Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Corona DS558HV Digitale Metal Gear Servo 14kg / 58g / 0,18 Sec

Corona DS558HV Digitale Metal Gear Servo 14kg / 58g / 0,18 Sec

Shipped From:
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

9,31 €
Status:
Auf Lager
SKU:
014000003
WANT FREE SHIPPING? Click here to find out more!

Corona DS558HV Digitale Metal Gear Servo 14kg / 58g / 0,18 Sec

Modell: DS558MG
Betriebsspannung: 6.0V / 7.4V
Betriebsstrom: 300mA / 400mA
Betriebsgeschwindigkeit: 0.20sec.60º / 0.18sec.60º
Stall Drehmoment: 12kg.cm / 14kg.cm
Größe: 20X40X38.5mm
Gewicht: 58g
Totband: ≤3uSec
Betriebs Reisen: 40º / der einen Seite Puls reisen 400us
Potentiometer: 5 Schieber / Direct Drive
Kugellager: MR106
Getriebe: Metall
Stecker Draht: 300mm
Betriebstemperaturbereich: -20 ° C + 60c

  • Artikelbezeichnung 014000003
  • Brand Corona
  • Gewicht 77.0000
  • Länge 80.00
  • Packaging Width 40.00
  • Höhe 56.00
  • Drehmoment ( kg) (min. 0,01 kg ) 14.00
  • Speed ​​( Sec / 60deg ) 0.18
  • A ( mm) 43.00
  • B (mm) 40.00
  • C ( mm) 40.00
  • D ( mm) 20.00
  • E ( mm) 53.00
  • F ( mm) 27.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Kraftvoll ja , aber Nullpunkt könnte besser sein ,weicht 2 mm ab!!!

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Kraftvoll ja , aber Nullpunkt könnte besser sein ,weicht 2 mm ab!!!

I bought 6 of these and two quiet setting them up to center them on the bench. Not sure I wan't to use the them at all now. I don't think its worth the change.
Stay away from these...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 6 of these and two quiet setting them up to center them on the bench. Not sure I wan't to use the them at all now. I don't think its worth the change.
Stay away from these...

Servo attachments are breaking. I brought 6 servos.. all of them damaged.. HK has to correct this quality issue...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Servo attachments are breaking. I brought 6 servos.. all of them damaged.. HK has to correct this quality issue...

This servo has more travel in one direction then the other. Not sure why. never encountered a servo like this. Not suitable for cars/trucks as you have more steering in one direction. Even says so in the description "Operating Travel: 40/one side " my badd,, it is quality made servo, and has great torque, but besides that ONE MAJOR flaw it would have been great LOL be warned!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This servo has more travel in one direction then the other. Not sure why. never encountered a servo like this. Not suitable for cars/trucks as you have more steering in one direction. Even says so in the description "Operating Travel: 40/one side " my badd,, it is quality made servo, and has great torque, but besides that ONE MAJOR flaw it would have been great LOL be warned!

Otimo produto! Recomendo a compra!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Otimo produto! Recomendo a compra!!

This is a really Stron Servo and a Bargain Price if your looking for a Stong pull servo this is your guy.

However you may have a say when it comes to Time response. So if you want to fit it in a plane or HELI you may want to go for something with a very low response time ex. 0.05s.

It's all up to you :^)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a really Stron Servo and a Bargain Price if your looking for a Stong pull servo this is your guy.

However you may have a say when it comes to Time response. So if you want to fit it in a plane or HELI you may want to go for something with a very low response time ex. 0.05s.

It's all up to you :^)

Tolles Servo fr kleines Geld, an 2S echt stark, verwende 7 Stck von diesen Servos in meiner Piper und ich bin wirklich zufrieden damit.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tolles Servo fr kleines Geld, an 2S echt stark, verwende 7 Stck von diesen Servos in meiner Piper und ich bin wirklich zufrieden damit.

Servo forte, porm pouco preciso. No centra bem. Instalei no meu sbach 30 cc e vou trocar, pois no ficou bom.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Servo forte, porm pouco preciso. No centra bem. Instalei no meu sbach 30 cc e vou trocar, pois no ficou bom.

Man this servo is strong, i put it into my Ofna ultra LX2e and it worked great! very recommended upgrade!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Man this servo is strong, i put it into my Ofna ultra LX2e and it worked great! very recommended upgrade!

All metal gear box!
Gears are well silicon grease lubricated!
Ball bearings - 2pcs
Solid PCB w direct soldered motor.

Test conditions:
- power grom LiFe 2500mah 2S = 6.6 nom.V;
- servo arm - metal futaba style;
- load weight 4.5 kg at 2 cm leg = 9kg/cm;
- servo is side mounted;
- the weight ballast is on the ground when the arm is in full down position = 0 load;

The servo can hold up to 80 continuous cycles after that the board and motor are overheated! At Holding position - 0.6A. At start position - 1.2A
The work cycles was with 4kg/cm, 1sec pause between cycles, 500 cycles in series with 1 hour pause.
Total count cycles = 30000 till brushes of the motor burn !!!!
No any damadge to the gear box!! Additional loop in the gears is normal!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

All metal gear box!
Gears are well silicon grease lubricated!
Ball bearings - 2pcs
Solid PCB w direct soldered motor.

Test conditions:
- power grom LiFe 2500mah 2S = 6.6 nom.V;
- servo arm - metal futaba style;
- load weight 4.5 kg at 2 cm leg = 9kg/cm;
- servo is side mounted;
- the weight ballast is on the ground when the arm is in full down position = 0 load;

The servo can hold up to 80 continuous cycles after that the board and motor are overheated! At Holding position - 0.6A. At start position - 1.2A
The work cycles was with 4kg/cm, 1sec pause between cycles, 500 cycles in series with 1 hour pause.
Total count cycles = 30000 till brushes of the motor burn !!!!
No any damadge to the gear box!! Additional loop in the gears is normal!

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!