Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Fatshark 3-Achsen-Pan Tilt-and-Roll-Kamera-Mount-System (unterstützt von Trinity Headtracker)

Fatshark 3-Achsen-Pan Tilt-and-Roll-Kamera-Mount-System (unterstützt von Trinity Headtracker)

Shipped From:
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

46,32 €
Status:
Auf Lager
SKU:
253000033-0
WANT FREE SHIPPING? Click here to find out more!

Fatshark eingeführt hat es neue 3-Achsen-Schwenk-, Neigungs- und Roll Kamera-Mount-System mit ihren revolutionären 3-Achsen Trinity Head-Tracker zu gehen. Mit Hilfe eines High-Speed-Metallgetriebebasis (pan) Servo und 2 High-Speed ​​Tilt und Roll Servos, passt die Halterung der schnellen Bewegung Fähigkeiten des Trinity perfekt. Das System kommt mit zwei Kamerahalterungen, eine für die Fatshark 600tvl CMOS (20 mm) und einer zweiten für 25mm Kameras wie die neue Fatshark 420CCD V2.

Specs:
Größe: 68x42x31mm
Gewicht: 40g

* Hinweis: Dieses Gerät enthält nicht die Kamera.

  • Artikelbezeichnung 253000033-0
  • Brand Fatshark
  • Kapazität ( mAh) -
  • Gewicht 77.0000
  • Länge 100.00
  • Breite 45.00
  • Höhe 65.00
  • Fatshark Trinity Head Tracking Module
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Nice resolution servos. With maxed throws (150 percent on a dee exx 8) you can really look around, in rudder axis close to 90 degrees, same with elevator axis. The roll axis is a little more limited but that's not going to be an issue. Servo centering was a little so and so, but they are not off by much. Weight 45.8gr for the main unit, add another 2.2gr for the extra camera mount and the two screws. Can't wait to try this with the Trinity head tracker! Recommend.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice resolution servos. With maxed throws (150 percent on a dee exx 8) you can really look around, in rudder axis close to 90 degrees, same with elevator axis. The roll axis is a little more limited but that's not going to be an issue. Servo centering was a little so and so, but they are not off by much. Weight 45.8gr for the main unit, add another 2.2gr for the extra camera mount and the two screws. Can't wait to try this with the Trinity head tracker! Recommend.

It works great with my trinity board. Panning is about 180 degrees, so that's fine.
There's only 1 problem though:
It comes without a camera, but HobbyKing doesn't stock the recommended
Fatshark 600tvl CMOS camera. So stars faded for that.
I had to buy the camera from RC711 or RMRC.

HobbyKing: PLEASE STOCK THE Fatshark 600tvl CMOS camera.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It works great with my trinity board. Panning is about 180 degrees, so that's fine.
There's only 1 problem though:
It comes without a camera, but HobbyKing doesn't stock the recommended
Fatshark 600tvl CMOS camera. So stars faded for that.
I had to buy the camera from RC711 or RMRC.

HobbyKing: PLEASE STOCK THE Fatshark 600tvl CMOS camera.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save