (Metal Gear) 1.6kg / .13sec / 11.4g
Blue Bird ist stolz darauf, eine neue Serie von Servos mit vielen neuen Features, hochfeste Materialien und die neueste digitale Technologie bekannt zu geben.
Die BMS-375 Digital Serie sind so konzipiert, um die anspruchsvollsten Anwendungen, einschließlich High-End-Rennfahrer, 3D-Wettbewerb Flugzeuge und Hubschrauber, 1/18 Autos und Segelflugzeug-Anwendungen zu handhaben.
Der Servo wird automatisch die Sendeimpuls-Timings des Benutzers lernen und sperren in das Signal jedes Mal. Der Servo enthält auch eine Signalpuffer in der CPU mit Failsafe-Funktionalität. Der Motor ist für eine bessere elektrische Leitfähigkeit mit 2PEW dünn beschichteten Draht gewickelt und in der Lage, hohe Temperaturen ohne Abbau zu widerstehen.
Der Servo ist mit einem Zubehörpaket und dem universellen JR / Hitec "S" Stecker, die weltweit verkauft werden physisch und elektrisch kompatibel mit allen gängigen Empfänger Marken.
1. M9.6 Kugellager (si-Öl)
2. High-Torque-Motor mit niedrigen RF-Rauschen (CE-zertifiziert)
3. Gummidichtungen für wasserdichte Gehäuse
4. Für 3D-Flugzeug und Hubschrauber, 18.01 Auto und Segelflugzeug-Anwendungen.
5. Futaba kompatibel 25 Zahn Ausgang Splines
6. Digitale Motorantrieb mit ultra-Quadrat-PWM-Signal
7. Automatische Bestimmung der Servomittelpulsbreite
8. Metallräder aus Aluminium 6061 Material mit Licht und starken C95 Material kombiniert
9. Fail-Safe-Funktion
10. 2PEW beschichteten Motorleitung für den Hochtemperatureinsatz
11. Digital-Steuer-IC - SOP-Gehäuse mit 12-Bit-Datenübertragung
12. MOS-FET-Motortreiber-Chips, die Lasten 7A Spitzen verarbeiten kann
13. Nutzbare auf 6.0V


Gewicht: 11,4 Gramm / 0,44 Unzen
Maße: 24,5 x 11,5 x 23 mm / 0,99 x 0,46 x 0,91 Zoll
Drehmoment bei 4,8V: 1,6 kg / cm, 22 oz / in
Drehmoment bei 6,0 V: 2,3 kg / cm, 28 oz / in
Geschwindigkeit, mit 4.8V: 0.13sec / 60 ° bei keiner Last
Geschwindigkeit, bei 6,0V: 0.11sec / 60 ° bei keiner Last
  • Artikelbezeichnung BMS-375DMG
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht ( g) 33.00
  • Länge 62.00
  • Breite 36.00
  • Höhe 50.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

jeu meca 0.04

incertitude de positionnement 0.06

moins bien que HK 922

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

jeu meca 0.04

incertitude de positionnement 0.06

moins bien que HK 922

Mostly works, relatively smooth movements with acceptable centering (could be better tho).

Its algorithm for vibration compensation is not tuned properly and can induce flutter if you shake your eleron with just the right frequency.

It burns if overloaded/blocked for more than 15 seconds or so. Fortunately it didn't kill my bec and my model survived.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mostly works, relatively smooth movements with acceptable centering (could be better tho).

Its algorithm for vibration compensation is not tuned properly and can induce flutter if you shake your eleron with just the right frequency.

It burns if overloaded/blocked for more than 15 seconds or so. Fortunately it didn't kill my bec and my model survived.

I have used these little dynamite servos to replace Futaba s3156. The 375DMG is a little stronger and a little slower than the Futaba, but at 40pcnt of the price! They are fully compatible with the larger, non-micro series of Futaba horns. You need to use the UBEC set for 6 volts for useful speed and avoid heating the linear BEC. These and the 385DMAX servos have a rubber bushing plus eyelet for mounting. You DO NEED these rubber soft mounts to eliminate the servo buzzing. All digital servos need some damping to stop the buzz, and BlueBird has thoughtfully included these items. My only complaint is that there is some variation in performance from servo to servo. You must expect this problem when you pay prices substantially below market, as we are getting less than first pass inspection quality. There are reasons for the low price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have used these little dynamite servos to replace Futaba s3156. The 375DMG is a little stronger and a little slower than the Futaba, but at 40pcnt of the price! They are fully compatible with the larger, non-micro series of Futaba horns. You need to use the UBEC set for 6 volts for useful speed and avoid heating the linear BEC. These and the 385DMAX servos have a rubber bushing plus eyelet for mounting. You DO NEED these rubber soft mounts to eliminate the servo buzzing. All digital servos need some damping to stop the buzz, and BlueBird has thoughtfully included these items. My only complaint is that there is some variation in performance from servo to servo. You must expect this problem when you pay prices substantially below market, as we are getting less than first pass inspection quality. There are reasons for the low price.

Bought 3... 2 are more noisier then third one... one died in 5 minutes... pay less and risk! doesn't worth!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought 3... 2 are more noisier then third one... one died in 5 minutes... pay less and risk! doesn't worth!

Used in my tricopter project. Have some gear play but still works ok. I will not reccomend it for preciese control but for tricopter is ok!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used in my tricopter project. Have some gear play but still works ok. I will not reccomend it for preciese control but for tricopter is ok!

Excellent servos. Can't say enough about these. I did have HS65HB's on my Sport and then swapped to these as a first step towards going FBL and my flip and roll rate doubled without touching ANY radio settings other than EP and ST. Quiet with NO buzzing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent servos. Can't say enough about these. I did have HS65HB's on my Sport and then swapped to these as a first step towards going FBL and my flip and roll rate doubled without touching ANY radio settings other than EP and ST. Quiet with NO buzzing.

I have installed one of this small servos on one 450 size helicopter rudder, in combination with a Futaba 401 GY gyro. For mild flying the servo performs very well, the gyros sensivity was set between 50 and 55 (radio is a Futaba 7C 2,4 GHz.) However when you increase RPM and try some aerobatics the servo is very fast but not strong enough to lock the helis tail. I think is a very good servo, but not strong enough for a 450 helicopter rudder. I will try it as tail servo in my T-Rex 250 and I will post the results.

is very good

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have installed one of this small servos on one 450 size helicopter rudder, in combination with a Futaba 401 GY gyro. For mild flying the servo performs very well, the gyros sensivity was set between 50 and 55 (radio is a Futaba 7C 2,4 GHz.) However when you increase RPM and try some aerobatics the servo is very fast but not strong enough to lock the helis tail. I think is a very good servo, but not strong enough for a 450 helicopter rudder. I will try it as tail servo in my T-Rex 250 and I will post the results.

is very good

this BMS 375dmg servo is top.Perfect centering and stop position. No slop in gears. I use them in my HK450pro and have around 70 flights without any problems with this servo's. Top servo for top price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this BMS 375dmg servo is top.Perfect centering and stop position. No slop in gears. I use them in my HK450pro and have around 70 flights without any problems with this servo's. Top servo for top price.

Great servo! Super inflated price here, $14.00 elsewhere.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great servo! Super inflated price here, $14.00 elsewhere.

BMS 375, I ordered 3servos a a test for my Trex and Hobby King 450 size helis. I agree with all the other positive reviews here, this is a top servo. Perfect centering, stopping, starting and a very fine response on the sticks of my Futaba ff10. Nice item is that there are spare gear sets and that you can use without any problem Futaba servo horns. Again super low Hobby King price here also.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

BMS 375, I ordered 3servos a a test for my Trex and Hobby King 450 size helis. I agree with all the other positive reviews here, this is a top servo. Perfect centering, stopping, starting and a very fine response on the sticks of my Futaba ff10. Nice item is that there are spare gear sets and that you can use without any problem Futaba servo horns. Again super low Hobby King price here also.

  1. 1
  2. 2
  3. 3
  4. 4
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!