Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Durafly™ Messerschmitt Bf.109E-4 Desert Scheme 1100mm (43.3”) (PNF)

Generating Links

Durafly™ Messerschmitt Bf.109E-4 Desert Scheme 1100mm (43.3”) (PNF)

Preis:

Now save speichern 28,95 € 28,95 €

Special Price 164,06 € 164,06 €

You save speichern 28,95 € 28,95 €

Was  193,01 €

Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
9499000189-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

The Messerschmitt Bf-109e was the backbone of the Luftwaffe fighter force during World War 2 and one of the most iconic aircraft of the period. It was one of the most advanced fighters of its day and a powerful piece of hardware for the German military war machine. Durafly has accurately reproduced the plane in two stunning schemes. One based on the 1940 Battle of Britain with the menacing "Yellow nose" and the other a 1941 tropical camouflage used in the desert campaign.

Originally designed by Willy Messerschmitt in the mid-1930s the Germans constructed over 33,000 Bf-109’s between 1939 – 1945 and they were flown in many theatres of operation. The Bf-109e was a fierce adversary for allied fighters such as the Hawker Hurricane and the legendary Supermarine Spitfire. With its lightweight design, retractable landing gear, destructive 20mm cannons, powerful Daimler-Benz liquid-cooled fuel-injected inverted V12 the Bf-109e would have made the Luftwaffe pilot feel nearly invincible.

Durafly’s 1100mm Messerschmitt Bf-109e is a fantastic scale rendition of the famous Luftwaffe fighter. The Durafly team has worked extremely hard to bring you the Bf-109e which is undoubtedly the best looking RC Bf-109e ever made. The Durafly Bf-109e has a modest 1100mm wingspan, scale electronic retracting landing gear, scale flaps, and a powerful brushless outrunner motor spinning a three-bladed scale propeller. Power is provided by an AeroStar 3736-770KV motor, AeroStar 50A ESC and when combined with a 2200mAh 4S Lipo battery this gives an outstanding performance to this agile WW2 fighter. There is even a fully functional bomb drop system complete with a scale bomb.

Willy's masterpiece is a perfect addition to the Durafly range and a fantastic adversary to the Durafly Spitfires.

 

Features:
• Superb handling on the ground and in the air
• Wide flight envelope with stable and scale flight performance
• Smoothest EPO on the market
• High scale fidelity and detail. Most scale foam Bf.109 ever produced
• Water-based, durable, and authentically color matched paint
• Superior vinyl material decals with multiple scheme options
• Scale working bomb drop system included
• Extensive use of glass and carbon fibers for low weight/high strength
• Plug and Fly, simply add Rx and Lipoly battery
• Quick assembly
• Pre-installed scale electric retracts
• Functioning scale flaps
• Operating pre-installed navigation LED lighting

 

Specs:
Wingspan: 1100mm (43.3”)
Flying Weight: 1300~1400g
Motor: Aerostar 3736-770KV
ESC: Aerostar 50A
Propeller: 11.5x8 3-Blade
Servo: 7x9g, 2xAilerons, 2xFlap, Elevator, Rudder, Bomb Release
Battery: 2200mAh 4S LiPo (not supplied)

 

Requires:
6~9 Channel TX/RX
2200mAh 4S LiPo Battery
Battery Charger

  • IC / 2: Elec Electric
  • Motorgrösse ( diam -or- cc) 3736.00
  • Spannweite (mm) 1100.00
  • Durafly™ Messerschmitt Bf.109E-4 - HobbyKing Product Profile
  • Durafly™ Messerschmitt Bf.109E-4 - HobbyKing Product Video
Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

Jim | Verifizierter Käufer

  • Overall
  • Quality
  • Value

not happy Jan.

Oct 31, 2021

wow... good looking but thats where is finished. motor was partly seized, removed striped and cleaned the extra glue from it, then one UC mounting block was loose removed and re glued that, setting up the flaps and had so much freeplay in the horn it was going to flutter, break glue to get the servo arm out. the one of the servo arms were in the wrong position no vertical for the ailerons. remove that one. threads striped in the servo shaft. fit a bigger screw, Ok shes ready.
1st flight 2.2A 4 cell did a full ground run and could smell a electrical burn ok prob the motor windings getting a bit warm from full power. back off its ok. started the roll out only to see smoke from the motor then it locked up with more fancy smoke.....
whats happend the the quality control? is that why they were on special. what a waste of money.

David | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Great Flyer

Oct 23, 2021

First 2 flights were uneventful after reading about torque roll/yaw on takeoff. Feeding the power in slowly, a bit of throttle to rudder mix, and it gets airborne without much drama. Only a little trimming required and very little effect from flaps. Only flying 3S ATM which is nice & scale, but would be better on 4. Post-flight, gear legs needed grubscrews re-tightened & Locitited in. Put better non-slip material in the battery tray. Overall really pleased - super scale looking and flys very nicely

David | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Great value with discounted price & voucher

Oct 20, 2021

Yet to fly, but certainly a great looking model. All servos/retracts working well. Couple of disappointments are the misaligned tailwheel (easily fixed) and the poor sand filter extension moulding, otherwise the fit and finish is very nice. Nice big battery/receiver compartment and easy to balance with the recommended battery. Some errors in the downloaded instructions - decals are all one type as are the wing bolts

Raymondo | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Messerschmitt

Feb 15, 2021

Easy build and looks great very well made not had time to fly yet due to lockdown.

Carl | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Love This Plane

Jan 18, 2021

One of my favorite planes. Details are outstanding and the features and assembly are top notch

Bertrand | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Superbe mais qualité moy

Nov 11, 2020

Vol bien mais servis de qualités médiocre plastique

Bertrand | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Beau mais fragile

Nov 11, 2020

Beau mais Difficile a atterrir
Servo cheap

Ruben | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Bom produto

Jul 23, 2020

Bom produto. Estou muito satisfeito com o preço e a qualidade.

Blue | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Another well designed and detailed Durafly model.

Jun 18, 2020

Excellent attention to scale detail with good in air performance.

Phil | Verifizierter Käufer

  • Overall
  • Quality
  • Value

very well made and scale looking model

Jun 16, 2020

my only complaint with this model is the servo units , the servos used are in my opinion of poor quality , the elevator servo in the model I purchased burnt itself out while I was setting the travels , fortunately on the work bench and not in flight . I have replaced both the elevator and rudder servos with better quality metal gear units . I would rather pay a little extra to have good quality electronic components , especially for the control surfaces , if the elevator servo had failed during flight it would have been game over . The retractable undercarriage not only looks good but works very well , and the bomb drop mechanism also works very well and adds to the overall scale look of the model , as do the 3 position flaps , over all I'm very happy with it , apart from the poor quality servos , hopefully DuraFly will use better quality units in future ? just a suggestion

  1. 1
  2. 2
  3. 3
  4. 4
Kundendateien
bf109 manual V1.1.pdf Download [1]
Sandfilter 3d printed Download [309]
Sandfilter 3d printed Download [249]
Nomenclature Download [100]
Nomenclature Download [100]
glue inside motor and some plastic parts no quality control Download [647]
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!

Related Tags

Zubehör