Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren

GFK-Verbund YAK54 0,46 3D Kit

GFK-Verbund YAK54 0,46 3D Kit

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
4377 g
SKU:
YAK-542C46
Product
Description

Diese 3D-YAK54 Composite-Ebene ist schön, wirklich schön!
Ein vollständig geformten Rumpf gibt die Ebene der großen Form und Form sowie als Licht, kann dies nicht mit Balsa allein erreicht werden. Die YAK54 ist wunderschön bemalt und umfasst Legierung Fahrwerk, Spornrad und Radverkleidungen.

Ursprünglich für 0,46 glühen Motoren kann der YAK54 nehmen ein ähnliches elektrisches System ohne Änderungen und mit der Überdachung als Batteriedeckel.

Ein geeigneter Motor für dieses tolle 3D-Ebene würde unsere G46-670 oder jede outrunner mit ähnlichen Abmessungen sein.

Spec.
Spannweite: 1330mm (52.3in)
Flügelfläche: 32SsqDm
Länge: 1160mm (45.6in)
Fluggewicht: 2700 ~ 2800g
Material: Sicherung: Fiberglas, Flügel: Ply / Balsa / Film
Fahrwerk: Alloy

Glow - Setup
Radio: Ihre eigene TX & RX
Servo: 5 x Standard-Servos
Motor: 0,40-0,46 2-Takt oder 0,52 4-Takt Verbrenner
Batterie: RX-Batterie

EP - Setup
Radio: Ihre eigene TX & RX
Servo: 4 x Standard-Servos
Motor: Turnigy G46-670
ESC: 60A
Batterie: 4s ~ 5s 4500 ~ 5000mah 20c Batterie

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    YAK-542C46
  • Brand:
    Nicht zutreffend
  • Gewicht ( g)
    4377.00
  • Länge
    885.00
  • Breite:
    235.00
  • Höhe:
    390.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Es necesario reforzar la cola, ya que he visto como se partia en dos modelos, es necesario colocar una tira de fibra de carbono y unos tirantes hasta el timon, tambien viene bien reforzar con un poco de fibra la base donde atornilla el tren de aterrizaje, es muy debil y al minimo aterrizaje un poco brusco, se parte el fuselaje.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
precisa de mais de 200gramas na frente uma merda o projeto voa mal igual ao decathlon
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not the best paint job in the world, Mine if you look close it has lots of paint cracks and it's never been flown. It's almost like the paint isn't flexable enough for the fiberglass, I'm wondering what it's going to look like in a couple months.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
today made its maiden flight.i put the 15cc gas engine from hobby king.standar metal gear servo hobby king.1 pack 4.8v nimh for reciver and a 7,4 v 2200 mah with bec 5v for the ignition. the plane needs another 350 grams weight forward. In air was very stable at slow speed.in 3d just perfect. The landing was very easy.
very good plane. I strongly recommend you
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got mine today everything were well packed, cant wait till i start buliding this babe, i have a 9cc gasser i will put in this coming weekend. I hope it flys well

Good job hobbyking. Keep up the good work
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Running ASP52 2stroke and 12X6 prop, underpowered will change to a 11X6 prop to try and get the revs up.



I had the rear stabilizer break on both sides of the fuselage, the balsa frame where the elevator hinges glue to tore apart on one side and the 2 main balsa stick frames on the other side of the plane snapped 5 minutes into the maiden flight.



I added approx 100g of lead to front of the plane to get CG 85mm back from LE, this balanced perfect. The plane has a good roll rate and flys great can easily pull the power off and glide in for landing.



Quality of the overall plane is very good (apart from the rear stabiliser being too weak).



Will post some build pics soon.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi Mr.Mach1 ..



its approximately about $115.91 by EMS Express..



AND, $36.13 by Air Parcel ..



actually you can know any shipping cost by try to buy it , but dont confirm it ..



i hope i help you ..



Best Regards



verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got mine today nicely made and good quality. Waiting for a good day to fly it, just nearly finished building it, using a O.S .46 with a Turngy 11/7 wooden prop
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi , I bought this one and found the bulid quality excelent , although I changed the wheels (the original were too small) I found the CG to be spot on but I had to load over 200 grams of lead in the cowling (nose)and Im using 5c 5,000 mah turnigy akku to get the balance right , The First flight was super although the hohen ruder was a bit severe
you need a long long airfield for this one and DONT try to land it slowly because of the weight it falls like a wet sack of cement .I used the G 46 motor and it performed suoer . Fazit. Super build, a bit on the heavy side and stricty not for beginners way too fast , in the air flys very direckt ...have fun ..
PB
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a very nic RC control model. Very quality.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.