Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Darkwing FPV Drone 1727mm Kunstoff (ARF)

Darkwing FPV Drone 1727mm Kunstoff (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
252000003
WANT FREE SHIPPING? Click here to find out more!

Der H-König Darkwing ist ein großer Verbund Nurflügel speziell für FPV entworfen, mit seinem schlanken Design und bedrohlichen Linien, das ist eine fantastisch aussehende Modell!

Der zentrale Rumpfsektion und Winglets sind aus stabilem Fiberglas gefertigt, während der Flügel ausgerollt wird, traditionelle Bauweise Balsa für lange Lebensdauer. Trotz seiner Größe ist das Darkwing praktisch mit beiden Flügeln stecken ist, kann dieses Modell Feld in Minuten zusammengebaut werden und ist leicht zu transportieren. Als Delta, ist es natürlich eine einfache 2-Servo Angelegenheit ist, gibt es eine enorme Menge an Raum ist in unter dem großen Baldachin für Lipoly der und FPV Ausrüstung, ist die Motorhalterung auch sehr beträchtlich, offensichtlich Motor Wahl auf Nutzlast abhängen. Die Darkwing hat kein Fahrwerk und eine Startrampe, alternativ Umstellung auf feste oder sogar Einfahren Fahrwerk wird für den erfahrenen Modellierer recht einfach sein müssen.

Die Darkwing wird zweifellos machen für ein fantastisches Sportflugmodell mit freundlicher Genehmigung von es ist eine effiziente und schlanke aerodynamisches Design, aber es das Herz, das ist eine futuristisch anmutende FPV-Plattform, die eine hohe Nutzlastkapazität verfügt und verfügt über ausgezeichnete Stall und Gleiteigenschaften. Die schiere Größe und bedrohliche Linien der Darkwing Kiefer verursachen wird fallen, wohin Sie fliegen, dann ist dies ein Rest weisendes Modell, das für die High-Tech-Welt der FPV perfekt ist.

Eigenschaften:
Erstaunlich High-Tech-Look
Tough Glasfaser Rumpf
Massiver Nutzlastfähigkeit
Einfache und schnelle Montage vor
Stecken Sie Flügel für den einfachen Transport
Niedrige Baukosten

Specs:
Spannweite: 1727mm
Länge (Rumpf): 762mm
Flügelfläche: 49.3dm2
Trockengewicht: 1400g

Benötigt:
Ihre eigenen 4-Kanal-TX / RX mit Delta-Misch
42mm Brushless Outrunner Motor
60A ~ 80A ESC
2 x Standardgröße MG Servo
3700mAh ~ 5000mAh 4s Lipo-Akku
FPV Ausrüstung

Handbuch zu finden sind hier

  • Artikelbezeichnung 252000003
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 3845.0000
  • Länge 830.00
  • Breite 285.00
  • Höhe 390.00
  • Dark Wing FPV Drone
  • Hobby King Darkwing FPV Drone
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I fitted my drone with twin Leopard EDF jet engines. It looks great, flies great and sounds great. I also gave it a fixed tail to eliminate flat spins and fixed landing gear for easy take offs and landings.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I fitted my drone with twin Leopard EDF jet engines. It looks great, flies great and sounds great. I also gave it a fixed tail to eliminate flat spins and fixed landing gear for easy take offs and landings.

For the only person that I actually have seen fling this plane, It is a pain to take off the ground! if you don't have a body" to tow your plane, The expenses of making a launch ramp have to be added to this model! but may be the mos annoying thing is the the cockpit cover, It is hard to keep it from falling down out of the plane and the fact that is not clear make at least for me a very hard decision to put the money on to it! I hope that they make the proper adjustments! like the option ready, of landing gear. Because there are lots of people like me that constantly are looking for a better platform for our UAV's, and all those styrofoam planes eventually wear out! living use with almost nothing! Hey I have an X8 from sky walker! and if your don't take the time to cover it either on fiberglass or in some kind of Vinyl tape! your will have a pile of garbage on not time! so please HB keep in mind people like us!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For the only person that I actually have seen fling this plane, It is a pain to take off the ground! if you don't have a body" to tow your plane, The expenses of making a launch ramp have to be added to this model! but may be the mos annoying thing is the the cockpit cover, It is hard to keep it from falling down out of the plane and the fact that is not clear make at least for me a very hard decision to put the money on to it! I hope that they make the proper adjustments! like the option ready, of landing gear. Because there are lots of people like me that constantly are looking for a better platform for our UAV's, and all those styrofoam planes eventually wear out! living use with almost nothing! Hey I have an X8 from sky walker! and if your don't take the time to cover it either on fiberglass or in some kind of Vinyl tape! your will have a pile of garbage on not time! so please HB keep in mind people like us!

This Darkwing flies really well, it is really stable and the speed was ok. I used 4cell 5000mah with motor 950kw and a 12/6 prop. However the color black isnt my first choice for this airplane, in a distance it gets difficult to see so I crashed mine. Good airplanes just dont fly long way from the starting point. Now I ordered the new x8 (white)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This Darkwing flies really well, it is really stable and the speed was ok. I used 4cell 5000mah with motor 950kw and a 12/6 prop. However the color black isnt my first choice for this airplane, in a distance it gets difficult to see so I crashed mine. Good airplanes just dont fly long way from the starting point. Now I ordered the new x8 (white)

gli alettoni sono un cm. pi corti,la colorazione sul dorso dovrebbe essere bianca, la capottina manca degli incastri,il foro per i servi v realizzato nella parte superiore dell'ala, finitura verniciata discreta

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

gli alettoni sono un cm. pi corti,la colorazione sul dorso dovrebbe essere bianca, la capottina manca degli incastri,il foro per i servi v realizzato nella parte superiore dell'ala, finitura verniciata discreta

Thank you for your help guys. I find the CG of this great flying wings and I also instaled an electric landind gear. It's really beautiful. The CG is 42cm from the edge.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Thank you for your help guys. I find the CG of this great flying wings and I also instaled an electric landind gear. It's really beautiful. The CG is 42cm from the edge.

I ordered mine but unfortunately I received no assembly manual and now my big problem is the CG anyone has an idea?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I ordered mine but unfortunately I received no assembly manual and now my big problem is the CG anyone has an idea?

Customer files
No File Name Download [1748]
No File Name Download [2665]
Manual and CG Download [1914]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save