Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren
Shipped From:
  • USA

F86 Sabre 35mm EDF Micro Jet EPO (RTF - MODE 2)

F86 Sabre 35mm EDF Micro Jet EPO (RTF - MODE 2)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
1305 g
SKU:
F86-35-RTFM2

Combine

essential items and
battery
Product
Description

Dieser winzige Sabre ist erstaunlich, EPO-Schaum mit ihm kombiniert ist im Feder Statistik bedeutet es der Quote weniger als 100% der Landung sehr nachsichtig sein. Die 35-mm-Lüftereinheit und ESC sind vorinstalliert, da die Quer- und Höhenruder Servos sind, kommt das Modell in 1 Stück so alles, was Sie tun müssen, wenn es ankommt ist, die Steuerstäbe verbinden. Die mitgelieferte 4-Kanal 2,4 GHz-Sender ist bereits gebunden an die vormontierten Mikro RX Vorbereitungszeit zu beschleunigen, wobei der Sender verfügt über Servo-Reverse und trimmt für jeden Kanal.

Die Box das Modell in ankommt ist wirklich praktisch, nicht nur dem Transport Aufhänger Ausschlag aber die Ersatz Taschen in der Verpackungsschaum sind ideal für den Transport Ersatz Lipo ist zu verhindern, und Sie werden so viel Spaß mit diesem haben, ich ein paar tragen würde! Das mitgelieferte Ladegerät wird von einem 12V-Versorgung und Ladungen durch die JST-XH Rest Blei arbeiten. Alles, was Sie jetzt brauchen, ist ein mit den Micro Mig 15 bewaffnet fliegenden Kumpel für einen Tennisplatz Dogfight!

Specs:
Spannweite: 386mm
Länge: 380 mm
Fliegen Gewicht: 100g
EDF: 35mm mit 9000kv Brushless Outrunner Motor
ESC: 6A w / BEC
Servo: 2 x 2g

Eigenschaften:
Optionale Zusatztanks
Magnetic Canopy & Fan Hatch
Vorinstallierte Ruderhörner

Eingeschlossen sind:
Anleitung
Kontrollstäbe
2,4 GHz 4-Kanal Proportional TX
4-Kanal-RX
350mAh 2s 7,4V Lipo
12v Lipo Balance Charger

Benötigt:
4 x AA Trockenbatterie

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    F86-35-RTFM2
  • Brand:
    Nicht zutreffend
  • Gewicht ( g)
    1305.00
  • Länge
    525.00
  • Breite:
    150.00
  • Höhe:
    410.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Well I paid 4 my sabre f86 wk ago it says its been shipped so I write a proper 1 then .But lost email containing tracking no anyway I can get it back all data wipes every 24hrs
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
plane stalls when doing turns ,chip connecting the motor and battery caught fire,
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got one of these, fly it every weekend, and totally love it! Even though I expect the model would fly better without them I glued the tanks on and as predicted they make good "skids" for landing on and protect the aileron servo and pushrods - I've yet to damage either. With the tanks fitted I can on a still day perform "touch and goes" with this model if the grass is really short. The best surface being an astroturf cricket pitch.



To make this already good model awesome I did the following:



I use stiffer (slightly thicker & heavier) rods to the ailerons - this improved control enourmously as the rods as supplied were flexing under load I think making the contol responses quite variable.



I put some (silver) tape on the bottom of the tanks (and aileron servo protection "bump") to make them more resilient as skids - this added very little weight. I also put some (shortened?) sewing pins into the tank pylons through the top of the wings so that it wasn't just foam attaching the tanks and taking the landing loads. This also added very little weight but made the tanks attachment much stronger. The pin heads are hardly noticeable - not "berry" sewing pins with the coloured plastic ball on the end of them.



The greatest improvement to be made is to fit a 10A ESC and a Rhino 360mAh 3S battery - it really goes with this setup! The existing ESC might have been ok on 3S but I
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a good Item,
Has fairly level flight and fly's like a high wing air craft, It is stable in the air.
Fairly quick but does loose altitude in high bank turns. slightly under powered, will not loop gets to vertical and stalls.

Elevator servo seems weak and esc power wires can get caught in Elev arm. ESC winds EDF down slowly, and beeps (1 per second) continuously when no throttle applied, useful for locating when lost, annoying when working on.

The Aileron servo is the Achilles heal of this air craft. Its location of the under the wings leads to stripped gears on belly landings on thicker grass. I upgraded to a 8G servo to fix, it still fly's but the servo arm still broke on landing. It will fly with one aileron but stripped gears on next landing.

All in all a good plane but more protection is required for Aileron servo.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
battery

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.