Registrieren

Product Finder

Einstellungen

Useful links

 
[["US","AU","GB","DE"]]
Registrieren
Shipped From:
  • USA

EP Epoxy Glider w / Motor 1410mm (Plug-and-Fly)

EP Epoxy Glider w / Motor 1410mm (Plug-and-Fly)

QTY:

Now save Speichern 0,00 € 0,00 €

156,67 €
Stock:
Gewicht:
1930 g
SKU:
189000038

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
battery
acc
Product
Description

Ein schön gebildet Epoxy-Pod und Boom Stil Segelflugzeug mit Balsa und leichte Lagen Flügel, 3 x 9g Servos für Quer- und Höhenruder Funktionen vorinstalliert, auch die vorge einschließlich installierter 28-36 1800kv NTM Prop-Antrieb Brushless Outrunner mit 20A ESC.


Die Flügel und Leitwerk sind von guter Qualität Balsa gebaut und Licht Lage, auch vor Klappflächen Steuerung kennzeichnet.

Die Hardware ist im Lieferumfang enthalten das Flugzeug in der Luft mit einem minimalen Montage zu bekommen. Es wird ein Kohlenstoff Flügelholm und Carbon-Look-Boom. Wie bei jedem richtigen Segelflugzeug, die Flügel schnelle Montage / Demontage auf dem Gebiet leicht entfernbaren Angebot ist, macht diesen Transport und Lagerung ein Kinderspiel.

Sie müssen lediglich Ihre eigenen Tx / Rx und LiPo-Akku hinzuzufügen, um das Segelflugzeug in die Luft zu bekommen.

Eigenschaften:
• Epoxy Rumpf
• Kohlefaser-Look-Boom
• Abnehmbare Flügel für den einfachen Transport
• Brushless-Motor und Klapp 9 x 6 prop w / spinner enthalten
• 3 x 9g Servo

Specs:
Spannweite: 1410mm
Länge: 704mm
Motor: 28-36 1800kv NTM Brushless Outrunner ( im Lieferumfang enthalten)
ESC: 20A
Fluggewicht: 450g


Erforderlich:
4-Kanal-Sender und Empfänger
3S 1800 ~ 2200mAh LiPo-Akku

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    189000038
  • Brand:
    Nicht zutreffend
  • Gewicht ( g)
    1930.00
  • Länge
    1030.00
  • Breite:
    160.00
  • Höhe:
    235.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
When this arrived the tail was broken off,and needs extensive repair.The elevator rod is to stiff to work and will also need attention.There is no method of attaching the canopy,just a bit of wire glued in,but that doesn't work.It was obvious the tail was broken before despatch,and the other things are just poor design and thought.Very disappointed with this product.
Quality
Value
Overall
Quality
Value
Overall
MODEL IS VERY BEAUTIFUL, BUT SOME COMMENTS, THE RED BAND IS A PAINTING AND STRIPS VERY EASILY, THE SERVANTS NOT GOOD QUALITY ARE BUT RUNNING, THE ENGINE IS STRONG AND ENOUGH TO RISE VERTICAL, ESC OF 20A heats A LITTLE, AND The HOME THE FLIGHT iS VERY sTABLE and docile, wORTH A BUY
Quality
Value
Overall
Quality
Value
Overall
I am disappointed very poor quality.
one servo does not work
a flap has a small travel
fixing the wing, impossible to assemble
empennage assembly through 3degrer
esc too small
corvering Film full of air bubble
no assembly instructions
Quality
Value
Overall
Quality
Value
Overall
I replaced the stock ESC as it was getting quite warm just sitting on the bench with the battery plugged in and replaced the stock props with 6x4 ( https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=13130 ). Assembly took one evening. Build quality is OK but the horizontal stab is a bit flimsy and slightly misaligned, the balsa construction is quite good as is the composite pod. Flies quite well and thermals nicely with a 1300mAh 3s. I will probably add rudder at some point or program in some differential aileron to correct for adverse yaw.
Quality
Value
Overall
Quality
Value
Overall
Not the best glider out there but with a lit bit of work you can actually fly it some day :)
Quality
Value
Overall
Quality
Value
Overall
Several defects found when finishing assembly. Vertical stabilizer was cracked, horizontal stabilizer was warped, elevator servo and control rod were stuck (glue in control rod line), the brown paint freely chips from mono coat, control arms for ailerons not long enough (connection touches the wings lower surface). No flights yet, seems to have more than enough power. Then the price drops a week after purchase. A file with some minimal instructions would be good (no CG info).
Quality
Value
Overall
Quality
Value
Overall
Very disappointed in this model. Quality is very poor for the following reasons:
1. Two out of the three servos were bad out of the box.
2. Tail section is glued in place approx ten degrees off. Vertical stab and horizontal stab do not align with fuselage and wings.
3. Paint chips were falling off out of the box and continue to fall off, even on the bench which I have covered with a towel. The paint definitely does not have enough elasticity properties. This thing looked like a beater plane BEFORE it was ever flown!
4. No instructions what so ever. No idea where to set throws or CG. This model takes very small throws on elevator and ailerons so be cautious. Also, there is a set screw that holds the prop on the motor shaft. You will not see this initially as you have to disassemble the prop adapter to find it.

With all the work this plane has taken on the bench to fix all the bad quality issues, I would have preferred an ARF. It would've been faster to build than to repair and I would have used better components.
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
battery
acc

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.