Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren

Diamant-DA-40 Sport-Skala Flugzeug 1320mm (ARF)

Diamant-DA-40 Sport-Skala Flugzeug 1320mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
2100 g
SKU:
234000001-0

Combine

essential items and
esc
battery
servo
motor
acc
Product
Description

Der DA-40 ist ein viersitziges, Tiefdecker Cantilever Eindecker, die eine feste Dreirad Fahrwerk und ein T-Leitwerk hat. in erster Linie als Schulflugzeug der DA-40 ist bekannt für seine gutartige Handhabung bei niedrigen Geschwindigkeiten und seiner kurzen Start- und Landeeigenschaften entwickelt. Der DA-40 erfolgreich seinen Erstflug am 5. November 1997.

Diese brillante Sportmaßstabgetreues Modell ist perfekt für den Anfänger als auch erfahrene Piloten gleichermaßen. Mit ihm hohen Maßstab Detail ist, erkennen die meisten nicht, dass es ein Schaummodell auf den ersten Blick ist! mit seinem lenkbaren Bugrad, geformte Radschuhe, Cockpithaube, Pilot und Beifahrersitze klappbar, dieses Modell hat sie alle! Hergestellt aus ultra-haltbare EPO-Schaum mit leichtem Sperrholz Former kann dieses Modell leicht weniger Griff als perfekte Landungen ohne zu viel Schaden zu tun, macht dies es ideal für weniger erfahrene Piloten für ein Sport-Modell im Maßstab suchen zu fliegen.

Der DA-40 Flugzeug kommt als fast bereit zu fliegen und erfordert 4 Servos (3x9g, 1x5g), 30A ESC, 28mm 1000-1500kv Brushless Outrunner Motor, 11.1v 2200mAh 20 ~ 30c Lipo und Ihren eigenen Sender und Empfänger. Das Hardware-Paket enthält alle Betriebs- und Geschäftsausstattung zusammen mit einem Schlauch aus Schaumstoff sicher Leim. Alle Servoverlängerungskabel / Y-Leitungen sind bereits vorinstalliert, so wird es keine Notwendigkeit für größere Veränderungen vorgenommen werden, wenn die Zelle der Montage.

Eigenschaften:
• Ultra dauerhaft EPO-Schaum und ein geringes Gewicht Sperrholzkonstruktion
• Große Skala Funktionen und Detail
• Tricycle Stil Fahrwerk
• Steuerbare Bugrad und geformte Radschuhe
• Abnehmbare Flügel
• Einfache Montage
• Vorinstallierte Servoverlängerungskabel / Y-Leitungen
• Armaturen / Armaturen und Schaum sicher Kleber enthalten

Specs:
Spannweite: 1320mm
Länge: 930mm
Gewicht: 570g (Zelle nur)
ESC: 30A Brushless
Motor: 28mm 1000 ~ 1500kv Brushless Outrunner
Servos: 3 x 9g, 1 x 5 g Micro - Servos

Benötigt:
30A Brushless Regler
28mm 1000 ~ 1500kv Brushless Outrunner
3 x 9g, 1 x 5 g Micro-Servos
11.1v 2200mAh 20 ~ 30c Lipo-Akku
4 ~ 6-Kanal-Sender und Empfänger

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    234000001-0
  • Brand:
    Nein
  • Kapazität ( mAh)
    Nein
  • Gewicht ( g)
    2100.00
  • Länge:
    900.00
  • Breite:
    210.00
  • Höhe
    210.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Received Airplane missing right side wheel spats. This was done deliberately because the whole landing gear was packed and taped in protective foam, so it was a deliberately sent out that way.
Plane flys great, I have 4S funfighter motor installed with 8X3.8 prop and 1000mah 4s battery. No trim issues. Stall is gentle and landing easy. But will will go into a stall spin if your don't apply power and the spin is bad!
I added flaps and the make landings and take offs very nice.
4 crowns only because of bad Quality Control, otherwise this is a 5 overall.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Plane arrived no damages to foam, better quality than I expected, Huge cabin area! it looks like a tadpole *-) seems all the pieces are there, after assembly and maiden I will add to this review, but looks better than the pictures displayed of it!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello friends
After hitting the plane you report in detail
1 there is a defect in the front of the plane must provide the engine forward slightly (see attachments)
2 front wheel change the direction should be installed well
3 position battery and control is not clear from the factory and is clear in the catalog (see attachments) cant fined CG
4 landing too fast must activate flaps to reduce speed when landing
In general plane is beautiful and graceful and gorgeous Air Sports

Use the plane in 2200ma
prop 8x 4.4 or 8x6 good
motor 2826 1400 or 1100
Speed 30a
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I purchased this model not to long ago.
it's a great plane to fly and a great looker
too. i never used the decals so i wouldn't
know if they are any good. I painted it myself.
tinted the windows, and painted the bottom black
and the top blue. my setup was a park 450 1200kv,
plush 30a ESC, orange Rx, Parkzone, Flyzone, and E-Flite
servos, MA 3 Blade 9x7 prop and 1.75 3 blade spinner.
flies great. flaps were very easy to add. fun plane to fly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
So far this is a build review only. First impressions on opening box were good. Well packed and arrived safely.

On sorting out parts discovered one wing bolt was not threaded, one nut missing from control connector and the heads on the screws for attaching motor were too large to fit next to motor body.

Had to add 2 x 3mm ply in front of firewall to move motor forward so prop cleared cowl.

Added small length of tubing for nose wheel pushrod to run in to stop flexing.

Plane went together reasonably easy. Spent time on positioning r/x, esc and battery.

Biggest hassle was applying the decals. Decals for wings were too large. Trouble getting edges to stay down especially where cuts were made for control surfaces. One of the fuselage decals came apart when applying it. Printed area came away from the adhesive back. The cream/gray decal for over canopy was a disaster. Discarded that piece.

Motor installed is a Turnigy 2217/1050, 9x7 3 blade prop., 30 amp Plush esc, 2 x TS9 servos, 2 HXT 900 and 1 Turnigy 1600 for elevator. Orange r/x and model balanced as indicated with a Zippy Compact 1800 3S, 25C lipo. Will submit further report after test flight.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
servo
motor
acc

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.