The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The full-size Royal Aircraft Factory S.E.5A was one of the fastest airplanes of World War 1, it was also very stable and maneuverable and regarded as the "Spitfire" of WW1. Together with the Sopwith Camel, the S.E.5A was instrumental in regaining Allied air supremacy over the German fighters of the time.

The Dancings Wings Hobby S.E.5A is very straightforward to assemble but will require some previous experience. All the major components such as the fuselage, wings, horizontal stab, and vertical stab are built and covered, and a full decal sheet is supplied. You must supply your own brushless motor, ESC, servos, transmitter, receiver, and a LiPo battery. You will also require some tools and glue to complete the build.

Features:
• Authentic-looking scale model of the S.E.5A WW1 fighter
• Constructed of strong, lightweight balsa
• Supplied with scale dummy exhausts, scale wheels, and dummy machine gun
• Airframe is factory-covered
• Includes a full decal sheet
• Supplied with a complete hardware kit including scale rigging

Specs:
Type: Dancing Wings Hobby (ARF) S.E.5A WW1 Biplane Fighter
Wingspan: 1620mm (64")
Length: 1250mm (49")
Flying Weight (Approx): 3.1kg (6.8lb)
Building Level: ARF kit (Almost Ready to Fly) does require assembly
Construction: Balsa wood with factory-applied covering

Included:
1 x Fuselage
1 x Pair of upper/lower wings
1 x Dummy exhausts
1 x Motor mount
1 x Horizontal stab
1 x Vertical stab w/rudder
1 x Landing gear
1 x Pair of scale wheels
1 x PVC windshield
1 x Dummy machine gun
1 x Assorted carbon tubes
1 x Scale rigging kit
1 x Complete hardware pack

Required:
Motor: 3520/4220-500/800KV brushless outrunner
ESC: 60~80A brushless
Propeller: 14x6" or similar
Battery: 4S 2200~4000mAh LiPo
Servos: 4 x 16~18g
Radio: 4ch or more
Tools: Modelling knife, pliers, metal ruler, pin-vice, drills, etc
Glue: 20min epoxy or white glue, medium CA, thread-lock