Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Corona DS939HV Digitale Metal Gear Servo 2.8kg / 0.12sec / 12.5g

Corona DS939HV Digitale Metal Gear Servo 2.8kg / 0.12sec / 12.5g

Shipped From:
  • USA
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

6,20 €
Status:
Auf Lager
Gewicht:
28 g
SKU:
DS939MG-HV
WANT FREE SHIPPING? Click here to find out more!
Corona DS939HV Digitale Metal Gear Servo 2.8kg / 0.12sec / 12.5g
Modell: DS939HV
Betriebsspannung: 6.0V / 7.2V
Betriebsstrom: 200mA / 240mA
Betriebsgeschwindigkeit: 0.13sec.60º / 0.12sec.60º
Stall Drehmoment: 2.6kg.cm / 2.8kg.cm
Größe: 22.5X11.5X24.6mm (0,88 "x0.45" x0.96 ")
Gewicht: 12,5 g
Totband: ≤3uSec
Betriebs Reisen: 40º / der einen Seite Puls reisen 400us
Potentiometer: 2 Schieber / Direct Drive
Kugellager: MR85
Getriebe: Metall
Stecker Draht: 215mm
Betriebstemperaturbereich: -20 ° C + 60 ° C
  • Artikelbezeichnung DS939MG-HV
  • Brand Corona
  • Gewicht ( g) 28.00
  • Länge 45.00
  • Breite 30.00
  • Höhe 40.00
  • Unit Weight (g) 12.5
  • Drehmoment ( kg) (min. 0,01 kg ) 2.80
  • Speed ​​( Sec / 60deg ) 0.12
  • A ( mm) 31.00
  • B (mm) 23.00
  • C ( mm) 28.00
  • D ( mm) 12.00
  • E ( mm) 32.00
  • F ( mm) 19.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Bought 2 of these servos. Both have a wrong thread size of the screw for the horns. No matter how hard I tried the screw went in just a little into the servo shaft and it gets stuck. The horn still moves up and down. Crappy design...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought 2 of these servos. Both have a wrong thread size of the screw for the horns. No matter how hard I tried the screw went in just a little into the servo shaft and it gets stuck. The horn still moves up and down. Crappy design...

I bought 3 of these to use as throttle servos on my nitro helis (using G-Force adapter plates). On the servo tester they work well, smooth and good centering. In the heli, they jitter terribly. They won't play nice with any other servo. They create a huge amount of electrical noise and make the other servos in the heli jitter as well! (Mix of savox/Hitec HV servos running on unregulated 2s lipo). Maybe they'd be ok if you didn't mix them with other servos. And the cases are still made of the same old super-brittle plastic.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 3 of these to use as throttle servos on my nitro helis (using G-Force adapter plates). On the servo tester they work well, smooth and good centering. In the heli, they jitter terribly. They won't play nice with any other servo. They create a huge amount of electrical noise and make the other servos in the heli jitter as well! (Mix of savox/Hitec HV servos running on unregulated 2s lipo). Maybe they'd be ok if you didn't mix them with other servos. And the cases are still made of the same old super-brittle plastic.

Best servo yet. I've been using this as my go to servo from slopers to standard class sailplanes for a few years now. Most recently as the servos in all my 2M and 2.5M sailplanes pure and motor on AERF. They are powerful and work awesomely. They are also being used in a current 3M project... they are that reliable. Operating 4.8V to 7.4V(2C LiPo). Yep, I like 'em^)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Best servo yet. I've been using this as my go to servo from slopers to standard class sailplanes for a few years now. Most recently as the servos in all my 2M and 2.5M sailplanes pure and motor on AERF. They are powerful and work awesomely. They are also being used in a current 3M project... they are that reliable. Operating 4.8V to 7.4V(2C LiPo). Yep, I like 'em^)

Having seen that these can be used on 2s lipo directly, eliminating a SBEC/UBEC, while using a HV (FrSky 8ch) Rx I bought some to try. They work but seem quite "jerky" on 2s lipo and my Taranis 9D Tx. They work smoothly with a 4pack nimh and servo tester (though presumably with less power) so it'll be interesting to see what happens in a model. Think I'll start with something I don't care too much about.... I can always go back to using nimh or UBEC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Having seen that these can be used on 2s lipo directly, eliminating a SBEC/UBEC, while using a HV (FrSky 8ch) Rx I bought some to try. They work but seem quite "jerky" on 2s lipo and my Taranis 9D Tx. They work smoothly with a 4pack nimh and servo tester (though presumably with less power) so it'll be interesting to see what happens in a model. Think I'll start with something I don't care too much about.... I can always go back to using nimh or UBEC.

Para el precio que tiene muy buena calidad

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Para el precio que tiene muy buena calidad

Super god og billig servo. Momsen skal ned i DK foer vi gaar konkurs

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super god og billig servo. Momsen skal ned i DK foer vi gaar konkurs

Great servo. very well packaged no shipping damage. strong and reliable from what I have been able to see. Nice neat package.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great servo. very well packaged no shipping damage. strong and reliable from what I have been able to see. Nice neat package.

Excellent servo. Using 2s lipos for power. I've ordered at least 20 of these servos and all.work great. From slope wings, 2M and my 2.6 ALES. Got 8 more coming... Half yearly sale saves almost $3 each!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent servo. Using 2s lipos for power. I've ordered at least 20 of these servos and all.work great. From slope wings, 2M and my 2.6 ALES. Got 8 more coming... Half yearly sale saves almost $3 each!!!

Bought 4 of these, one of theme ha some slop in gears but was usable.
They were quick at 2 celle Life (7,2 Volt) and centered well.
Gone buy more of these.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought 4 of these, one of theme ha some slop in gears but was usable.
They were quick at 2 celle Life (7,2 Volt) and centered well.
Gone buy more of these.

Trs bon petit servo. Fonctionne trs bien, et est plutt rapide et silencieux malgr une utilisation en 5v au lieu des 6-7.2 conseills. Il est aussi assez puissant. Je le conseille.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Trs bon petit servo. Fonctionne trs bien, et est plutt rapide et silencieux malgr une utilisation en 5v au lieu des 6-7.2 conseills. Il est aussi assez puissant. Je le conseille.

  1. 1
  2. 2
Customer files
picture Corona DS939HV Digital Metal Gea Download [787]
Corona DS939HV Digitale Metal Dim.png Download [21]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!