Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Kirschholz-Propeller 20x10 (1pc)

Kirschholz-Propeller 20x10 (1pc)

Shipped From:
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

9,57 €
Status:
Auf Lager
Gewicht:
159 g
SKU:
LY90520-20x10
WANT FREE SHIPPING? Click here to find out more!

Geringes Gewicht und dennoch stark Kirschholz ist wunderschön gearbeiteten und laminiert.

  • Artikelbezeichnung LY90520-20x10
  • Brand Turnigy
  • Gewicht ( g) 159.00
  • Länge 505.00
  • Breite 21.00
  • Höhe 50.00
  • Durchmesser X (Inch ) 20.00
  • Pitch Y (Inch ) 10.00
  • Drehung CCW
  • Blade- Count 2
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Hatte den Prop. an einem OS FT 300. Vor dem zweiten Flug, zum Glck noch am Boden zersprang der Prop. bei einem Gas stoss! Wenn ich die Bewertungen da sehe, scheint dies aber ein Einzelfall zu sein. Seit bitte zrozdem vorsichtig beim Motoreneinstellen mit diesem Propeller.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hatte den Prop. an einem OS FT 300. Vor dem zweiten Flug, zum Glck noch am Boden zersprang der Prop. bei einem Gas stoss! Wenn ich die Bewertungen da sehe, scheint dies aber ein Einzelfall zu sein. Seit bitte zrozdem vorsichtig beim Motoreneinstellen mit diesem Propeller.

HELICE DE PRIMEIRA, MUITO BOA

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

HELICE DE PRIMEIRA, MUITO BOA

Just received 2 of these. After enlarging the center hole (it was 9 mm instead of 10) and drilling the other 4 for a DL50, props weight 95 and 97 gr. Considered as light, compared to others. Slightly out of balance, but easily balanced. Stiffer than Master Airscrew, but not as stiff as XOAR or Menz (wooden of course). But Menz and XOAR are heavier as well. Bottom line, for $10, they really worth their price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received 2 of these. After enlarging the center hole (it was 9 mm instead of 10) and drilling the other 4 for a DL50, props weight 95 and 97 gr. Considered as light, compared to others. Slightly out of balance, but easily balanced. Stiffer than Master Airscrew, but not as stiff as XOAR or Menz (wooden of course). But Menz and XOAR are heavier as well. Bottom line, for $10, they really worth their price.

I bought these hoping they would be OK at the price. I drilled out the mounting holes to suit my DL-50, Balanced them, and went flying. I was amazed at how well the aircraft performed. They pulled like crazy and verticals to out of site from take off were easy. They also provide good breaking on vertical downlines. My RPM increased to 7200 from 6600. They are a little noisier than my previous brand but good throttle management controls that.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought these hoping they would be OK at the price. I drilled out the mounting holes to suit my DL-50, Balanced them, and went flying. I was amazed at how well the aircraft performed. They pulled like crazy and verticals to out of site from take off were easy. They also provide good breaking on vertical downlines. My RPM increased to 7200 from 6600. They are a little noisier than my previous brand but good throttle management controls that.

Tres belle helice. semble bien faite . pas de defaut apparent. on doit la perc un peu poue qu elle entre sur le shaft d'un 50cc

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tres belle helice. semble bien faite . pas de defaut apparent. on doit la perc un peu poue qu elle entre sur le shaft d'un 50cc

They look excelent. I have not tested yet

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

They look excelent. I have not tested yet

Nice glossy finish, beautiful wood. Has some minor imperfections (dust, I believe). Hole diameter is 9mm, thickness is 16mm.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice glossy finish, beautiful wood. Has some minor imperfections (dust, I believe). Hole diameter is 9mm, thickness is 16mm.

Great prop! Took a little spray paint on one tip to balance perfectly. Used on a Fuji 50cc gasser mounted on a Great Planes 1/3 Pitts Special. It ran beautifully on the first flight. It also probably saved the crankshaft, as I landed it some long grass and flipped the plane. Broke the prop, but it took the brunt of the crash. The only issue I had with the prop is that the mounting hole is too big, even for a 50cc engine. Wish they had more!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great prop! Took a little spray paint on one tip to balance perfectly. Used on a Fuji 50cc gasser mounted on a Great Planes 1/3 Pitts Special. It ran beautifully on the first flight. It also probably saved the crankshaft, as I landed it some long grass and flipped the plane. Broke the prop, but it took the brunt of the crash. The only issue I had with the prop is that the mounting hole is too big, even for a 50cc engine. Wish they had more!

Nice finish wood propell.

You can not find this propeller for this price in any other place.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice finish wood propell.

You can not find this propeller for this price in any other place.

very good finaly and very resistent.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good finaly and very resistent.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!