Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Durafly Curtiss P-40N Warhawk 1100mm (PNF)

Generating Links

Durafly Curtiss P-40N Warhawk 1100mm (PNF)

Preis:

Now save speichern 0,00 € 0,00 €

163,10 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
9306000180-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

Die Curtiss P-40 war eines der am häufigsten verwendeten Kämpfer des 2. Weltkrieges mehr Kampf in mehr Theater zu sehen global als jeder andere Kämpfer von beiden Seiten des Konflikts. Die spätere 'N' Modell wurde von den Piloten als die beste Version des vielseitigen Flugzeug zu sein und als Durafly Sehen macht die besten EPO Warbirds gibt, was als ein P-40N von Durafly besser sein könnte.

Die Durafly P-40N fängt schön die klassischen Linien dieses beliebten Kämpfer (wenn auch oft über beschattet), und mit den mehreren nationalen Markierungen in das entsprechende Feld ein, es ist eine Hommage an die vielen Flieger der vielen Nationen, unter denen sie gedient wacker in WW2. Das P-40N setzt einen neuen Standard für Durafly sowohl in Bezug auf die Oberfläche auf dem Boden nahe, und wirklich wie die Leistung in der Luft Warbird. Mit einer ganzen Reihe von einzigartigen Eigenschaften, die 100-Grad-Metallzapfen drehen und wenden umfassen zieht für felsenfeste Bodenabfertigung, super glatte Farbe und Oberfläche mit feinen Skala Flachpaneelanlagen, und zum ersten Mal mit einem Durafly 1100mm warbird, einen Antriebsstrang geeignet für beide 3 und 4S set-up ohne Änderungen erforderlich.

Die P-40N kommt mit allen Elektronik vorinstalliert bereit, die Wahl der 7-Kanal-Receiver anschließen. Eine minimale Teileanzahl ermöglicht Montage in wenigen Schritten abgeschlossen werden. Das geformte EPO Zelle hat eine sehr detaillierte Oberflächenbeschaffenheit außen, Carbonverstärkung innen und verfügt über eine Farbe Hartplastik Bauch Kufe abgestimmt. Es hat auch einen guten Zugang zu allen Elektronik über die Batterie / Kabinenhaube, eine hervorragende Kühlung im ganzen und natürlich ein sehr echt aussehende Schema. Die Qualität ist auf jeden Fall der Name des Spiels hier.

Die P-40N fühlt sich näher echten Warbird als jedes andere Modell im Durafly Bereich zu fliegen, und das ist eine gute Sache! Mit seiner überdurchschnittlich hohen Niveau der Verstärkung im Flügel (wegen Flügel und einfahren Geometrie) der P-40N ist die schwerste einmotorige Warbirds so weit von Durafly. Doch eine gut gestaltete Flügel und eine optimale Leistungssystem sicherzustellen, dass die P-40N unsere schönsten und realistisch fliegen Warbird noch ist. Ein 2200mAh 65C 3S Lipo geben gut aus und heraus Skala Leistung, aber ein 2200mAh 25C 4S Pack wirklich dieses Modell für den Sport und Kunstflug zum Leben erwecken!

Durafly ist stolz, Ihnen diesen P-40N Warhawk zu bringen, und wir sind zuversichtlich, dass Sie diesen Stolz teilen werden beide auf dem Boden, und in der Luft.


Eigenschaften:
• Ultra feine Oberflächengüte und Detail
• 100 Grad drehen und wenden zieht sich zurück Metallzapfen und Maßstab Fahrwerksklappen
• Elektromagnetische Bombe Drop-System
• Detaillierte Kunststoff geteilte Klappen
• Hohe Vormontage und minimalen Teilezahl
• Robuste EPO-Konstruktion mit umfangreichen Carbonverstärkung
• 3 oder 4-Zellen-Set-up aus der Box
• 5 authentischen nationalen Markierungen Abziehbild-Sets zur Auswahl
• Authentische und neu aufgetragen Abziehbildern und Lackierung

Specs:
Spannweite: 1100 mm (43,3 ")
Fluggewicht: 1300-1400g (45-49oz)
ESC: Durafly 45A Brushless Regler
Motor: Durafly 3536 900kv Kundschafterschulterstücke
Prop: 10x5 3 Blatt
Servos: 7x 9g (2 Aileron, 2 Flap, Aufzug, Ruder, Bombe)
Kontrollen: 6-7ch erforderlich (7 falls enthalten Bombe Drop)
Fährt: Servoless Twist & Turn, Metall Trunnion, 100 Grad

Erforderlich:
2200mah 3S 65C oder 2200mAh 4S 25-35C LiPo Akku
6-7-Kanal Sender und Empfänger

  • IC / 2: Elec Electric
  • Spannweite (mm) 1100.00
  • Durafly Curtiss P-40N Warhawk 1100mm
Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

FrançoisV | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Good value for price

Oct 26, 2017

This is not a beginner aircraft !
I already flown on F4U corsair, FW190A and this one is more difficult to fly (especially for take off and landing).
The plane is beautifuly finish and have nice fly performance. In 4s it's better for me. I also recommend to fly with 2800mAh battery, the 2200mAh is not enough...
The landing gear are really fragile.... I modify them by mounting a 4mm oleo structure. For that point I put 4 stars on quality.

FrançoisV | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Good value for price

Oct 26, 2017

This is not a beginner aircraft !
I already flown on F4U corsair, FW190A and this one is more difficult to fly (especially for take off and landing).
The plane is beautifuly finish and have nice fly performance. In 4s it's better for me. I also recommend to fly with 2800mAh battery, the 2200mAh is not enough...
The landing gear are really fragile.... I modify them by mounting a 4mm oleo structure. For that point I put 4 stars on quality.

FrançoisV | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Good value for price

Oct 26, 2017

This is not a beginner aircraft !
I already flown on F4U corsair, FW190A and this one is more difficult to fly (especially for take off and landing).
The plane is beautifuly finish and have nice fly performance. In 4s it's better for me. I also recommend to fly with 2800mAh battery, the 2200mAh is not enough...
The landing gear are really fragile.... I modify them by mounting a 4mm oleo structure. For that point I put 4 stars on quality.

FrançoisV | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Good value for price

Oct 26, 2017

This is not a beginner aircraft !
I already flown on F4U corsair, FW190A and this one is more difficult to fly (especially for take off and landing).
The plane is beautifuly finish and have nice fly performance. In 4s it's better for me. I also recommend to fly with 2800mAh battery, the 2200mAh is not enough...
The landing gear are really fragile.... I modify them by mounting a 4mm oleo structure. For that point I put 4 stars on quality.

FrançoisV | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Good value for price

Oct 26, 2017

This is not a beginner aircraft !
I already flown on F4U corsair, FW190A and this one is more difficult to fly (especially for take off and landing).
The plane is beautifuly finish and have nice fly performance. In 4s it's better for me. I also recommend to fly with 2800mAh battery, the 2200mAh is not enough...
The landing gear are really fragile.... I modify them by mounting a 4mm oleo structure. For that point I put 4 stars on quality.

FrançoisV | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Good value for price

Oct 26, 2017

This is not a beginner aircraft !
I already flown on F4U corsair, FW190A and this one is more difficult to fly (especially for take off and landing).
The plane is beautifuly finish and have nice fly performance. In 4s it's better for me. I also recommend to fly with 2800mAh battery, the 2200mAh is not enough...
The landing gear are really fragile.... I modify them by mounting a 4mm oleo structure. For that point I put 4 stars on quality.

FrançoisV | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Good value for price

Oct 26, 2017

This is not a beginner aircraft !
I already flown on F4U corsair, FW190A and this one is more difficult to fly (especially for take off and landing).
The plane is beautifuly finish and have nice fly performance. In 4s it's better for me. I also recommend to fly with 2800mAh battery, the 2200mAh is not enough...
The landing gear are really fragile.... I modify them by mounting a 4mm oleo structure. For that point I put 4 stars on quality.

Vapedaddyrc - on youtube | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Great value

Jul 16, 2017

Nice quality plane for the $$$. Finish is great, Landing retact sys is ok, shame you can not dial back the speed. one of mine is not perfectly true alignment but has not caused any issue yet. The Decals are nice, but a pain to install and they don't stay stuck. overall for what you pay you get a nice plane.

Ron | Verifizierter Käufer

  • Overall
  • Quality
  • Value

plane sucks and so does shipping costs

May 28, 2017

So far no luck with this plane. Balanced it and went out to fly. Take off resulted in hard pull to the left. got under control and it began to climb at a high rate then stalled to left again. Could not recover. Drill a tree. Put it back together and order a new fuselage. What a joke. The shipping to Alaska cost almost as much as the fuse. Two weeks to get to Alaska and the rudder was almost completely lose from the Tail. Will have to hinge it on. Flew again today and had two successfull take offs. The third a disaster. Pulled to left and cart wheeled into the ground. Will now have to use new fuse after I fix rudder. Not pleased with the plane and more than anything not happy with the shipping costs. Will not be buying anything else from Hobbyking. I can order from Motion rc and have things faster and a 1/4 or less on shipping. Good bye Hobbyking

Ian | Verifizierter Käufer

  • Overall
  • Quality
  • Value

good but some flaws

May 25, 2017

On opening the box I was very impressed. The plane looks terrific, and what a bargain! Very scale like, with flaps and electric retracts! On closer inspection the wing had a couple of small dings, but I figured I could live with that. It took a close inspection to find them.

Assembly went pretty smoothly, but at first I thought half the screws for the control horns were missing. There were only two per horn. I double checked the instructions, and they show only two screws per horn. Why supply horns with four holes if you are only going to put two screws in them? I found a pack of 2mm screws and put them in the empty holes. Probably not necessary, they seemed pretty solid with only two screws, but I had the screws and I'm a bit of a stickler for stuff like that. I don't like empty holes.

Plugged everything in for set up, and flicked the retracts up and down a few times. Who wouldn't? They worked an absolute treat. Then, one of them jammed. It just stopped working. It was up and would not come down. Didn't move at all. Didn't make any buzzing noise or anything. Zilch. Great, I have to buy another retract for it, I thought. I knew from the many posts on the net and experience of friends that Hobbyking's warranty service is rubbish, but that will have to be the subject of another rant at another time. So I jiggled wires (maybe it's just a loose plug) fiddled around, nothing. Then the other one jammed as well. Half way up this time. But at least it tried to move when I flicked the switch. Clutching at straws, I thought it might just be sticking a bit, so sprayed the general area with WD40. Incredibly, it started working properly again. Just on the off chance, I sprayed the other one with WD40 as well. A miracle occurred. It started working again. Panic over.

Next thing I had to do was change the plug on the ESC. My batteries all have Deans plugs. It was too fiddly to do it with the ESC in the plane, so with a bit of fiddling I pulled it out through the front. It isn't "mounted" in any way, it just hangs loose behind the motor. A bit odd, but okay I guess. I did notice that the wires on the motor are extremely stiff though, obviously the cheapest wire available. With the new plug firmly soldered on the ESC I attempted to get the ESC back into its spot, with the motor wires plugged in of course. During this process the plug on one of the motor wires fell off! So, out with the ESC again, and resolder the plug back onto the motor wire. I don't know what kind of solder they use but it took a lot of heat to melt it. I gave the other two plugs a good pull to see if they would come off too, but they seemed firm. Got the ESC back in and everything was looking rosy. Fitted the receiver in the recommended place without too much drama. Plugged everything in and bolted the wings on. Adjusted throws (too easy with a Taranis) and set everything up the way I like it.

Next was the decals. I've never been a huge fan of decals, but the Warhawk looked a bit bare without them, so I thought, what the heck, I'll do the American one with the skull on the nose. Great that there is a choice of decals, and no doubt some of them will find their way onto some of my other planes. But odd that the single most popular nose art on the P40, the shark's teeth, was not one of the options. If it had been there I would definitely have done it. It's by far the best looking P40 nose art imho. Prepare to spend a bit of time on this, it's a painstaking, frustrating process. If you're the least bit OCD you will hate it. Suffice to say I got there in the end, and the decals do make the plane look really good. I only put the big ones on, the small ones are far too hard to get on (who can put on a decal that's 2mm x 3mm?) and anyway you can't see them unless you get up really close.

Of course all the testing and setting up I did for the radio was done without the prop attached. I've got too many scars (and a finger that won't fold all the way) to ever do anything like that with the prop on. So, last job, on with the prop, tighten up the bold nice and tight, and... the shaft broke. The prop adaptor appears to be made out of the cheapest metal available. Well, it looks like metal, maybe it's just grey plastic. But it snapped pretty easily. Now I have to buy another one, again it's not worth hassling with Hobbyking's non existent after sales service to try and get a free one. I'd rather pay the $6.41 and just have it sent to me. Next time I will tighten it up so it's just firm, and hope that the prop stays on.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!

Related Tags

Zubehör