Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Extra Strong Ruderhörner w / Lager 34mm (5 Stück)

Extra Strong Ruderhörner w / Lager 34mm (5 Stück)

Shipped From:
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

14,32 €
Status:
Auf Lager
SKU:
007-02206x5
WANT FREE SHIPPING? Click here to find out more!

Extra Strong Ruderhörner w / Lager 34mm (5 Stück)
diam2.8mm x 34mm

  • Artikelbezeichnung 007-02206x5
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 35.0000
  • Länge 75.00
  • Breite 12.00
  • Höhe 60.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great hardware. High quality and very nice look. You may want to cut away a piece of the plastic bulge on one side of the clevis to fit the ball bearing perfectly.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great hardware. High quality and very nice look. You may want to cut away a piece of the plastic bulge on one side of the clevis to fit the ball bearing perfectly.

These are of high quality. I found no slop in them, the bearings realy make these run smootly. The threads are metric, M3 to be exsact. Exscelent for large scale models.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are of high quality. I found no slop in them, the bearings realy make these run smootly. The threads are metric, M3 to be exsact. Exscelent for large scale models.

Price / quality ratio is very good I recommend Daniel!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Price / quality ratio is very good I recommend Daniel!!!

Good stuff for less money!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good stuff for less money!

I replaced the hardware on the UCD .60 with these and used the heavy duty servo arms from HK on the HiTec 5495 Servos. Also beefed up the pushrods with HK carbon fiber tubes glued over the rod and held in place by nylock nuts. Needless to say, no play, no flutter and solid centering. Makes for very solid 3D performance at a very very affortdable price. Way to go HK. As always the price and quality is there.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I replaced the hardware on the UCD .60 with these and used the heavy duty servo arms from HK on the HiTec 5495 Servos. Also beefed up the pushrods with HK carbon fiber tubes glued over the rod and held in place by nylock nuts. Needless to say, no play, no flutter and solid centering. Makes for very solid 3D performance at a very very affortdable price. Way to go HK. As always the price and quality is there.

Decent hardware at a decent price. The mounting scew is very long and will require trimming on most applications. This is a good thing, allowing it to be used on even the thickest of rudders, ailerons or elevators. I used a generous amount of blue locktite on both screws. They are a little less than half the price of Du Bros units, except they com with grade 8 screws that bolt thru the cone, instead of into the cone on the HK units. Would have to be used with longer heavy duty servo arms.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Decent hardware at a decent price. The mounting scew is very long and will require trimming on most applications. This is a good thing, allowing it to be used on even the thickest of rudders, ailerons or elevators. I used a generous amount of blue locktite on both screws. They are a little less than half the price of Du Bros units, except they com with grade 8 screws that bolt thru the cone, instead of into the cone on the HK units. Would have to be used with longer heavy duty servo arms.

What is the small black plastic washer like thing for?



Where does it go?



What is its function?



Lonz

============

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

What is the small black plastic washer like thing for?



Where does it go?



What is its function?



Lonz

============

excellent horns I am using these on a 6.5 kg plane with an OS 200 and they have performed without fault

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

excellent horns I am using these on a 6.5 kg plane with an OS 200 and they have performed without fault

Excelente para giants, contudo deve-se tomar o cuidado quando for fixa-lo superfcie mvel, pois somente tem um parafuso de fixao e deve-se ultilizar trava rosca de mdio torque.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excelente para giants, contudo deve-se tomar o cuidado quando for fixa-lo superfcie mvel, pois somente tem um parafuso de fixao e deve-se ultilizar trava rosca de mdio torque.

FIz uma pequena alterao mas funciona bem e aguenta bem as foras de um servo potente

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

FIz uma pequena alterao mas funciona bem e aguenta bem as foras de um servo potente

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!