Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Entdeckung (blau) Balsa Hallo-Wing Trainer GP / EP 1620mm (ARF)

Entdeckung (blau) Balsa Hallo-Wing Trainer GP / EP 1620mm (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
4370000011-0
WANT FREE SHIPPING? Click here to find out more!
Größe zählt, egal was sie sagen ..... und das gilt auch für Trainer! Die Entdeckung passt sehr gut in die "Club" Trainer catagory und Zecken die richtigen Boxen in Bezug auf gutes Aussehen, Funktionalität und Haltbarkeit.

Der Baubeginn ist für traditionelle halbschaligen Licht-lagig / Balsa, die eine Kombination aus geringem Gewicht und hoher Festigkeit bietet. Die fachmännisch angewandt, glänzend und leicht zu Abwischen Abdeckung ist in einem attraktiven Farbschema gedruckt, das zur Orientierung ideal. Die Entdeckung ist mit einer sehr umfassenden, gute Qualität Hardware-Kit geliefert, die ein Kraftstofftank & Motorlager für diejenigen umfasst wollen Sie für Verbrenner zu gehen und auch eine Lage Motor für diejenigen montieren wollen Elektro zu gehen, enthält die Hardware-Kit auch eine Legierung Spinner & eloxiert, schwere Gabel und Gestängen etc. die Entdeckung ist sehr praktisch und verfügt über einen 2pc Flügel für den einfachen Transport und Montage vor sowie einen Bolzen auf Leitwerk, das Modell verfügt auch über einen Schnellverschluss Batteriedeckel mit Lüftungsöffnungen, Dreirad Unterwagen für hervorragende Bodenabfertigung, das tragen Hartgummireifen und natürlich eine lenkbare Bugrad.

Jeder erfahrene Pilot wird Ihnen sagen, dass je größer sie sind, desto besser können sie fliegen, das ist, warum dies der perfekte Club-Trainer Größe ist, die Entdeckung managable ist sowohl in Bezug auf den Transport und auf dem Flugplatz, kann etwas Wind Griff, fliegt langsam und vorhersagbar genug Vertrauen zu erwecken, billig zu montieren ist und eine schnelle Build Balsa ARF ist, gibt die Hornet das neue Pilot ein Gefühl der Zufriedenheit und das Vertrauen, das nur aus "Gebäude" zu kommen und ein neues Modell dieser Größe und Art der Einrichtung. Es gibt viel für den Start der Hobby-Flug von einem eher traditionellen Weg gesagt werden, und der gut aussehende Entdeckung ein Modell ist jedes RC Pilot wäre stolz zu besitzen!

Eigenschaften:
• Excellent "Club" size Trainer
• Leichtbau
• Attraktive gedruckt, das Abdecken eignet sich hervorragend für Orientierung und ist leicht zu reinigen
• Schnelle Montage am
• Bild-Handbuch inklusive
• Umfassende Hardware-Kit inklusive
• Glow oder Electric Power
• Schnell, einfach & Cheap Bauen
• 2pc Flügel für den einfachen Transport

Specs:
Spannweite: 1620mm
Länge: 1250 mm
Flügelfläche: 45dm2
Gewicht: 2200g ~ 2500G

Benötigt:
4 ~ 6-Kanal-Sender und Empfänger
5 x Std Servo (4 x für EP-Version)
0,46 ~ 0,52 Zweitakt Glow Motor
42mm Motor 650kv (EP Version)
3300mAh ~ 4000mAh 4s Lipo Akku (EP Version)
60A ~ 70A OPTO ESC (EP Version)
RX-Batterie
RX Ein / Aus-Schalter
UBEC / Regler ggf. (Lipo RX Batterie)
  • Artikelbezeichnung 4370000011-0
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 4922.0000
  • Länge 1210.00
  • Breite 230.00
  • Höhe 410.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great Plane, easy build. and easy access.

I used the top covering to install RX and Gas motor battery switch. Also replaced the nose wheel searing arm. it was spot welded not the best quality but overall 5 star rating

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great Plane, easy build. and easy access.

I used the top covering to install RX and Gas motor battery switch. Also replaced the nose wheel searing arm. it was spot welded not the best quality but overall 5 star rating

It is a well constructed plane. All parts arrived.
After assembly, the plane was able to fly with few adjustments.
For the price, it is a good looking and well flying plane.
I am flying it in Ep mode without problems.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It is a well constructed plane. All parts arrived.
After assembly, the plane was able to fly with few adjustments.
For the price, it is a good looking and well flying plane.
I am flying it in Ep mode without problems.

I wrote a very length review but it didn't save for some reason so you'll get the condensed version now. I've built many foam planes but this was my first balsa build and first balsa plane!



The packaging was perfect. Everything was protected and in the box. I went with the EP version and used a 46 size suppo motor with a 100amp dlux ESC and Turnigy mAh 4S 20C lipo. I used the HXT 6.9kg twin bearing digital servos. I get between 10-13 minutes of flight before a cell hits 3.8 volts. With this seup I have more than enough power. I could go straight vertical without a problem.



Building the plane was quite easy and took somewhere between 2 and 3 hours. I did run into some difficulties which may be because I'm new to this or maybe build quality. One of the servo screw holes in the wing (aileron) missed the balsa backing. I used CA and glued a little additional balsa so the screw could catch. Another issue was running the steerable front wheel to the rudder servo. This was a bit difficult because I had to run it under the battery tray holder and at a 45ish degree angle up to the rudder. If the servo tray was a little lower I think it wouldn't cause so much stress on the servo. The engine mount was also a big pain. I'm not sure if it's a common problem with this type of mount but I had to use 12 to 16 screws to attach my motor to the plane. My motor mount was almost too big for the wooden firewall extension provided and I had to create some new holes.



When I

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I wrote a very length review but it didn't save for some reason so you'll get the condensed version now. I've built many foam planes but this was my first balsa build and first balsa plane!



The packaging was perfect. Everything was protected and in the box. I went with the EP version and used a 46 size suppo motor with a 100amp dlux ESC and Turnigy mAh 4S 20C lipo. I used the HXT 6.9kg twin bearing digital servos. I get between 10-13 minutes of flight before a cell hits 3.8 volts. With this seup I have more than enough power. I could go straight vertical without a problem.



Building the plane was quite easy and took somewhere between 2 and 3 hours. I did run into some difficulties which may be because I'm new to this or maybe build quality. One of the servo screw holes in the wing (aileron) missed the balsa backing. I used CA and glued a little additional balsa so the screw could catch. Another issue was running the steerable front wheel to the rudder servo. This was a bit difficult because I had to run it under the battery tray holder and at a 45ish degree angle up to the rudder. If the servo tray was a little lower I think it wouldn't cause so much stress on the servo. The engine mount was also a big pain. I'm not sure if it's a common problem with this type of mount but I had to use 12 to 16 screws to attach my motor to the plane. My motor mount was almost too big for the wooden firewall extension provided and I had to create some new holes.



When I

This plane appeared to be very cheaply made at first, and the vertical fin, which was glued on in the box, broke off while unpacking the box. I am a beginner, but putting this plane together went fast and was easy. It flew better and lasted longer than all trainers I have crashed previously. The main landing gear was especially robust with rubber shocked mounts. Would recommend highly to all beginners.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This plane appeared to be very cheaply made at first, and the vertical fin, which was glued on in the box, broke off while unpacking the box. I am a beginner, but putting this plane together went fast and was easy. It flew better and lasted longer than all trainers I have crashed previously. The main landing gear was especially robust with rubber shocked mounts. Would recommend highly to all beginners.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save