Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Flucht - Sport Kunstflug / Low Flügel Trainer, Balsa, glühen / EP 1580mm (ARF)

Flucht - Sport Kunstflug / Low Flügel Trainer, Balsa, glühen / EP 1580mm (ARF)

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
Gewicht:
3725 g
SKU:
437000008
WANT FREE SHIPPING? Click here to find out more!
Die Flucht ist die perfekte Folge auf Modell von einem hohen Flügel Trainer, ideal für RC-Piloten Anfänger wollen Kunstflug oder erfahrenen RC-Piloten für eine solide, zuverlässige realen Welt Sportflugzeug suchen zu erkunden, ist die Flucht auch einer jener großen Modelle, die verarbeiten kann realen Bedingungen und der realen Welt Club Flugplätze mit Leichtigkeit, ist es der perfekte "Club Feld" Größe Modell.

Die Flucht ist alles über vorhersehbare Flugeigenschaften und Kunstflug sowie Vielseitigkeit, Funktionalität und Langlebigkeit. Die mitgelieferte Hardware schöne Qualität und umfassend ist, enthält es schwere Legierung Hörner & Gabelkopf, Leichtmetallfelgen mit Gummireifen, Legierung Spinner, Tank / Motorlager, EP Motorhalterung usw. Mit der "realen Welt" Sportmodelle, praktische Anwendbarkeit ist von natürlich wichtig, verfügt über die Flucht eines 2pc Stecker in Flügel für den einfachen Transport und Montage vor Ort, einen einfachen Zugang für Batterieabdeckung und natürlich eine robuste lenkbaren Bugrad.

Neben praktischen und robust zu sein, ist es auch wichtig, natürlich, dass der Sport-Modelle sind Spaß und die Flucht sicherlich tickt die Fun-Box! Gute Kunstflugeigenschaften und solide, berechenbare Flugeigenschaften ist, was guten Sport / Tiefdecker Trainer sind alle über die Flucht bietet eine breite Flugenveloppe Anfänger suiting und erfahrene Piloten gleichermaßen, ist es kein Wunder, dass so viele Clubpiloten gehen Sie zurück zu niedrigen Flügel Sport Modelle Jahr für Jahr, wenn es für Geld zu schlagen kommt, passt nichts ein gutes Allround-Sport-Modell!
 
Eigenschaften:
Großzügige Tragflächen / Low Flächenbelastung
Robust und dennoch leicht Balsa / Sperrholzkonstruktion
Starke Tricycle Unterwagen mit Steuerbare Nosewheel
Umfassende Harware Mitgeliefert
Fachmännisch Pre-Covered, glänzend & Easy Clean Covering
Helle Schema, das für Orientierung ist gut
Einfache und schnelle Erstellen ARF
Günstige bauen
Praktische All Rounder für Piloten aller Leistungs
Perfekt 1. Sport / Kunstflugmodell
 
Specs:
Spannweite: 1580mm
Länge: 1270 mm
Flügelfläche: 44dm2
Gewicht: 2200g ~ 2400g

Benötigt:
Ihre eigene 4 ~ 6-Kanal-TX / RX
0,46 ~ 0,52 Glow Motor
42mm Brushless Outrunner Motor (EP Version)
60A ~ 80A Brushless Outrunner Motor (EP Version)
3300mAh ~ 3600mAh 4s Lipo Akku (EP Version)
5 x-Standard-Servo (4 x für EP Version)
RX-Batterie
RX Ein / Aus-Schalter

  • Artikelbezeichnung 437000008
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht ( g) 3725.00
  • Länge 1100.00
  • Breite 120.00
  • Höhe 470.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great kit for price. Quality fittings. Definitely a need to re-hinge all control surfaces as not all pins are secure. If going electric install the heaviest available in motor range and use offsets to keep motor well forward as you will still need a large battery right forward to get CofG slightly forward of main spar. I made a rounded balsa cowl to fit over top of motor bay - makes a big improvement on appearance.

I use a Zippy Compact 5S 4000mah 25C weighing in at 460 gm and built a foam lined battery tray and can slide it in via the main hatch.

Plane flies on rails and goes exactly where you point it - much easier to fly than an AXN Floater which has a mind of its own even in a slight breeze.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great kit for price. Quality fittings. Definitely a need to re-hinge all control surfaces as not all pins are secure. If going electric install the heaviest available in motor range and use offsets to keep motor well forward as you will still need a large battery right forward to get CofG slightly forward of main spar. I made a rounded balsa cowl to fit over top of motor bay - makes a big improvement on appearance.

I use a Zippy Compact 5S 4000mah 25C weighing in at 460 gm and built a foam lined battery tray and can slide it in via the main hatch.

Plane flies on rails and goes exactly where you point it - much easier to fly than an AXN Floater which has a mind of its own even in a slight breeze.

This is a very good kit for the price and is as strong as needs be for its size and weight. It features clever use of plywood and holes for strength.
It has started life as electric but I might convert to glow if a fuselage separates itself from one of my .46 motors.
They no longer pack screws for tail assembly and I wouldn't use them anyway. 15 min epoxy is far more efficient. Good quality hardware. All hinged surfaces come pre-fixed with one pin on each side of hing. I will have to remove one to ensure CA has been used as well.
4 Crowns for quality due to covering scheme not as colorful as illustration - yellow and white with red trim for mine and covering shows signs of rubbing wear in places - but not due to Hobby Kings good internal packing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a very good kit for the price and is as strong as needs be for its size and weight. It features clever use of plywood and holes for strength.
It has started life as electric but I might convert to glow if a fuselage separates itself from one of my .46 motors.
They no longer pack screws for tail assembly and I wouldn't use them anyway. 15 min epoxy is far more efficient. Good quality hardware. All hinged surfaces come pre-fixed with one pin on each side of hing. I will have to remove one to ensure CA has been used as well.
4 Crowns for quality due to covering scheme not as colorful as illustration - yellow and white with red trim for mine and covering shows signs of rubbing wear in places - but not due to Hobby Kings good internal packing.

Aeroplano muito bonito, asas removveis e material para montagem de 1, horn de metal e rodas de boa qualidade.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Aeroplano muito bonito, asas removveis e material para montagem de 1, horn de metal e rodas de boa qualidade.

First impression when I open the box was disappointed, it was easy to see the low quality. 2 screws for fixing the tail was missing, covering was damage and it was not because of transport. weels where out of center.
I was going to use a elektronic set up and it is not easy to find a place for battery.
But positive things : after building it looks much better and fly very nice.
easy to assemble actually. it is very good for the price. easy to see it when you fly and nice big wings makes it easy to fly and land.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First impression when I open the box was disappointed, it was easy to see the low quality. 2 screws for fixing the tail was missing, covering was damage and it was not because of transport. weels where out of center.
I was going to use a elektronic set up and it is not easy to find a place for battery.
But positive things : after building it looks much better and fly very nice.
easy to assemble actually. it is very good for the price. easy to see it when you fly and nice big wings makes it easy to fly and land.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save