Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

FMA 4-Kanal-Co-Pilot Flugstabilisierungssystem incld. Programmierer

FMA 4-Kanal-Co-Pilot Flugstabilisierungssystem incld. Programmierer

Discontinued Product

Please continue searching for a similar product.
SKU:
COPILOT-II
WANT FREE SHIPPING? Click here to find out more!

Die neuen Co - Pilot II - Systeme stellen den Höhepunkt von Jahren der kumulierten technologischen Entwicklung und Fertigungswissen in kommerziellen Flug Stabilisierung. FMA patentierte Infrarot-Thermotechnik für Halb automomous Steuerung von R / C Modellflugzeug hat einen hervorragenden Ruf, mit zehn von Tausenden von verkauften Einheiten. ein zusätzliches Maß an Sicherheit zu modellieren Flugzeuge aller Typen, die bewährte Konzept hat sich Piloten aus der ganzen Welt ermöglicht Hinzufügen von mit Vertrauen zu fliegen, neue Kunstflugmanöver lernen, schützen ihre Investitionen im Falle von elektronischen oder mechanischen Versagens und Modellierer helfen aller Erfahrung und Geschick Ebenen fühlen nur mehr Vertrauen beim fliegen.

Die CPII ist weit mehr als ein einfacher Flügel Nivelliergerät. Ja, es wird Ihr Flugzeug auf Geradeausflug von jeder Haltung bringen einfach durch die Steuerknüppel Zentrierung, aber das neue System umfasst Funktionen und Verbesserungen, die weit über seine Vorgänger gehen. Angetrieben durch die erstaunliche neue IRNet (Infrarot-Netz) für kabellose Steuerung von On-Board-Avionik, hat Setup noch nie einfacher. Zeigen Sie einfach die die drahtlose IRNet Programmierer am Flugzeug, greifen Sie auf die Hauptmenüoption "Quick Setup" und Co-Pilot II fortschrittliche Computersystem führt Sie durch eine Reihe von einfachen Fragen im Zusammenhang, wie Sie gewählt haben, um die verschiedenen Komponenten wie Hauptsensor zu installieren , vertikale Sensor, als auch, wie Sie Remote-ON / OFF-Funktionen und neue Flug Modi konfigurieren gewählt haben. Ja, enthält die CPII alle neuen 3D-Modi, die Sie leicht und sicher ermöglichen können lernen oder neue Manöver wie Rückenflug, Messerkante oder vertikal schweben, die alle auf dem Umlegen eines Schalters üben. Wenn das Flugzeug aus der beabsichtigten Einstellung fällt, weiß Co-Pilot II es. Es wird der 3D-Modus deaktivieren lässt, und aktivieren Flug-Modus oder Co Pilot OFF, je nachdem, was Sie gewählt haben.

Die neue kleinere und leichtere digitale Sensoren und Computermodule erlauben auch für die Installation über eine breite Reihe von Plattformen. Das System unterstützt alle denkbaren Flugzeugkonfigurationen von Flugzeugen, zu Helis, zu VTOL; Ein Flugzeug, das nicht mehr als 4 Kanäle erfordern Nick- und Wankbewegungen zu bedienen. Dazu gehört die Unterstützung geteilt oder Differential Quer-, flapperons, alle Formen der CCPM Hubschrauber und vieles mehr!

umfasst die vertikale Sensor, der automatisch und kontinuierlich ermöglicht es, Wetter Kalibrierung im Flug, die zusätzliche Intelligenz durch Rollen des Flugzeugs das Flugzeug immer von Rückenflug in den Horizontalflug erholen zu haben, und der Zugang zu allen Flugzuständen 3D. Combo 2 auch beinhaltet nicht die PC-Schnittstelle, die bedeutet, dass Sie nicht in der Lage sein wird, die automatische Firmware-Updates über einen PC mit Windows-Betriebssystemen zugreifen können.

Größe:
CPII Computer Module (LxBxH): 1.754 "x 1.115" x 0.460 "
CPII Hauptsensor (LxBxH): 0.965 "x 0.965" x 0.360 "
CPII Vertikal Sensor (LxBxH): 0.965 "x 0.701" x 0.360 "
IRNet Router (LxBxH): 1,205 "x 1,005" x 0,532 "(ohne Tabs Montage)

Gewicht:

CPII Computer Module:
0,61 Unzen (19gm)
CPII Haupt Sensor:
0,23 Unzen (7GM)
CPII Vertikal-Sensor:
0,16 Unzen (5 gm)
IRNet Router:
0,26 Unzen (8 g)

Bewertungen:
Das System wird auf normalen R / C Spannungsbereich von etwa 3,5 V arbeiten bis 6 V.
Stromversorgung: Das System wird vom Funkgerät des Empfängers mit Strom versorgt.
Ausgänge: Bitte die CPII Systeme geraten sind so konzipiert , kleine Hubschrauber ohne zusätzliche Komponenten zu passen. Für Lager Helis und / oder Starrflügler, können Sie Standard Querruder Erweiterungen für die optimale Platzierung von vertikalen und / oder Hauptsensoren erfordern.
Anwendungen: Fügt sichere und effektive Flugstabilisierung einem R / C Modellflugzeuge zur Unterstützung bei der neuen Kunstflugmanöver lernen, Ihre Investition bei elektronischen oder mechanischen Versagen zu schützen, und die Unterstützung der Modellierer aller Erfahrung und Qualifikation nur sicherer fühlen , wenn fliegen .
Radio: Der Co - Pilot 2 ist kein RF - Gerät und deshalb wird es mit jeder Art oder Marke von R / C - Funksystem mit AM, FM / PPM, PCM auf einer beliebigen Frequenz sowie alle 2,4 GHz Spread - Spectrum - Systeme arbeiten.
Features: Co - Pilot II enthält eingebettete Stick Priorität mit einstellbarer Verstärkung , die zu einem übernatürlichen Fliegen trägt "fühlen"

  • Artikelbezeichnung COPILOT-II
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 337.0000
  • Länge 0.00
  • Breite 0.00
  • Höhe 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

First of all. WOW, what a price!



I paid over $250 including shipping to get my CPII from the US distributer. So for what is accepted as the best value for money stabilizer it is amazing



As for the unit, it is ok. I found it really frustrating to fly with. Even with stick priority at maximum, the CPII would still try and control my bird when I was moving sticks at hover, this makes a lot of simple turns trickier.



Awesome for learnign to h

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First of all. WOW, what a price!



I paid over $250 including shipping to get my CPII from the US distributer. So for what is accepted as the best value for money stabilizer it is amazing



As for the unit, it is ok. I found it really frustrating to fly with. Even with stick priority at maximum, the CPII would still try and control my bird when I was moving sticks at hover, this makes a lot of simple turns trickier.



Awesome for learnign to h

Lo mejor que hay en estabilizadores , yo tengo 3 en mis helicopteros y son parte escencial ya que los han salvado infinidad de veces de accidentes aun que ya tengo bastante experiencia no lo he querido quitar son como un seguro para mis aparatos cuando pierdo perspectiva o me deslumbra el sol de inmediato los prendo y en menos de 1 segundo el helicoptero esta en hover esperando a que yo decida mi siguiente movimiento, si hubiera 10 estrella sin duda las pondria!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Lo mejor que hay en estabilizadores , yo tengo 3 en mis helicopteros y son parte escencial ya que los han salvado infinidad de veces de accidentes aun que ya tengo bastante experiencia no lo he querido quitar son como un seguro para mis aparatos cuando pierdo perspectiva o me deslumbra el sol de inmediato los prendo y en menos de 1 segundo el helicoptero esta en hover esperando a que yo decida mi siguiente movimiento, si hubiera 10 estrella sin duda las pondria!!!

have not tried it yet, only play around with the programming unit. It came with the AAA batteries. The sensors are pretty small. They look bigger in the picture.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

have not tried it yet, only play around with the programming unit. It came with the AAA batteries. The sensors are pretty small. They look bigger in the picture.

oh what shoul i say about this little thing......so so good for beginners ....i must admit that u dont get a better way to save your model from crashes as well as learning new manuver or safely without crashing and damaging ...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

oh what shoul i say about this little thing......so so good for beginners ....i must admit that u dont get a better way to save your model from crashes as well as learning new manuver or safely without crashing and damaging ...

i have been flying plane and heli ,but i have not improve much on 3d heli flying before fixing this on my heli ,jus flip the button and it will stable the heli into a hover if u loose control when learning new manovers

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i have been flying plane and heli ,but i have not improve much on 3d heli flying before fixing this on my heli ,jus flip the button and it will stable the heli into a hover if u loose control when learning new manovers

Fitted to a JS90 nitro heli, works very well. When the CPII is active the fell of the heli is a little off putting due to fighting the CPII. With the unit off and 7deg angle set it works with the pilot very well and you don't really notice it in the back ground but when you let the sticks go it sits in a nice hover with slow drift.
VERY VERY IMPRESSED WITH THIS!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fitted to a JS90 nitro heli, works very well. When the CPII is active the fell of the heli is a little off putting due to fighting the CPII. With the unit off and 7deg angle set it works with the pilot very well and you don't really notice it in the back ground but when you let the sticks go it sits in a nice hover with slow drift.
VERY VERY IMPRESSED WITH THIS!

The FMA4 has to be the best training system,it gives the novice the confidance to fly
Works as advertised and easy to set up
Had a first time novice flying by himself imediately
And it is great for landing assist as it holds the aircraft on course while you reduce throtle and presto a perfect landing
Best thing ever made for rc flying

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The FMA4 has to be the best training system,it gives the novice the confidance to fly
Works as advertised and easy to set up
Had a first time novice flying by himself imediately
And it is great for landing assist as it holds the aircraft on course while you reduce throtle and presto a perfect landing
Best thing ever made for rc flying

Size:

CPII Computer Module (LxWxH): 1.754" x 1.115" x 0.460"

CPII Main Sensor (LxWxH): 0.965" x 0.965" x 0.360"

CPII Vertical Sensor (LxWxH): 0.965" x 0.701" x 0.360"

IRNet Router (LxWxH): 1.205" x 1.005" x 0.532" (not including mount tabs)



Weight:

CPII Computer Module:

0.61 oz (19gm)

CPII Main Sensor:

0.23 oz (7gm)

CPII Vertical Sensor:

0.16 oz (5gm)

IRNet Router:

0.26 oz (8gm)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Size:

CPII Computer Module (LxWxH): 1.754" x 1.115" x 0.460"

CPII Main Sensor (LxWxH): 0.965" x 0.965" x 0.360"

CPII Vertical Sensor (LxWxH): 0.965" x 0.701" x 0.360"

IRNet Router (LxWxH): 1.205" x 1.005" x 0.532" (not including mount tabs)



Weight:

CPII Computer Module:

0.61 oz (19gm)

CPII Main Sensor:

0.23 oz (7gm)

CPII Vertical Sensor:

0.16 oz (5gm)

IRNet Router:

0.26 oz (8gm)

The FMA4 has to be the best training system,it gives the novice the confidance to fly

Works as advertised and easy to set up

Had a first time novice flying by himself imediately

And it is great for landing assist as it holds the aircraft on course while you reduce throtle and presto a perfect landing

Best thing ever made for rc flying

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The FMA4 has to be the best training system,it gives the novice the confidance to fly

Works as advertised and easy to set up

Had a first time novice flying by himself imediately

And it is great for landing assist as it holds the aircraft on course while you reduce throtle and presto a perfect landing

Best thing ever made for rc flying

Got this for a new build HK 600.Fitted on tail boom on the horizontal stabilizer platform. Used HK ST-FOAM-DB, Peel-n-stick foam tape. Got it all mounted and set up. Read the manual which all made sense save for the trim and angles setup which required a couple of reads to sink in. After about 9 cautious hover and trim episodes had it pretty much set up then the main sensor popped off the mounting foam about a foot off the ground and that nearly caused a disaster but I was able to get down in one piece. Have since fixed the sensor with cable ties as well so its not going anywhere the boom does not go first.

Took it out today and it flew and stabilized as advertised. Now it is a matter of adjustments (CPII and flying style) until I am happy with how it works. So far so good.

Tips
Trim out fully before you fit
Firmly attach the sensors, cable ties for total security and test on the ground with hand heat for correct reaction.
Ajust gyro gain if setting through CPII until you are happy.
Ajust CPII gains to eliminate any nodding etc similar setup for gyros to get a solid non wagging lock
Ajust trims to get a stable hover as required (each flight ?)
Start flying and start adjusting stick priorities until you are happy.

All in all looks like a good, solid heli saving product.

If you are going to fit yourself you will at least be able to hover tail in and trim out before you can

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got this for a new build HK 600.Fitted on tail boom on the horizontal stabilizer platform. Used HK ST-FOAM-DB, Peel-n-stick foam tape. Got it all mounted and set up. Read the manual which all made sense save for the trim and angles setup which required a couple of reads to sink in. After about 9 cautious hover and trim episodes had it pretty much set up then the main sensor popped off the mounting foam about a foot off the ground and that nearly caused a disaster but I was able to get down in one piece. Have since fixed the sensor with cable ties as well so its not going anywhere the boom does not go first.

Took it out today and it flew and stabilized as advertised. Now it is a matter of adjustments (CPII and flying style) until I am happy with how it works. So far so good.

Tips
Trim out fully before you fit
Firmly attach the sensors, cable ties for total security and test on the ground with hand heat for correct reaction.
Ajust gyro gain if setting through CPII until you are happy.
Ajust CPII gains to eliminate any nodding etc similar setup for gyros to get a solid non wagging lock
Ajust trims to get a stable hover as required (each flight ?)
Start flying and start adjusting stick priorities until you are happy.

All in all looks like a good, solid heli saving product.

If you are going to fit yourself you will at least be able to hover tail in and trim out before you can

  1. 1
  2. 2
  3. 3
Customer files
FMA CPII Quick Start Download [399]
FMA CPII reference manual Download [866]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!