Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

DIY Universal-Fahrwerk Set

DIY Universal-Fahrwerk Set

Shipped From:
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

2,07 €
Status:
Backorder
SKU:
450000020-0
WANT FREE SHIPPING? Click here to find out more!

DIY Universal-Fahrwerk-Set, ideal für Multi-Rotoren oder Helis oder sogar ein FPV stehen? Das Set kommt auch mit Befestigungsteilen.

Specs:
Länge: 210 mm
Breite: 140 mm
Gewicht: 22g Mit Hardware

  • Artikelbezeichnung 450000020-0
  • Brand Unknown
  • Kapazität ( mAh) -
  • Gewicht 30.0000
  • Länge 230.00
  • Breite 20.00
  • Höhe 70.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I put these on my 450 heli because of the larger base its more stable on take off and landing How ever you need to put elastic bands on each leg so when you have a hard landing you will not break them fore they are a bit soft.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I put these on my 450 heli because of the larger base its more stable on take off and landing How ever you need to put elastic bands on each leg so when you have a hard landing you will not break them fore they are a bit soft.

ordered to 250mm copter, were too big

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ordered to 250mm copter, were too big

A cheap light set of landing skids that'll break on your first mildly rough landing in grass. Unless your craft is very light light (under 300g) I would not recommend them. You are much better off spending more money on something that'll be stronger.
... they are very cheap though.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A cheap light set of landing skids that'll break on your first mildly rough landing in grass. Unless your craft is very light light (under 300g) I would not recommend them. You are much better off spending more money on something that'll be stronger.
... they are very cheap though.

broke my previous one in a soft crash. too flexible, i tie the bottom two parts together with string to help to stiffen it up but now i worry that it'll just help the breakage if there's impact again. would appreciate say the 450 skids to come back in stock, at least those are metal

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

broke my previous one in a soft crash. too flexible, i tie the bottom two parts together with string to help to stiffen it up but now i worry that it'll just help the breakage if there's impact again. would appreciate say the 450 skids to come back in stock, at least those are metal

Ground clearance is 56mm not enough for a GoPro but perfect for my mobius. Legs are aly and 5.7mm OD. Hole spacing as shipped is 37mm. Some people are commenting on how flimsy it is and yes it's only designed for light 'copters as the plastic supports start to splay with any weight above 500g but if you stiffen it up with zip tie cross bracing it will double that loading limit easily

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ground clearance is 56mm not enough for a GoPro but perfect for my mobius. Legs are aly and 5.7mm OD. Hole spacing as shipped is 37mm. Some people are commenting on how flimsy it is and yes it's only designed for light 'copters as the plastic supports start to splay with any weight above 500g but if you stiffen it up with zip tie cross bracing it will double that loading limit easily

Nice and cheap , could have come with some rubber endcaps tho.

Perfect to use it with rototbits centerplate to save some weight !!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice and cheap , could have come with some rubber endcaps tho.

Perfect to use it with rototbits centerplate to save some weight !!

Maybe it would work for lightweigth copters contolled by profesionals. Broke mine within first flight. Yet the anodised tubes are reusable, I'm planing to make new parts from aliuminum to replace the plastic parts.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Maybe it would work for lightweigth copters contolled by profesionals. Broke mine within first flight. Yet the anodised tubes are reusable, I'm planing to make new parts from aliuminum to replace the plastic parts.

Not use pu to1 kg , not for gopro which case

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not use pu to1 kg , not for gopro which case

The arms are molded using ABS or similar. Pipes are anodized aluminum tubes ~5.5mm. I bought this product for a quadcopter build but was disappointed. It is way too flimsy. It might be usable for a helicopter or multicopter weighing 500 grams or less or for a display model but would be crushed by anything heavier.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The arms are molded using ABS or similar. Pipes are anodized aluminum tubes ~5.5mm. I bought this product for a quadcopter build but was disappointed. It is way too flimsy. It might be usable for a helicopter or multicopter weighing 500 grams or less or for a display model but would be crushed by anything heavier.

Finger weg, dnnes Plastik, vielleicht geeignet fr Quads leichter 700gr, aber kann bei einer harten Landung mal grad so gut wie keine Energie aufnehmen, das schlgt durch.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Finger weg, dnnes Plastik, vielleicht geeignet fr Quads leichter 700gr, aber kann bei einer harten Landung mal grad so gut wie keine Energie aufnehmen, das schlgt durch.

  1. 1
  2. 2
Customer files
Mod to hold 3kg! Download [2641]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!