Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Dart 250 FPV Mit Power Distribution, säubern und schmutziger und LED-Beleuchtung

Dart 250 FPV Mit Power Distribution, säubern und schmutziger und LED-Beleuchtung

Shipped From:
  • USA
QTY:

Now save Speichern 38,76 € 38,76 €

Special Price 12,33 € 12,33 €

You save Speichern 38,76 € 38,76 €

Was  51,09 €

Status:
Auf Lager
SKU:
415000006-0
WANT FREE SHIPPING? Click here to find out more!

FUN-RC stellt die Dart 250 Mini H Quad, vollgepackt mit Features, die auf dem Markt jede Mini-Spiele und behält noch ein Fun Preisschild.

Der Dart ... Serie von Fun-RC-Packs einige großartige Funktionen, Design, Haltbarkeit, sieht gut aus und noch nicht die Bank sprengen .. Die Rahmen sind mit einem sauberen und schmutzigen Schwingungsisolationssystem, entwickelt, um die Kamera und Flugregler ein zu geben schöne glatte Fahrt. Die Schwingungs Fingerhüte haben Hardware, die sie im Falle eines Absturzes angebracht hält. Der Dart hat auch eine im Stromverteilungssystem aufgebaut, dass die esc der Halterungen sowie direkte hat für XT60 / T-Verbinder Montage, integrierte LED-Leuchten Orientierung Kopf und Aux-Ausgänge für A / V und dem FC! Der Rahmen hat CNC gefräste Kanäle zur Führung der Kabel durch den Rahmen, so dass dies einer der saubersten installiert ein Mini haben kann. Dazu gehören poliert und eloxierten Rahmen Hardware und sogar Motormontageteile. Die Motor Arme sind eine nette bullige 5mm dick für Crash-frei Schaden, und doch machte Licht in den richtigen Stellen. Der Pfeil hat auch Montagemöglichkeiten für Kameras für FPV und HD, montiert nach vorne und weg von prop Ansicht.

Wenn Sie den Dart im Vergleich zur Konkurrenz glaube, das einzige, dass weniger ist das Preisschild.

Eigenschaften:
• Reinigen und Schmutz Schwingungsisolationssystem mit Crash-Schlösser
• Stromverteilung mit eingebautem Netzanschluss Halterung und Spot-Lichter LED
• Poliert und eloxiert Hardware
• Drahtführungskanäle für eine saubere Installation
• 5 mm dicken Motor Arme

Specs:
Radstand: 250 mm
Gewicht: 135 g
Verpackungsgröße: 22.5 * 6 * 3.5 (CM)

Erforderlich:
Motor: 1806-2208 kv2000 ~ 2300
Propeller: 5x3
Flugsteuerung: 30-45mm Montageabstand
Batterie: 3s 1300-1800ma
5ch-Radio

* Hinweis: Hardware nicht Bilder zeigen in ist im Preis inbegriffen

  • Artikelbezeichnung 415000006-0
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 180.0000
  • Länge 220.00
  • Breite 30.00
  • Höhe 60.00
  • Dart 250 400 FPV Quad Frame
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

OK here is the deal i got 3 of these when they came on sale for less then the full price and i still think i paid too much. The arms can not stand up to much of a crash and the frame will break as well in not much of a crash. The only thing this would be good for is simple fpv of someone who already knows how to fly and wont crash. No FPV racing here guys it just wont stand up to it. The frame is light and power distribution is good but the screws are 2mm or something and have a shallow hex hole so tightening them down can be a pain. This is not the drone you are looking for guys HK has much better options for the same or less.
PS lost fpv on first real flight came down on soft grass hard but not anything crazy and broke 3 arms.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

OK here is the deal i got 3 of these when they came on sale for less then the full price and i still think i paid too much. The arms can not stand up to much of a crash and the frame will break as well in not much of a crash. The only thing this would be good for is simple fpv of someone who already knows how to fly and wont crash. No FPV racing here guys it just wont stand up to it. The frame is light and power distribution is good but the screws are 2mm or something and have a shallow hex hole so tightening them down can be a pain. This is not the drone you are looking for guys HK has much better options for the same or less.
PS lost fpv on first real flight came down on soft grass hard but not anything crazy and broke 3 arms.

cute and tiny quad, packaging is so small its like a watch case. thin arms I don't think they love crashes, lets see how long will it take to destroy this lol

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

cute and tiny quad, packaging is so small its like a watch case. thin arms I don't think they love crashes, lets see how long will it take to destroy this lol

Really good design. Lower cage is stiff and robust, upper cage is more flimsy, but survived the crash which broke all 4 motor arms. Lots of space for FPV etc. Flies good with cc3d atom (version in protective case from HK)

Plastic screws were replaced with cable ties almost on day one.
For the price it is probably wise to buy second kit to be used as spares but people like to upgrade something they build with their own hands more than build another one :).
Will be great if upgrade parts will be available for the kit - CF plates, CF or aluminum motor arms etc.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really good design. Lower cage is stiff and robust, upper cage is more flimsy, but survived the crash which broke all 4 motor arms. Lots of space for FPV etc. Flies good with cc3d atom (version in protective case from HK)

Plastic screws were replaced with cable ties almost on day one.
For the price it is probably wise to buy second kit to be used as spares but people like to upgrade something they build with their own hands more than build another one :).
Will be great if upgrade parts will be available for the kit - CF plates, CF or aluminum motor arms etc.

Good little frame. Arrived with all needed screws. rigidity is very good once correctly assembled. Arms seem strange, a kind of solid plastic or resin. Obviously, it is the weak part of this Racer. let's see when I will get its new RX.

Anyway, the conception Clean/Dirty is very good, The whole FC platin on silent blocks helps a lot to improve smoothness. smart ! You can set up whatever you want or you need inside : FPV gear, Osd, GPS, Baro, Mag, Lipo alarm, ... nothing should be damaged in case of crash !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good little frame. Arrived with all needed screws. rigidity is very good once correctly assembled. Arms seem strange, a kind of solid plastic or resin. Obviously, it is the weak part of this Racer. let's see when I will get its new RX.

Anyway, the conception Clean/Dirty is very good, The whole FC platin on silent blocks helps a lot to improve smoothness. smart ! You can set up whatever you want or you need inside : FPV gear, Osd, GPS, Baro, Mag, Lipo alarm, ... nothing should be damaged in case of crash !

I am using this frame and I have crashed it several times. It is quite surprising that the main body can absorb some significant impact. One of those crashes was an intended roll flip which ended up as a half circle and plunged to the ground. The main frame survived, it's the arms that always breaks, most of the time you can just super glue it back together, that is if you are lucky enough not to shatter it into pieces and it's unfortunate that hobby king is currently out of stock for the replacement arms. but all in all, this frame is a lot of fun...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am using this frame and I have crashed it several times. It is quite surprising that the main body can absorb some significant impact. One of those crashes was an intended roll flip which ended up as a half circle and plunged to the ground. The main frame survived, it's the arms that always breaks, most of the time you can just super glue it back together, that is if you are lucky enough not to shatter it into pieces and it's unfortunate that hobby king is currently out of stock for the replacement arms. but all in all, this frame is a lot of fun...

I bought this as my first quad. I'm no "pro" by any stretch of the imagination, so I am still learning as I go. At first I was a bit hesitant because each of the black frame pieces seemed to be flimsy...although, once I got it built and everything tightened up, the frame is actually quite solid and rigid. I'll be eager to get the electronics installed and get flying. For the money....I'd say its a great frame.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this as my first quad. I'm no "pro" by any stretch of the imagination, so I am still learning as I go. At first I was a bit hesitant because each of the black frame pieces seemed to be flimsy...although, once I got it built and everything tightened up, the frame is actually quite solid and rigid. I'll be eager to get the electronics installed and get flying. For the money....I'd say its a great frame.

I use it with the Baby Beast V2 motors on 4S Turnigy Nanotech 1300mAh and HQ5045 Props, awesome!!!!! Use it for FPV flights

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use it with the Baby Beast V2 motors on 4S Turnigy Nanotech 1300mAh and HQ5045 Props, awesome!!!!! Use it for FPV flights

Couldn't be happier with this frame. I love the dirty/clean section design. Frame went together without any problems.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Couldn't be happier with this frame. I love the dirty/clean section design. Frame went together without any problems.

Quite the fine frame, I received this as a gift from the Mrs. Arms are sturdy in my opinion, the frame does need a bit of prep for the tabs, but overall, a breeze to put together. Solder points are at just the right distance for even the most ham fisted hands out there and I really like the LED light bar, although it's rather unnecessary. I don't mind the G10, you can strengthen by using thin CA on the edges and using additional nylon posts, I have dropped this frame the same way I was dropped as a child, like me, it survived even after bouncing off a hardwood floor. 5 stars from me.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quite the fine frame, I received this as a gift from the Mrs. Arms are sturdy in my opinion, the frame does need a bit of prep for the tabs, but overall, a breeze to put together. Solder points are at just the right distance for even the most ham fisted hands out there and I really like the LED light bar, although it's rather unnecessary. I don't mind the G10, you can strengthen by using thin CA on the edges and using additional nylon posts, I have dropped this frame the same way I was dropped as a child, like me, it survived even after bouncing off a hardwood floor. 5 stars from me.

This is a great frame. I don't think it can be beaten in terms of value for money. The build was simple and everything went together perfectly. It's a very well thought out design and has excellent flying characteristics. Admittedly, I haven't performed any significant crash testing, but so far everything is holding up well. Highly recommended!
My setup: Multistar Elite motors, Afro 12amp ESC's, Naze32 controller, 5x3 props.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a great frame. I don't think it can be beaten in terms of value for money. The build was simple and everything went together perfectly. It's a very well thought out design and has excellent flying characteristics. Admittedly, I haven't performed any significant crash testing, but so far everything is holding up well. Highly recommended!
My setup: Multistar Elite motors, Afro 12amp ESC's, Naze32 controller, 5x3 props.

  1. 1
  2. 2
Customer files
No File Name Download [932]
Dart250 manual p1-2 Download [1996]
Dart250 manual p3-4 Download [2287]
No File Name Download [413]
Finished build Download [692]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save