Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Extra 330SC 1650mm 90e Klasse 3D-Scale (ARF)

Extra 330SC 1650mm 90e Klasse 3D-Scale (ARF)

Discontinued Product

Please continue searching for a similar product.
Gewicht:
6600 g
SKU:
HM-EX33090E
WANT FREE SHIPPING? Click here to find out more!

Die klassischen Skalenlinien und bewährte Fähigkeit, Extra 330SC kombinieren, um es von den meisten etablierten und beliebten Kunstflugmodelle zu machen. Der Hobbyking extra sicherlich das Teil sieht und keinen Fehler machen, ist die 3D-Fliegen, was dieses großartige Modell dreht sich alles um!

Die Qualität dieses Extra ist einfach so gut wie es geht, hat die Zelle das Fluggewicht minimal, aber stark zu halten, genug, um die Strafe von extremen Kunstflug gebaut. Die hervorragende Qualität Abdeckung wurde in einem tiefen Glanzlack fachmännisch angelegt und für den letzten Schliff, die Motorhaube, Dach und Radschuhe sind fertig. Die Hardware ist ausgezeichnet und auch Fluggewicht auf ein absolutes Minimum zu halten gewählt. The Extra 330SC verfügt auch über Stecker in Flügel & CF Flügelrohr, wie Sie für den einfachen Transport erwarten.

Der Hobbyking Extra-330SC führt jeder so gut Zoll, wie es aussieht, naturaly macht es für eine große Sportflugzeug, aber es wäre fair, dass Hardcore-3D zu sagen ist, was das extra für konzipiert wurde. Die Genauigkeit der Zelle, atemberaubendes Aussehen, obere Linie Qualität und erstaunliche Federgewicht-Spezifikationen machen die Extra-330SC eine haben Ebene für alle Kunstflug und 3D-Piloten müssen!

Eigenschaften:
Klassische Skala Aussehen
Hochwertige Konstruktion und Abdeckung
Aluminium-Wieder inforced Fahrwerk
Einfach und schnell zu bauen
Ultra-leicht, aber stark Zelle
Das herrlich angelegten, hochwertige Abdeckung
Vollschaufelblatt empenage mit Stecker in horizontaler Stabilisator
Kugelgelenk Klavierdraht Steuerstäbe & Pull / Pull-Ruder
Atemberaubende 3D-Fähigkeit
Schnelle Montage vor Ort, einfach zu transportieren

Specs:
Spannweite: 1650mm
Länge: 1636mm
Flügelfläche: 58.2dm2
Trockengewicht: 2244g (inkl alle Hardware)
Fliegen Gewicht: 3700g ~ 4000g (ca.)

Benötigt:
Ihre eigenen 4 ~ 6-Kanal-TX / RX
50mm Brushless Outrunner Motor
60A ~ 80A ESC
4 x Digital High Torque Std Servo
3300mAh ~ 4500mAh 6s Lipo Akku
75mm Spinner
UBEC

  • Artikelbezeichnung HM-EX33090E
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht ( g) 6600.00
  • Länge 1360.00
  • Breite 265.00
  • Höhe 530.00
  • Turnigy Extra 330 90E
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is a fantastic model, flies very precisely and is an equal to my Sebart Angel 50 in terms of flight performance. Very well built with suitable strengthening in the right places, the aluminium reinforcement to the undercarriage mount is a welcome feature.
My setup is a Scorpion 4025 440kV motor and Castle Talon 90 ESC, turning a 16x8 prop giving 1500W and good vertical performance. This setup is fine for sport/aerobatic flying but a bit more power would be needed for all out 3D. Servos are Hitec HS77 on aileron and elevator and HS5485 on rudder. All Up Weight with a 6s 5000mAh battery and Scorpion backup guard is just under 4kg.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a fantastic model, flies very precisely and is an equal to my Sebart Angel 50 in terms of flight performance. Very well built with suitable strengthening in the right places, the aluminium reinforcement to the undercarriage mount is a welcome feature.
My setup is a Scorpion 4025 440kV motor and Castle Talon 90 ESC, turning a 16x8 prop giving 1500W and good vertical performance. This setup is fine for sport/aerobatic flying but a bit more power would be needed for all out 3D. Servos are Hitec HS77 on aileron and elevator and HS5485 on rudder. All Up Weight with a 6s 5000mAh battery and Scorpion backup guard is just under 4kg.

Finally, the numbers:
- AUW = 3810 g
Setup:
- Ailerons : Turnigy 620 DMG HS (x2)
- Rudder : Turnigy 620 DMG HS
- Elevator : Corona DS329MG Digital (x2)
- Motor: Turnigy 5065 400kv 18x8
- ESC : HobbyWing 100 A
- Ubec
- Batteries : Zippy Compact 6S - 4500 mAh - 35 C

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Finally, the numbers:
- AUW = 3810 g
Setup:
- Ailerons : Turnigy 620 DMG HS (x2)
- Rudder : Turnigy 620 DMG HS
- Elevator : Corona DS329MG Digital (x2)
- Motor: Turnigy 5065 400kv 18x8
- ESC : HobbyWing 100 A
- Ubec
- Batteries : Zippy Compact 6S - 4500 mAh - 35 C

I have been working on it. It's nearly perfect exept mine has a bad alignment of the horizontal stab...I would say 1-2 degrees. The vertical stab seems to be OK though. Hard to leave this that way in a pattern/3D airplane...It needs a big mod. All in all it is still a very nice airframe !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have been working on it. It's nearly perfect exept mine has a bad alignment of the horizontal stab...I would say 1-2 degrees. The vertical stab seems to be OK though. Hard to leave this that way in a pattern/3D airplane...It needs a big mod. All in all it is still a very nice airframe !

Probably one of the best ARF I've ever had. The airframe is top notch quality. However, theres is no manual in mine (this is not really a problem as this ship is not for beginner).
If really you ant to search for bads I would say:
- It is not really scale (canopy is to forward compared to the real one)
- Cowl fit is not the best I've seen
The goods:
- Airframe construction is top notch (light, well built)
- Hardware is very good
- Covering is nearly perfect
- Price for that kind of aircaft
BTW you will need 5 servos (2 for elevator).
I'll post my setup and test flight as soon as I can.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Probably one of the best ARF I've ever had. The airframe is top notch quality. However, theres is no manual in mine (this is not really a problem as this ship is not for beginner).
If really you ant to search for bads I would say:
- It is not really scale (canopy is to forward compared to the real one)
- Cowl fit is not the best I've seen
The goods:
- Airframe construction is top notch (light, well built)
- Hardware is very good
- Covering is nearly perfect
- Price for that kind of aircaft
BTW you will need 5 servos (2 for elevator).
I'll post my setup and test flight as soon as I can.

Fantastic build. Simply stunning quality for the price.
MOTROLFLY DM-4325 (20mm spacers)
Turnigy dlux 120A HV
Haiyin H5000.6S.35 battery
2200 2S LiFe
4 HXT12 HXT 10kg Servo
1 POWER HD 8315TG TITANIUM ALLOY GEAR SERVO - 15 KG for Rudder
FrSky X8R receiver and Taranis Transmitter
Fabulous build. Balanced perfectly and flew on rails. Most fantastic flight ever. I will probably buy another to have in reserve just in case I mess up.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic build. Simply stunning quality for the price.
MOTROLFLY DM-4325 (20mm spacers)
Turnigy dlux 120A HV
Haiyin H5000.6S.35 battery
2200 2S LiFe
4 HXT12 HXT 10kg Servo
1 POWER HD 8315TG TITANIUM ALLOY GEAR SERVO - 15 KG for Rudder
FrSky X8R receiver and Taranis Transmitter
Fabulous build. Balanced perfectly and flew on rails. Most fantastic flight ever. I will probably buy another to have in reserve just in case I mess up.

Maidened her today. It is amaizing! Best 3D plane in this size class I've ever flown. I'm thinking of buying another one just to have it by hand in case of crash haha!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Maidened her today. It is amaizing! Best 3D plane in this size class I've ever flown. I'm thinking of buying another one just to have it by hand in case of crash haha!

So, just after she came to me I decideded to make it in electric drive. For the price and quality I love this airframe. Will see how about flight characteristics. Others claim that she flies really good. Aiming not to exceed 4kg with SK3 5055 430kv, Xoar 18x8PJN, Zippy Compact 5800/6s/25c, YEP 80, UBEC 5-7,5A Turnigy, HK47011MG on ailerons and rudder, HS-7775MG on elevators. Will post final setup after maiden and some next 10-15 flights. So far waiting for batteries and servos to arrive. Stay tuned!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

So, just after she came to me I decideded to make it in electric drive. For the price and quality I love this airframe. Will see how about flight characteristics. Others claim that she flies really good. Aiming not to exceed 4kg with SK3 5055 430kv, Xoar 18x8PJN, Zippy Compact 5800/6s/25c, YEP 80, UBEC 5-7,5A Turnigy, HK47011MG on ailerons and rudder, HS-7775MG on elevators. Will post final setup after maiden and some next 10-15 flights. So far waiting for batteries and servos to arrive. Stay tuned!

This plane is great for 3D. After 6 flights I'm very impressed and would definitely buy another. There's no knife edge coupling that I could detect. Elevator, harrier, hover, flat & wingtip spins, pop-tops etc were all very nice.

It needed more upthrust so I added 2 washers to each of the bottom motor mounts.

Here's the gear I'm using:

Motrolfly DM4325 380KV Motor (requires 20mm spacers to reach the front of the cowl),

19x8 APC prop,

YEP 100A 6S ESC,

Castle creations 20A BEC,

Turnigy nanotech 6S 5000mAh batt,

3x BMS-820DMGplusHS servo,

2x BMS-990DMG servo (elevators),

3" spinner

AUW = 4.00kg

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This plane is great for 3D. After 6 flights I'm very impressed and would definitely buy another. There's no knife edge coupling that I could detect. Elevator, harrier, hover, flat & wingtip spins, pop-tops etc were all very nice.

It needed more upthrust so I added 2 washers to each of the bottom motor mounts.

Here's the gear I'm using:

Motrolfly DM4325 380KV Motor (requires 20mm spacers to reach the front of the cowl),

19x8 APC prop,

YEP 100A 6S ESC,

Castle creations 20A BEC,

Turnigy nanotech 6S 5000mAh batt,

3x BMS-820DMGplusHS servo,

2x BMS-990DMG servo (elevators),

3" spinner

AUW = 4.00kg

This looks the goods all fits great and looks even better using 50/60 380 kv on 6s will report back after maiden

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This looks the goods all fits great and looks even better using 50/60 380 kv on 6s will report back after maiden

This is such a great plane, put cf landing gear, best plane I've had, 6 cell 20x6 better on an 8 cell same prop, 275 kv 120 Hv esvc, 2000w!! it is the pride of the hangar, got 1.3 balsa Pitt on the way

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is such a great plane, put cf landing gear, best plane I've had, 6 cell 20x6 better on an 8 cell same prop, 275 kv 120 Hv esvc, 2000w!! it is the pride of the hangar, got 1.3 balsa Pitt on the way

  1. 1
  2. 2
Customer files
My Extra just after maiden Download [563]
No File Name Download [449]
No File Name Download [608]
No File Name Download [1190]
No File Name Download [391]
Maiden Flight Download [4620]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!