Land
Vereinigte Staaten
 
Shipped From:

Emax PM1806-2300Kv Brushless Multi-Rotor Motor Set (1xCW 1xCCW)

Emax PM1806-2300Kv Brushless Mul...

Die Emax Brushless-Motoren sind an der Spitze der Technologie mit dem einzigartigen Einsatz von glasfaserverstärkten Kunststoffen in der Konstruktion des Gehäuses. Dies erzeugt einen ultraleichten Motorgewicht, die noch Stärke und Haltbarkeit bei...
045000031-0

Now save Speichern 0,00 € 0,00 €

13,89 €
OUT OF STOCK
84g
045000031-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Ueberblick

Die Emax Brushless-Motoren sind an der Spitze der Technologie mit dem einzigartigen Einsatz von glasfaserverstärkten Kunststoffen in der Konstruktion des Gehäuses. Dies erzeugt einen ultraleichten Motorgewicht, die noch Stärke und Haltbarkeit beibehält. Kombinieren Sie diese mit hochwertigen Lagern und Magneten sowie zuverlässige Metallständerstrebe und Halterungen.

Jedes Set beinhaltet sowohl im Uhrzeigersinn und gegen den Uhrzeigersinn Gewinde Prop-Adapter, so dass diese ein Muss für die 250 Größe Mehr Rotoren.


Eigenschaften:
• glasfaserverstärktes Kunststoffgehäuse
• Leicht und robust
• Hochwertige Lager
• Hochwertige Magnete
• Rechts- und Linksgewinde Prop-Adapter
• Metalleinsätze zur Montage

Specs:
Polen: 9N12P
KV (RPM / V): 2300
Eingangsspannung: 2 ~ 3S (7.4 ~ 11.1V)
Max Schub: 290g
Prop Größe: 5 ~ 6 Zoll
Empfohlene ESC: 6 ~ 10amps
Gewicht: 1 9g (je)

PROP Power / PWM% Spannung (V) Strom (A) Thrust (gf) RPM
5X4.5 STD 10 11,1 0,28 10,07 2595
5X4.5 STD 25 11,1 1,45 96,79 7269
5X4.5 STD 50 11.1 3.94 209.7 10589
5X4.5 STD 75 11.1 7.91 338,61 13626
5X4.5 STD 100 11,1 9,03 363,57 14144
5X4.5 STD 10 14,8 0,32 22,12 3602
5X4.5 STD 25 14,8 2,06 151,62 9039
5X4.5 STD 50 14,8 5,61 311,08 13136
5X4.5 STD 75 14,8 11,39 473,45 16022
5X4.5 STD 100 14,8 12,37 487,52 16210

Spezifikationen

Zusätzliche Information

  • Blade- Count:
    Nicht zutreffend
  • Speed ​​( Sec / 60deg ):
    Nein
  • Drehmoment ( kg) (min. 0,01 kg )
    Nein
  • Durchmesser X (Inch )
    Nein
  • A ( mm):
    Nein
  • B (mm):
    Nein
  • C ( mm)
    Nein
  • D ( mm)
    Nein
  • E ( mm):
    Nein
  • F ( mm):
    Nein
  • Artikelnummer
    045000031-0
  • Gewicht ( g)
    84.00
  • Länge:
    90.00
  • Breite:
    40.00
  • Höhe
    55.00
  • Kv (rpm / v)
    2300.00
  • Max Currents (A):
    8.00
  • Leistung ( W):
    78.00
  • Länge B (mm)
    15.00
  • Kann Länge D (mm)
    10.00
  • Max Spannung (V):
    11.00
  • Welle A ( mm):
    5.00
  • Unit Weight (g)
    19
  • Durchmesser C (mm)
    25.00
  • Gesamtlänge E ( mm):
    0.00
  • Widerstand ( mh):
    0.00
Diskussion
Kritiken

Schreiben Sie Ihr eigenes Review

Nur registrierte Benutzer können Bewertungen schreiben. Bitte loggen Sie sich ein oder registrieren Sie sich

The motors are of very poor quality. The casing in plastic is extremely fragile and broke off after the 1st flight. The holding of the shaft broke off from the upper part.
I do not recommend this motors.
im very disapointed... very weak motors... it needs just a little hit and 10pcnt slower
for this price you can buy 2204-2300 kv motors
i do not recomend it if you are a beginner and if you are a pro/expert than you nevah' gonna buy these..... "motors"
These motors are stunning! They are 10 times better than the multistar motors, some people say they are weak and may break, I have had tens of very, very hard crashes and they work like a dream! The only disadvantage is the fact that they do scratch, not being metal, but this is nothing, doesn't effect the function, just bugs me a bit... I am using 12amp King Kong escs with 2200mah 3s 30c and a 1500mah 3s 25mah, 230 frame and the props are 5x3, although I think you can use 5x3x3 props, but i am yet to test... Btw, the bearings are fine, one was a bit stiff, but loosened up after a fly and a bit. Also use ecalc to add it up.
I purchased these to put on my HK Color 250 Frame and they are perfect. This I my first attempt at an FPV quad and these motors did not break the bank at all. I'm using them with a 4x-12A ESC and the motors have more than enough power and punch out with gemfan 5030 props. I hit a pole in my fire station and landed upside down on a concrete floor and the motors were perfectly fine... Not even a scratch. I will definitely be purchasing these again!
work very good on my 3d printed 250 quad!!!
Stay away from these, unless you never crash your multirotor!

The smallest crash will separate the motor from the base. The bearing is surrounded by a 1 mm plastic shell which joins the top of the motor to the mounting plate. The slightest impact on these will cause the top of the motor to separate, and the wires will inevitably rip out.

I broke every single one from very minor crashes. In all cases, the propellers didn't even break which shows how minor the crashes were.

If you buy these, you might as well throw your money away. HK shouldn't even stock these because of how low quality they are.
Not powergull but its cheap.. if you fly slow, there is no problem
I love this ones I ordered 4 but maybe I going to order many more
These motors are great. I purchased these for my first ever quad build. They have a uniform 16mm spacing for mounting. If you cut the wires you will have to scrape off the enamel to tin the wires with a soldering iron. They are only warm after running for almost ten minutes constant (3s) on a 250 frame with recommended props.
So far these motors have been working really well for my budget build color 250 quadcopter. Balance is good, has plenty of power and much better quality than I expected from a plastic motor.
View all reviews
Video
  • EMax Multi Rotor Plastic Motor

Upload video
Datei

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.