Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren

F-22-Kampfflugzeug EPO 70mm EDF (ARF)

F-22-Kampfflugzeug EPO 70mm EDF (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
1679 g
SKU:
177000004

Combine

essential items and
esc
battery
servo
motor
Product
Description

Dieser Jet ist eine gute Größe und schön mit Abziehbildern alle bereits aufgetragener unter denen dieser harten EPO Jet fertig zu entsprechen sieht seine Leistung. Trotz eines ARF zu sein, das ist ein wirklich schnell zu bauen, wird der Kleber selbst geliefert!

Die im Lieferumfang enthaltene 70mm Lüfter viel Schub gibt, wenn durch die reccomended 4 Zelle aufgebaut und der Aufzug & Roll sind eine großzügige Größe zu geben hervorragende maneouverability angetrieben, ist das Endergebnis ein schnelles Modell mit einer großen Flugbereich!

Specs:
Spannweite: 693mm
Länge: 1000 mm
Fluggewicht: 900g
Flügelfläche: 15dm2
Flächenbelastung: 60 g / dm 2
4-Kanal

im Lieferumfang enthalten:
70mm Lüftereinheit (4 mm Rotor-Adapter)
Alle Hardware
Optional Feste Unterwagen
Foto Anleitung
Kleben

Erforderlich:
4 ~ 6-Kanal-TX / RX mit elevon Mixing
28mm EDF Motor mit 4 mm Welle
40 ~ 60A ESC w / BEC
2200mAh 4s Lipo Akku
4 ~ 5 9g Servo

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    177000004
  • Brand:
    Nein
  • Kapazität ( mAh)
    Nein
  • Gewicht ( g)
    1679.00
  • Länge:
    880.00
  • Breite:
    210.00
  • Höhe
    320.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

playlist_add_check Overall
trending_up Value
verified_user Quality
Ich habe bei der F22 die Tragflächen und das HWL mit Carbonflachstäben verstärkt.Die Höhenruder sind als Ailhorn ausgelegt und aus Balsa angeferteigt.Die Querruder der Fläche wurden verklebt!Eingebaut ist ein Wemotec Minifan 3W27 mit 6S.Akku ist ein 3300mah Nanotech Lipo.Regler ist ein 80A Hobbyking.Ein original Wemotecschubrohr wurde an die Impellereinheit angeflanscht.Der Schub beträgt 1800g bei einem Fluggewicht von 1200g.
Das Fahrwerk wurde natürlich entfernt.Gestartet wird aus der Hand.(dank Schmirgelpapier auf den Rumpfseiten.)Der Jet geht hammermäßig senkrecht und hat schon nach wenigen Sekunden die Sichtgrenze erreicht!Im Horizontalflug liegt die Geschwindigkeit über 200Kmh/Std.
playlist_add_check Overall
trending_up Value
verified_user Quality
verified_user Quality
trending_up Value
playlist_add_check Overall
Cheap. Well designed and easy to build. Instructions aren't great, but there are some nice vids on YT.
CoG is 120mm.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good quality mouldings and the kit goes together really well. I installed the 70mm fan and 2836-2700 motor from my crashed Durafly Vampire. Don't use the undercarrieage as it makes the plane very tail heavy and draggy, needed max throttle just to stay airborne, and the noseleg buckled on the gentlest of approaches.



Taking the u/c off made a massive improvement. Happily cruise along at half throttle on a 4s 2200 lipo. Very easy to hand-lauch too. A good model for fun-flying.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My F22 in Orange Tiger Stripe for visibility

https://www.hobbyking.com/hobbyking/store/uploads/Hobbyking_OZJUOVNOSH592016111528.jpg
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall

A very fun, light EDF with great high end speed and good low end (high alpha) characteristics. You can hover it in a good wind.

As an answer to the tail servo reversing: You don't need a reverser if you want to just put a Y cable on the left rudder/left aileron and another Y on the right rudder/right aileron. Makes a taileron kinda config but it flies very well with this setup.

My nose gear cage was waaaayyyy too big. That is the reason for the 3 crown rating on quality. Would have required major surgery. So I took off the gear and hot glued velcro straps into the hole the cage left. It holds 4s or 5s batteries but 5S makes it scream. CG was almost automatic with a 5S 2200 or a 4S 3000. With 5s and a 70 mm 3000 kv, it is as fast as a Dynam Meteor but has wonderful low speed ability. Belly landings are simple and non-traumatic. Bring it in slow and flare at the last second.

If you do the Y cable bit, set elevons as the airplane type, you can have it running in an evening or two. Very simple construction but the material seems sturdy (much sturdier than the LX F-22 material).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Wow. Always wanted to fly an F-22. If you are thinking of flying and easy edf? This is one. I put it together in one night. Was fairly simple. I made some mods for the battery and a hatch. The think flys great. It could be a step up for someone from any plane. No bad tendencies. I put a 3000kv outrunner that HK sells. And flew on a 4s pack. No trimming was needed. I love this plane and will get a bigger F-22 when I have the money. For now. I can toss this in the car, get a few flights in. And it makes my day. I own a lot of EDFs and this is the easiest, most predictable one I have. I highly recommend it to any flyer!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
with 70mm lightweight alloy 4000KV, 4s 2200-25/50C nanotech, 960watt,65A, turnigy AE-80A ESC 1,2kg thrust, 950gr total weight this thing screams like jet, accelerates like a rocket. nice fly
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought my second Jet Fighter and they just fly as good as it looks. Start it with wheels on grass. No problem. Or hold in wingtip and swing it up in the air. Flies even better without wheels. starmax quality. Use Turnigy L2855-2800 motor. Great value for the buck. Easy to fly,easy to land.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received my F-22 today and was amazed by the quality. Very well packaged with literally no hangar rash. All the parts fit together perfectly. The finish on the plane is also very nice. Not just a flat gray, it has a nice metallic finish like the real f-22. I plan on adding a metal 70mm edf and converting it to have thrust vectoring and rudder control. One of the best EDF jets I have seen at such a low price. Can't wait to get it in the air!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Love this model. Installed a WeTech fan with Het 2W18 motor. Delivers 1,3kgs of thrust. 4S Nanotech.
Considering the price you get lots of value for the "bucks". Can highly recommend the F-22 Raptor.
/Pete
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Hobbyking F-22 Raptor with CS 70mm, 12Blade EDF

  • Hobbyking F-22 Raptor with 2855, 70mm EDF, 4S

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
servo
motor

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.