Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

F86 Sabre 35mm EDF Micro Jet EPO (RTF - MODE 1)

F86 Sabre 35mm EDF Micro Jet EPO (RTF - MODE 1)

Discontinued Product

Please continue searching for a similar product.
SKU:
F86-35-RTFM1
WANT FREE SHIPPING? Click here to find out more!

Dieser winzige Sabre ist erstaunlich, EPO-Schaum mit ihm kombiniert ist im Feder Statistik bedeutet es der Quote weniger als 100% der Landung sehr nachsichtig sein. Die 35-mm-Lüftereinheit und ESC sind vorinstalliert, da die Quer- und Höhenruder Servos sind, kommt das Modell in 1 Stück so alles, was Sie tun müssen, wenn es ankommt ist, die Steuerstäbe verbinden. Die mitgelieferte 4-Kanal 2,4 GHz-Sender ist bereits gebunden an die vormontierten Mikro RX Vorbereitungszeit zu beschleunigen, wobei der Sender verfügt über Servo-Reverse und trimmt für jeden Kanal.

Die Box das Modell in ankommt ist wirklich praktisch, nicht nur dem Transport Aufhänger Ausschlag aber die Ersatz Taschen in der Verpackungsschaum sind ideal für den Transport Ersatz Lipo ist zu verhindern, und Sie werden so viel Spaß mit diesem haben, ich ein paar tragen würde! Das mitgelieferte Ladegerät wird von einem 12V-Versorgung und Ladungen durch die JST-XH Rest Blei arbeiten. Alles, was Sie jetzt brauchen, ist ein mit den Micro Mig 15 bewaffnet fliegenden Kumpel für einen Tennisplatz Dogfight!

Specs:
Spannweite: 386mm
Länge: 380 mm
Fliegen Gewicht: 100g
EDF: 35mm mit 9000kv Brushless Outrunner Motor
ESC: 6A w / BEC
Servo: 2 x 2g

Eigenschaften:
Optionale Zusatztanks
Magnetic Canopy & Fan Hatch
Vorinstallierte Ruderhörner

Eingeschlossen sind:
Anleitung
Kontrollstäbe
2,4 GHz 4-Kanal Proportional TX
4-Kanal-RX
350mAh 2s 7,4V Lipo
12v Lipo Balance Charger

Benötigt:
4 x AA Trockenbatterie

  • Artikelbezeichnung F86-35-RTFM1
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 1305.0000
  • Länge 525.00
  • Breite 150.00
  • Höhe 410.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

i have a f86 sabre 4ch transmitter that come with the plane and didnt have a bind button???? i know this is dumb but can i bind it with this micro orangerx receiver?....please help. i dont want to buy another transmitter...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i have a f86 sabre 4ch transmitter that come with the plane and didnt have a bind button???? i know this is dumb but can i bind it with this micro orangerx receiver?....please help. i dont want to buy another transmitter...

Excellent looking plane. Really good quality.

Only issue I had was that I could not get it off the ground. I had to remove the bombs at the bottom of the wings, then I was able to. But, you need to take off at 100pcnt throttle, and then give it a hard hand launch into the wind. Once you have speed and any wind, it is the only thing that will keep it in the air.

It is also a very fast plane. Not for beginners.

Had a few crashes in a park and plane held up well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent looking plane. Really good quality.

Only issue I had was that I could not get it off the ground. I had to remove the bombs at the bottom of the wings, then I was able to. But, you need to take off at 100pcnt throttle, and then give it a hard hand launch into the wind. Once you have speed and any wind, it is the only thing that will keep it in the air.

It is also a very fast plane. Not for beginners.

Had a few crashes in a park and plane held up well.

awesome little plane, but I must be doing something wrong...I'm using the Rhino 2S 360mah packs fully charged and the cog is spot on, but tossing it hard at 80pcnt-100pcnt throttle I can't seem to get it "on plane" and it aventually drops. I'm concerned about the elevator servo body, that hangs down quite a ways into the thrust tube and may be causing turbulence. At full throttle it feels like a 900 watt blow dryer, so it seems like it should fly easier...I must be overlooking something; I've tweaked all control surfaces both ways and can't seem to get the perfect "sweet spot"

Anyway, 10 stars for looks, price, and overall value...I'm looking forward to figuring it out.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

awesome little plane, but I must be doing something wrong...I'm using the Rhino 2S 360mah packs fully charged and the cog is spot on, but tossing it hard at 80pcnt-100pcnt throttle I can't seem to get it "on plane" and it aventually drops. I'm concerned about the elevator servo body, that hangs down quite a ways into the thrust tube and may be causing turbulence. At full throttle it feels like a 900 watt blow dryer, so it seems like it should fly easier...I must be overlooking something; I've tweaked all control surfaces both ways and can't seem to get the perfect "sweet spot"

Anyway, 10 stars for looks, price, and overall value...I'm looking forward to figuring it out.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save