Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

D541BB-v2 Digi-Micro Servo 0.6kg / .09sec /4.4g (AUSVERKAUF)

D541BB-v2 Digi-Micro Servo 0.6kg / .09sec /4.4g (AUSVERKAUF)

Discontinued Product

Please continue searching for a similar product.
SKU:
D541BB
WANT FREE SHIPPING? Click here to find out more!

*************************
Aufgrund
des Fabrik - Versorgungsprobleme wird die D54BB Servo '' und mit einem Abschlag '' AUSVERKAUF '' Bewertung 'wie'. Es wird keine Gewähr für Richtigkeit bzw. zu diesem Thema gegeben.
*************************

Arced Digital - Micro Servo

Mit einer High-Fidelity-MCU und einem ausgezeichneten Algorithmus, versicherte youre einer reibungslosen Betrieb und weniger Lärm interuptions.
Frequency Conversion-Technologie hält die Servokühler unter anspruchsvollen 3D und Helikopterflug, während auch den Stromverbrauch niedrig zu halten.

Features:
Arced Digital Servo nimmt Frequenzumsetzung Technologie, die es kühl bleiben unter wilden und erweiterten 3D-Flug macht und hält den Stromverbrauch sehr gering.
Extrem schmale Totzone (¡Ü 3|Ìs) realisiert führende Empfindlichkeit Industrie.
Fail-Safe-Funktion (Lost Signal Protection) --- arced Digital Servo hält seine Position und Drehmoment bei gelegentlichen Signal verloren.
Voll AVCS Gyro DS-Modus konform
Geringes Gewicht, aber dauerhaften Struktur wird die 3D-Beweglichkeit Ihrer Ebene nicht stören.

Spec @ 4.8V
Drehmoment: 0,6 kg / cm (dynamisches Drehmoment ***)
Geschwindigkeit: 0.09sec / 60degrees
Abmessungen 19x19.5x8mm
Gewicht: 4,4 g
Genaue Neutralstellung
Sehr schmale Totzone (<3us)
Inbuilt Fail-Safe (hält die Stellung, wenn sie verloren Signal)
Futaba AVCS Gyro DS-Modus conpliant.

**Notizen
Kommt mit Hörnern!
Dies ist ein v2 Servo. Es hat die folgenden Verbesserungen;
-Viel Breiteren Spannungsbereich 3 ~ 6v
-Works Mit allen Leistungssystemen ESC / BEC, UBEC, NiMH / NiCd
-Drehmoment Verbessert DYNAMIC zu .60kg. Dynamisches Drehmoment ist das Gewicht, bei dem die Servo die Arme bewegen kann. Im Gegensatz zu Kippmoment, das ein höheres Gewicht ist, bedeutet noch der Arm Servo nicht bewegen kann.

WARNUNG
Diese Servos sollte nicht für längere Zeit bei 6 V betrieben werden, da dies den Mikrokernlosen Motor beschädigen kann. Bitte verwenden 4.8 ~ 5.4V für eine länger anhaltende Servo.

  • Artikelbezeichnung D541BB
  • Brand -
  • Gewicht 19.0000
  • Länge 0.00
  • Breite 0.00
  • Höhe 0.00
  • Drehmoment ( kg) (min. 0,01 kg ) 0.50
  • Speed ​​( Sec / 60deg ) 0.09
  • A ( mm) 27.00
  • B (mm) 20.00
  • C ( mm) 24.00
  • D ( mm) 9.00
  • E ( mm) 27.00
  • F ( mm) 15.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

good servos... but very delicate...smooth and accurate . i see a lot of bad reviews, but i have no complaints. you must be careful installing/adjusting linkage and servo horn, the gears are that delicate.

NEVER force movement of servo horn/gears or it over johnny.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good servos... but very delicate...smooth and accurate . i see a lot of bad reviews, but i have no complaints. you must be careful installing/adjusting linkage and servo horn, the gears are that delicate.

NEVER force movement of servo horn/gears or it over johnny.

J'ai achet plusieurs servos ARCED dont des D531bb D541bb et ai toujours eu des problmes. Blocages, pignons non aligns, patinages, accoups, rotation permanente!. Ils sont instables au repos, bruyants et consomment plus que des analogiques.

La mcanique de base est celle des "Arrow" mais sont moins biens monts.

Waste of money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

J'ai achet plusieurs servos ARCED dont des D531bb D541bb et ai toujours eu des problmes. Blocages, pignons non aligns, patinages, accoups, rotation permanente!. Ils sont instables au repos, bruyants et consomment plus que des analogiques.

La mcanique de base est celle des "Arrow" mais sont moins biens monts.

Waste of money.

Hi,

this is the second time i buy them, last time was one year ago. Both times they worked totally perfect, cant say anything bad about them (okay, theyre loud, but all digital servos are louder than normal ones). Theyre fast, accurate and light (okay, 4,9gr. - 0,5 more than advertised).

I use them in an 125gr. Indoor plane (Knuffel) - and i test them hardly (crashs...) - no problem!

I will buy more - thanks UH!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi,

this is the second time i buy them, last time was one year ago. Both times they worked totally perfect, cant say anything bad about them (okay, theyre loud, but all digital servos are louder than normal ones). Theyre fast, accurate and light (okay, 4,9gr. - 0,5 more than advertised).

I use them in an 125gr. Indoor plane (Knuffel) - and i test them hardly (crashs...) - no problem!

I will buy more - thanks UH!!

realy good servo.good acuracy , speed ...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

realy good servo.good acuracy , speed ...

super fast responce but dont overwork them or they will wear out quick other than that they are great i would recomend to all heli uses

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

super fast responce but dont overwork them or they will wear out quick other than that they are great i would recomend to all heli uses

waste of money, the first one was broken immediately and the second one after short periood of time. Inexact and inaccurate movement.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

waste of money, the first one was broken immediately and the second one after short periood of time. Inexact and inaccurate movement.

Garbage. I bought six, none work. I am using a Spektrum radio, but I don't think that should matter. All they do is twitch a little, no response to stick movement.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Garbage. I bought six, none work. I am using a Spektrum radio, but I don't think that should matter. All they do is twitch a little, no response to stick movement.

Lightweight, fast, fairly precise and perhaps most importantly (to me at least), they center well. However, the reliability is a big issue. As I and my clubmates have found out, many doesn't work out of the box or break down after almost no use at all.



If you are lucky enough to get a good batch then they will serve you well. Although the chances of that happening is unfortunately not terribly good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Lightweight, fast, fairly precise and perhaps most importantly (to me at least), they center well. However, the reliability is a big issue. As I and my clubmates have found out, many doesn't work out of the box or break down after almost no use at all.



If you are lucky enough to get a good batch then they will serve you well. Although the chances of that happening is unfortunately not terribly good.

Sur 6 servos D541BB Digi-v2-Micro commands et essays, seulement 4 fonctionnent. Les 2 autres restent bloqus lorsqu'ils sont actionns. Dommage, ils sont vraiment trs rapides, trop peut-tre !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sur 6 servos D541BB Digi-v2-Micro commands et essays, seulement 4 fonctionnent. Les 2 autres restent bloqus lorsqu'ils sont actionns. Dommage, ils sont vraiment trs rapides, trop peut-tre !

j'en ai achet 2, crams au bout de 15 secondes !

videmment il faut les renvoyer...

je suis plus que dsapoint et tonn. Certains sont parfaitement satisfaits et d'autres ont des problmes pas possibles. s'il faut coller les pignons sur les axes la cyano avant de s'en servir il faut le prciser sur la notice ou les vendre en kit ! je ne renouvelle pas l'exprience merci bien !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

j'en ai achet 2, crams au bout de 15 secondes !

videmment il faut les renvoyer...

je suis plus que dsapoint et tonn. Certains sont parfaitement satisfaits et d'autres ont des problmes pas possibles. s'il faut coller les pignons sur les axes la cyano avant de s'en servir il faut le prciser sur la notice ou les vendre en kit ! je ne renouvelle pas l'exprience merci bien !

  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!