Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Falcon Trainer 20cc Balsa 1860mm (ARF)

Falcon Trainer 20cc Balsa 1860mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Gewicht:
6504 g
SKU:
248000006-0
WANT FREE SHIPPING? Click here to find out more!

Sie suchen einen Spaß, sparsamer Gas Flugzeug angetrieben, dass die Bank nicht brechen? Überprüfen Sie die Falcon Trainer 20CC aus. Das alles Holz hohe Flügel Trainer ist perfekt für faule Tage auf dem Flugfeld um den Himmel setzen, Benzin schlürfen, Schießen Berührung und geht, oder jemand lehren zu fliegen!

Der Falcon Trainer kommt fast bereit zu fliegen, so dass Sie nur die Endmontage ausfüllen müssen und Ihre Wahl der Ausrüstung zu installieren. Die vorgefertigten Holzkomponenten kommen dachte in einem mehrfarbigen Kunststofffolie, die haltbar ist und wird seit Jahren großartig aussehen zu kommen. Robustes Aluminiumfahrwerk absorbiert Landebelastungen und ermöglicht die Falcon Trainer rauen Pisten mit Leichtigkeit zu behandeln. Für den einfachen Transport Schrauben der Flügel einfach an Ort und Stelle. Da dies ein Spaß, Trainer langsam fliegen, werden Sie nur für jede Steuerfläche einige preiswerte Standard-Servos benötigen.

Ablaufen eine sehr häufige 20CC Gasmotor, der Falcon ist wartungsarm und kostengünstig zu betreiben. Keine Notwendigkeit, teure Nitro Kraftstoff zu laufen. Die große Flügelfläche und leichte Bauweise verleiht dem Falcon eine sehr geringe Flächenbelastung, langsame Cruisen und Landegeschwindigkeiten bedeutet. Als Trainer ist es sehr stabil und nachsichtig. Aufgrund seiner Größe ist es ideal für andere Aufgaben wie aero-Schleppen Segelflugzeuge, fallen Fallschirm Männer, Ausdauer UAV oder Luftaufnahmen zu verwenden.

Eigenschaften:
• Almost Ready to Fly - komplette Endmontage und installieren Sie Ihre Wahl der Elektronik und Energiesystem
• Erschlossen Balsa und Sperrholz Zelle
• Vibrant mehrfarbigen Folienabdeckung
• Robuste Aluminiumfahrwerk
• Komplette Hardware-Paket einschließlich der Räder und Kraftstofftank
• Bolt-on Flügel
• Leichte Flächenbelastung für langsame Cruisen und Landungen

Specs:
Spannweite: 1860mm
Länge: 1550 mm
Fluggewicht: 3900g
Flügelfläche: 62dm2

Benötigt:
4+ Kanal Sender und Empfänger
20CC Gasmotor
5 * Standard Größe Servos
Misc Bauklebstoffe

  • Artikelbezeichnung 248000006-0
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht ( g) 6504.00
  • Länge 1420.00
  • Breite 230.00
  • Höhe 430.00
  • Falcon Trainer
  • Falcon trainer + RCGF 15CC
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Bought this for a friend,who is starting with modellflying.I did not have any bigger expectaisions but this ARF is one of the best i ever built,very good passform,very nice job with the covering and really good quality on all woodparts.
Its much better then the pictures on HK webside

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought this for a friend,who is starting with modellflying.I did not have any bigger expectaisions but this ARF is one of the best i ever built,very good passform,very nice job with the covering and really good quality on all woodparts.
Its much better then the pictures on HK webside

I bought this and electrified it with an NTM 50/60 270kv, Turnigy 5000ma 6s and an 80A ESC and it pulls about 30A on a 17/10 prop. It makes a brilliant Trainer, you can put on tick over at height put full up and it won't tip stall, it just descends slowly. If you start to throw it around it will do stuff but having a flat bottomed wing it doesn't like inverted although it does inverted spins it only spiral dives the right way up. I've also towed gliders up with it. The only down side is the dihedral brace which is definitely on the fragile side as I found out when hearing a cracking noise during a manoeuvrer and discovering a split in it on landing, but to be fare for a Trainer I give it a hard time.
A Cracking Plane (hee hee).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this and electrified it with an NTM 50/60 270kv, Turnigy 5000ma 6s and an 80A ESC and it pulls about 30A on a 17/10 prop. It makes a brilliant Trainer, you can put on tick over at height put full up and it won't tip stall, it just descends slowly. If you start to throw it around it will do stuff but having a flat bottomed wing it doesn't like inverted although it does inverted spins it only spiral dives the right way up. I've also towed gliders up with it. The only down side is the dihedral brace which is definitely on the fragile side as I found out when hearing a cracking noise during a manoeuvrer and discovering a split in it on landing, but to be fare for a Trainer I give it a hard time.
A Cracking Plane (hee hee).

I bought this and it is a good deal. I like the plane. It flies great. I made mine electric. 6s lipo, 4,000 MAh. 100 amp esc no bec. and a G-46 turnigy motor. Really, only pulls 60 amps with a 14x 7 apc prop. Good vertical. nice flyer, touch n goes all day long. go pro platform too. This is a quality arf. Nice tall landing gear for those larger props. I love this plane :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this and it is a good deal. I like the plane. It flies great. I made mine electric. 6s lipo, 4,000 MAh. 100 amp esc no bec. and a G-46 turnigy motor. Really, only pulls 60 amps with a 14x 7 apc prop. Good vertical. nice flyer, touch n goes all day long. go pro platform too. This is a quality arf. Nice tall landing gear for those larger props. I love this plane :)

Dont get you hopes up too much with this model as a 20cc gasser......very similar in size to the 60 Boomerang and boomerang is of a more solid construction, the falcons fuz is about 100mm longer and slightly shorter W/S, i think the falcon is more suited to a glow or an electric set up as i believe a 20cc gasser will eventually shake it to pieces, i have built both planes and put a NGH 17 in the falcon and it does fly nice and is a real gentle flyer but had to strengthen it up in alot of places to stand the rigors of the gas engine

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Dont get you hopes up too much with this model as a 20cc gasser......very similar in size to the 60 Boomerang and boomerang is of a more solid construction, the falcons fuz is about 100mm longer and slightly shorter W/S, i think the falcon is more suited to a glow or an electric set up as i believe a 20cc gasser will eventually shake it to pieces, i have built both planes and put a NGH 17 in the falcon and it does fly nice and is a real gentle flyer but had to strengthen it up in alot of places to stand the rigors of the gas engine

Yesterday my Falcon Trainer arrived from the EU Warehouse. Although the package was a little damaged the model was ok. So nothing was broken and the model hat no dents.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Yesterday my Falcon Trainer arrived from the EU Warehouse. Although the package was a little damaged the model was ok. So nothing was broken and the model hat no dents.

Customer files
Manual Download [1169]
Falcon Trainer Electric Download [2202]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save