Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

FlyCat EDF Foam Jet sehr schnell (Freisprecheinrichtung)

FlyCat EDF Foam Jet sehr schnell (Freisprecheinrichtung)

Shipped From:
  • USA
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

30,57 €
Status:
Auf Lager
SKU:
OR028-070
WANT FREE SHIPPING? Click here to find out more!

FlyCat EDF - Kit
Dieser kleine Satz dauert etwa 4 Stunden zu bauen und die Drossel jocky in allen von uns erfüllen!
Die Flycat kommt mit 56mm EDF und Sie werden eine 25A ESC & 4800kv inrunner benötigen.
Diese Ebene ist extrem schnell, (über 100 Stundenmeilen!), Aber immer noch stabil bei langsamen Flug.

Spec.
Spannweite: 640 mm
Länge: 800 mm
Gewicht: 290 g
BESC: 25A (nicht
im Lieferumfang enthalten)
Motor: 4800kv 20-30 Größe Inrunner (nicht enthalten)
Lipo: 1300mAh 11.1V 20C (nicht enthalten)
 


Erforderlich.
Motor & ESC
3 x 9g Servo
5 oder 10 Minuten Epoxy (Araldite)
1 x Servo Y Führung
1 x Servo Extention Blei
12AWG Silicon Draht (20cm Für Motor ESC)
1300mAh 11.1V 20C LiPo
- Akku
Ihre eigenen Empfänger und Sender

Unser Flug Bericht.
Kit passt gut zusammen, leichtes Anschleifen von Vorder- und Hinterkanten erforderlich zusätzlichen Schaum zu entfernen. Wir haben
, um die Flügel mit CF Schlauch stärken, was den Ball hielt sich als ein Problem zu sein, auch bei voller Geschwindigkeit hoch G dreht.
Wir entschieden uns
, die BESC ist der Batteriebereich zu montieren, die Batterie , falls erforderlich , nach vorne bewegt werden CofG einzustellen, aber dieses war nicht notwendig.
EDF wurde auf dem Stick Halterung montiert. Stock
- Halter wurde verkürzt, mit dem Extrastück verwendet , um die EDF aus dem Stab aufzubringen , um die EDF Verkleidung zu löschen. 2 Schrauben gehalten , um die Lüftereinheit auf den Stick, eine vor und eine nach der Lüfterflügel.
Erster Flug.
Wir hielten CofG 9.5cm von der Spitze der Winde Vorderkante. Die Flycat wurde
von Hand bei 3/4 Gas ins Leben gerufen, schnell steigernde. Zu unserer Überraschung war kein Abgleich erforderlich.
Die Flycat ist ein extrem schnelles Kit zu fliegen, und erforderte viel Aufzug in Kurven. Wir schlagen vor
, den Aufzug auf maximal wirft. Es braucht viel Aufzug in Kurven!
Insgesamt eine exzellente Ebene
, die glatt fliegt, auch an windigen Tagen.
Wir schlagen vor
, ein gutes Lipo - Pack, wie dieser kleine hotty durch einen 1500mAh in nur 5 Minuten zu kauen. Wir nutzten die ZIPPY-R 1800mAh 22C 3S1P Pack für rund 8 Minute Flüge. Im Vergleich zu der Packung ZIPPY-Q , die uns bei ca. 7 Minuten kurz gebracht.


 

  • Artikelbezeichnung OR028-070
  • Brand Other
  • Gewicht 1395.0000
  • Länge 670.00
  • Breite 95.00
  • Höhe 375.00
  • IC / 2: Elec -
  • Motorgrösse ( diam -or- cc) -
  • Spannweite (mm) 640.00
  • Length(mm) -
  • SaleWeight ( g) -
  • Kapazität ( mAh) -
  • flycat pusher
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

A bit disappointed, I found out it's eps after I bought it! If it's half as tough as the skyfun I'll be happy with it :-)) great options with it edf or prop, WHY do they make these edfs where you have to buy SPECIAL long narrow motors to fit in them? I have a box full of spare motors none of which will fit the edf

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A bit disappointed, I found out it's eps after I bought it! If it's half as tough as the skyfun I'll be happy with it :-)) great options with it edf or prop, WHY do they make these edfs where you have to buy SPECIAL long narrow motors to fit in them? I have a box full of spare motors none of which will fit the edf

Great little plane and great little price. I fitted a Dr mad 50mm 4800 EDF and squeezed a zippy 2200 3cell in the nose. Worth buying good control horns and a couple of earth magnets for the canopy. fly's very stable for a little plane, you can also fly as if you stole it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little plane and great little price. I fitted a Dr mad 50mm 4800 EDF and squeezed a zippy 2200 3cell in the nose. Worth buying good control horns and a couple of earth magnets for the canopy. fly's very stable for a little plane, you can also fly as if you stole it.

For the money this is a great little model, fly's really well. Invest in better quality control horns and earth magnets for the canopy, I also fitted a Dr mad 50mm fan. a careful bit of thumbing the inside of the battery area allows a zippy 2200 3cell to fit nicely.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For the money this is a great little model, fly's really well. Invest in better quality control horns and earth magnets for the canopy, I also fitted a Dr mad 50mm fan. a careful bit of thumbing the inside of the battery area allows a zippy 2200 3cell to fit nicely.

Used Turnigy 2610 4000KV, Turnigy Plush 40 Amp ESC, 1800Mah 20C and supplied EDF.
Speed a bit dissapointiung but it did fly and handle very nicely, sure needs a bit of power on when landing.
7mm throw on aileron, 12mm throw on elevator, 30pcntexpo. CoG at 110mm.
Will try 2610 5000KV next.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used Turnigy 2610 4000KV, Turnigy Plush 40 Amp ESC, 1800Mah 20C and supplied EDF.
Speed a bit dissapointiung but it did fly and handle very nicely, sure needs a bit of power on when landing.
7mm throw on aileron, 12mm throw on elevator, 30pcntexpo. CoG at 110mm.
Will try 2610 5000KV next.

I am building my second Fly cat . ( the first one being still in fly condition ) .. I want to put a tri-axis gyro box (orange RX-3S which is the smallest ) on the 3 rudders .( which needs to carve some place inside the fuse )
But , despite the engine I choosed for N 1 was great ,(TGY 2815 , ID: T28151A4800 . 73 g ) I look for an other engine that should be less heavy : an INRUNNER , Out shaft diam : < 24mm . Kv 4800 . Power # 400W
Who can help me to find an other engine than the TGY 2815 EDF ?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am building my second Fly cat . ( the first one being still in fly condition ) .. I want to put a tri-axis gyro box (orange RX-3S which is the smallest ) on the 3 rudders .( which needs to carve some place inside the fuse )
But , despite the engine I choosed for N 1 was great ,(TGY 2815 , ID: T28151A4800 . 73 g ) I look for an other engine that should be less heavy : an INRUNNER , Out shaft diam : < 24mm . Kv 4800 . Power # 400W
Who can help me to find an other engine than the TGY 2815 EDF ?

The fan adapter in this kit has a 3mm diameter hole in it. Nearly all the inrunner motors have a 2mm shaft diameter. Can someone who is using the EDF post a source for an appropriate motor to fit the fan housing. Thanks

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The fan adapter in this kit has a 3mm diameter hole in it. Nearly all the inrunner motors have a 2mm shaft diameter. Can someone who is using the EDF post a source for an appropriate motor to fit the fan housing. Thanks

I bought 4 for this palne,this plane a very good quality and handling, i am very satisfied all.Very stable and fast enough i use battery 3s 1300 and 1500mah with motors turnigy d2826 / 6 2200kv propeller 6x4.Very stable once

Thanks hobby,i give 6 thumb

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 4 for this palne,this plane a very good quality and handling, i am very satisfied all.Very stable and fast enough i use battery 3s 1300 and 1500mah with motors turnigy d2826 / 6 2200kv propeller 6x4.Very stable once

Thanks hobby,i give 6 thumb

This plane a very good quality and handling,i am very satisfied all.Very stable and fast enough i use battery 3s 1300 and 1500mah with motors turnigy d2826 / 6 2200kv.Very stable once
Thanks hobby

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This plane a very good quality and handling,i am very satisfied all.Very stable and fast enough i use battery 3s 1300 and 1500mah with motors turnigy d2826 / 6 2200kv.Very stable once
Thanks hobby

3S 1000mah nano tech, 3 HXT servo, 30A birdie and Turnigy 2632 Brushless Motor 3400kv 350W with 5x5 pusher prop. CG 9 cm from the crossing of the leading edge. Average max speed : 120 km/h Perfect flight, easy to launch and less than 50 $ all together. A lot of fun.
For more speed find another motor high kv, 500W, 3S.
I definitely would get it again.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

3S 1000mah nano tech, 3 HXT servo, 30A birdie and Turnigy 2632 Brushless Motor 3400kv 350W with 5x5 pusher prop. CG 9 cm from the crossing of the leading edge. Average max speed : 120 km/h Perfect flight, easy to launch and less than 50 $ all together. A lot of fun.
For more speed find another motor high kv, 500W, 3S.
I definitely would get it again.

Very cheap, simple good kit that flies well and very fast long your setup and COG is correct. Very fast build as its so simple, great jet especially people who have spare electronics laying around from dead planes. I added tiny bit lead weight to the front to correct C.o.G running 1300mah 3S 25C lipo, 4000kv outrunner and 30amp esc

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very cheap, simple good kit that flies well and very fast long your setup and COG is correct. Very fast build as its so simple, great jet especially people who have spare electronics laying around from dead planes. I added tiny bit lead weight to the front to correct C.o.G running 1300mah 3S 25C lipo, 4000kv outrunner and 30amp esc

Customer files
Allycat(Jetcat) assembly.Some itemsnot i Download [2539]
Tiger Flycat Download [4380]
HK manual FlyCat Download [1200]
flycat with pitot Download [1098]
No File Name Download [573]
Flycat photos - custom paint & landing g Download [942]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save