1:24 scale Rock Crawlers have become very popular over the last few years, FMS has become part of this fast-growing side of the RC hobby with this meticulously designed small, but mighty FCX24 Power Wagon. FMS is one of the most experienced RC manufacturers today, and this replica's attention to detail is second to none. The full-size Power Wagon originally started production in 1945, the FMS version depicts the type that became available in around 1949. This model perfectly captures the essence of the full-scale Power Wagon design, which appeared as a mud off-road truck. Its realism is beyond expectations with the accurate details including, non-slip footplates, snorkel, windscreen wipers, and spare (useable) wheel and tire.

The underside of the Power Wagon features a high-performance, high-strength nylon crawler chassis, providing a durable and rigid platform. The included multi-link suspension with coil springs and hydraulic shock absorbers allows for maximum axle articulation over rough terrain to maintain traction. The power from the two-speed high-torque transmission is transmitted to the front and rear axles through metal universal drive shafts, and the axles are equipped with a simple gearbox built into each hub (commonly known as a "Portal Axle") which increases the ground clearance and reduces the load on the differential. The Power Wagon also includes a 2-speed gearbox that is operated by the transmitter via an on-board servo. The low gear of 99:1 gives the Power Wagon a strong output torque for extreme climbing, and the 24.75:1 ratio gives the Power Wagon an impressive top speed of up to 8km/h.

The FCX24 Power Wagon has an easy-to-remove rigid, injection-molded polystyrene bodyshell, this means it has highly accurate scale detail, plus it is tough and very durable. The Power Wagon also boasts a scale fully functioning light system for even more added realism.

The 1:24 scale FMS FCX24 Power Wagon V2 4WD arrives ready to run, it is fully assembled and is complete with a full set of powerful, factory-installed water-resistant electronics. These include a high-torque brushed 130 motor, 2-in-1 receiver/ESC, independent chassis-mounted metal-geared steering servo, and a 7.4V (2S) 380mAh LiPo battery for up to 30 minutes of run time. To get started, you only need to charge the LiPo with the supplied USB charger, install 4 x “AAA” batteries into the included G3 V1 3ch 2.4GHz transmitter, and you are ready to unleash your adventurous spirit.

Features:
• Ready to run with motor, 2-in-1 Rx/ESC, steering servo, G3 3ch Tx, LiPo battery, and USB charger
• "Portal Axles" increase ground clearance and reduce the load on the differential
• High-strength nylon crawler chassis and two-speed transmission
• Easily removed highly detailed, painted polystyrene bodyshell
• Scale, functioning lighting
• Multi-link suspension and oil-filled shocks allow for maximum axle articulation and all-wheel traction
• Drive train includes ball races for durability and reduced friction loss

Specs:
Type: FMS FCX24 Power Wagon V2 4WD Rock Crawler
Scale: 1:24
Build Stage: Ready to run
Body: Injection-molded painted scale bodyshell
Drivetrain: 4WD
Drive Type: Forward/Brake/Reverse
Motor: 130 brushed
Rx/ESC: Combined 2-in-1 unit
Steering Servo: Metal-geared digital
Shock Absorbers: Tuned coil oil-filled shocks
Suspension: Multi-link
Transmission: 2-speed
Tires: M/T high-grip soft all-terrain
Length: 210mm (8.25")
Width: 124mm (4.88")
Height: 132mm (5.2")
Ground Clearance: 26mm (1.37")
Weight: 390g (13.75oz) excluding battery
Battery: 7.4V (2S) 380mAh LiPo
Charger: USB
Body Color: Yellow

Includes:
1 x FMS (RTR) 1:24 FCX24 Power Wagon V2 4WD Rock Crawler (Yellow)
1 x G3 V1 3ch 2.4GHz Transmitter
1 x Receiver/ESC 2-in-1 unit
1 x 180 brushed motor
1 x 7.4V (2S) 380mAh LiPo battery
1 x USB charger
1 x Hex socket wrench
1 x Instruction manual

Requires:
4 x "AAA" batteries for the Tx
Plenty of open space and rough terrain

Please note: A copy of the instruction manual is available under the "Manual/Files" tab.