Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Flycolor 30 Ampere Multi-Rotor ESC 2 ~ 6S Opto

Flycolor 30 Ampere Multi-Rotor ESC 2 ~ 6S Opto

Discontinued Product

Please continue searching for a similar product.
SKU:
261000024-0
WANT FREE SHIPPING? Click here to find out more!

Diese Flycolor elektronische Geschwindigkeitsregler wurden speziell für Multirotor-Einsatz entwickelt. Sie verwenden eine Hochleistungs-MCU-Prozessor, der eine glatte lineare Reaktion gibt, die für Multi-Rotoren perfekt ist.

Die Flycolor elektronischen Drehzahlregler verfügen über Wärmeschutz, wird heruntergefahren, wenn das Signal verloren geht, haben einen niedrigen Spannungsschutz, anormalen Eingangsspannungsschutz und vieles mehr.

Eigenschaften:
• Entwickelt speziell für Multirotor-Einsatz
• Glatte, lineare Ansprechverhalten
• Verwendet leistungsstarke, Hochleistungs-MCU
• Unterstützt konstante Geschwindigkeit
• Mehrere Selbstschutzfunktionen: abnormal Spannungseingang, Batterieschutz, über Wärmeschutz, Drosselsignalverlust
• Sicherer Start, Motor wird erst ESC ausgeführt wird bewaffnet richtig
• Programmierbare über Gasknüppel (siehe Anweisungen unter "Dateien" tab)

Specs:
Konstantstrom: 30A
Max Burst Strom: 40A
Eingangsspannung: 7.4V ~ 22.2V (25.5V max)
BEC: Keine
Abmessungen: 50x23x9mm
Gewicht: 24 g
Servo Lead: JR Typ

Bitte beachten Sie : Dies ist ein Opto Drehzahlregler erfordert so eine separate Stromquelle für den Empfänger auch keine Batterie oder Motorstecker geliefert werden.

  • Artikelbezeichnung 261000024-0
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 31.0000
  • Länge 100.00
  • Packaging Width 10.00
  • Höhe 85.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Using these on a quad-copter using Quanum MT Series 3510 360KV motors on 6s. the setup i have could be a bit big for these but they are performing very well so far after 5 flights. I did install small vga heat sinks on them as i was a bit worry about the heat but that is now solved, placed them in the prop wash, running cool now.. the esc seem responsive, no need to flash them..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using these on a quad-copter using Quanum MT Series 3510 360KV motors on 6s. the setup i have could be a bit big for these but they are performing very well so far after 5 flights. I did install small vga heat sinks on them as i was a bit worry about the heat but that is now solved, placed them in the prop wash, running cool now.. the esc seem responsive, no need to flash them..

Purchased three of these for a HV 6S tricopter. They are tiny compared to other lower voltage ESC's. Soldering quality is excellent and they do the job. They get warm very quickly on 6S. I am not sure if i want to run 6S for to long on these sec's. Have been using 3S most of the time. They are very smooth to fly, and perform well for my application. Found that the heat sink will fall off the chip sets when you remove the head shrink, make sure to put it back on before sealing them up again after soldering motor and power wires to them. So far so good. Have not changed any settings just yet so can not comment on the correctness of the manual in the files tab. Just soldered them in and went flying. Good no fuss SC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Purchased three of these for a HV 6S tricopter. They are tiny compared to other lower voltage ESC's. Soldering quality is excellent and they do the job. They get warm very quickly on 6S. I am not sure if i want to run 6S for to long on these sec's. Have been using 3S most of the time. They are very smooth to fly, and perform well for my application. Found that the heat sink will fall off the chip sets when you remove the head shrink, make sure to put it back on before sealing them up again after soldering motor and power wires to them. So far so good. Have not changed any settings just yet so can not comment on the correctness of the manual in the files tab. Just soldered them in and went flying. Good no fuss SC.

Customer files
Flycolor Manual Download [505]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save