Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Fokker E.III Eindecker WW1 Fighter Lasergeschnittenes Balsa-Kit 1520mm (60")

Generating Links

Fokker E.III Eindecker WW1 Fighter Lasergeschnittenes Balsa-Kit 1520mm (60")

Preis:

Now save speichern 0,00 € 0,00 €

119,88 €
Status:
Ausverkauft!
SKU:
9099000080-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

Die Fokker-Geißel war in den frühen Tagen des Ersten Weltkriegs äußerst gefürchtet, und die Fokker E.III war die Legende hinter dem Terror.


Mit seinem einzigen Maschinengewehr, das durch den Propellerbogen feuerte, war es das erste Flugzeug, das über diese geniale mechanisch synchronisierte Kriegswaffe verfügte. Der Eindekker betete auf dem unbewaffneten und langsameren Spotter-Flugzeug der britischen Streitkräfte und erzielte mit seiner agilen Manövrierfähigkeit und neu gestalteten Waffe viele Kills an der Westfront. Im Laufe der Kriegsjahre und der Entwicklung und Weiterentwicklung der Flugzeugtechnologie wurde die Fokker E.III Eindekker obsolet und die Fokker-Geißel war nicht mehr.


Unser Modell fängt den wahren Geist des Fokker Eindekker aus dem frühen Ersten Weltkrieg ein. Es hat eine offene Rahmenstruktur aus hochwertigem Balsa und Hartholz, eine Glasfaserhaube und Kunststoffabdeckungen aus Kunststoff, einen Dummy-Rotationsmotor und natürlich das Maschinengewehr. Um die Konstruktion zu vereinfachen, sind alle Teile wunderschön lasergeschnitten und äußerst genau, sodass Sie das perfekte Modell erstellen können. Um den Inhalt dieses hervorragenden Kits zu vervollständigen, sind ein Paar Vintage-Flugzeugräder, vorgebogene und gebohrte Aluminium-Flügelstreben und Fahrwerksbeine, Carbonrohr-Flügelholme und Tischler sowie ein umfassendes Hardware-Paket mit Takeldraht, Muttern und Schrauben enthalten. Servohörner, Stangen und Verbinder usw.


Der Fokker E.III wurde für die Verwendung eines bürstenlosen 35- oder 42-mm-Outrunner-Motors mit einer Leistung von 500 bis 600 Watt auf einem 5 bis 6-Zellen-LiPo-Akku mit einem elektronischen Geschwindigkeitsregler von 40 bis 60 A entwickelt. Das Schwingen eines 12 ~ 14-Zoll-Propellers und Servos in Standardgröße sind für alle Bedienoberflächen ausreichend.


Insgesamt ist dies ein fantastischer Bausatz und aufgrund seiner einfachen Konstruktion perfekt für erfahrene Bauherren oder solche mit begrenzter Bauerfahrung. Sobald dieser böse kleine Fokker in einer authentischen strukturierten Abdeckung wie dem antiken Solartex und dem Hinzufügen von Waagenzubehör wie einem Piloten und der Verwitterung fertig ist, wird er wirklich gut aussehen und viele Köpfe drehen, die die Briten und ihre Verbündeten auf Ihrem örtlichen Flugfeld oder RC Flugverein.

Eigenschaften:
• Lasergeschnittene Teile für Genauigkeit und einfache Konstruktion
• Carbonholme und Flügelrohre
• Radiale Motorhaube aus Glasfaser
• Kunststoffgeformte Motorabdeckungen
• Authentische Rigging-Drähte
• Umfassendes Hardwarepaket


Technische Daten:
Spannweite: 1520 mm
Rumpflänge: 1170mm
Fluggewicht: 2700 ~ 3000g
Motor: 3530 ~ 4250 oder Gas / Nitro-Äquivalent
ESC: 40 ~ 60A geeignet für bis zu 6S
Propeller: 12 ~ 15 Zoll
Batterie: 2600 ~ 3000mah 5 ~ 6S


Erforderlich:
1 x 3530 ~ 4250 Bürstenloser Outrunner-Motor oder Gas / Nitro-Äquivalent
1 x 40 ~ 60A 6S elektronischer Drehzahlregler
4 x 17 ~ 40 g Servos (5 erforderlich, wenn ein Gas- / Nitro-Motor verwendet wird)
1 x 12 oder 15 Zoll Propeller
1 x 2600 ~ 3000mAh 5 ~ 6S LiPo-Akku
Strukturiertes Abdeckmaterial
Verschiedene Klebstoffe
Verschiedene Handwerkzeuge


Eine Kopie des Handbuchs finden Sie unter der Registerkarte "Dateien".

  • IC / 2: Elec Electric
  • Spannweite (mm) 1520.00
  • Construction Documentation
  • HobbyKing Fokker E.III Eindecker WW1 Fighter Laser Cut Balsa Kit 1520mm (60")
  • Fokker E III Eindecker WW1 Fighter Laser Cut Balsa Kit 1520mm HobbyKing
  • Fokker E III Eindecker WW1 Fighter Laser Cut Balsa Kit 1520mm HobbyKing
  • Fokker E.III
  • Fokker E.III Eindecker WW1 Fighter Laser Cut Balsa Kit 1520mm (60")
  • Construction Docu - Part 1
  • Construction Docu - Part 2
  • Construction Docu - Part 3
  • HobbyKing Fokker E.III Eindecker WW1 Fighter Laser Cut Balsa Kit 1520mm (60") - Flying.
  • HobbyKing Fokker E.III Eindecker WW1 Fighter Laser Cut Balsa Kit 1520mm (60") - Flying.
  • My Fokker E.III - See photo and description in "Rate & Review" e "Upload Files" tabs
  • My Fokker E.III
Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

FredFrog | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Good quality and detail but poor instructions.

Nov 08, 2022

Good quality and detail but poor instructions. Revert to the internet for help!

Dave | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Great kit, horrible instructions!

Sep 19, 2022

The lazer cutting is precise.
The hardware package is very complete.
Really an amazing value for $125 usd.
Instructions, as has been stated, are HORRIBLE! Do NOT attempt to build this airplane without referencing "Captain Rob's RC Model Geeks" on Youtube; it's an invaluable resource.
Haven't flown it yet, but soon!

Tomáš | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Výchylky

Apr 17, 2022

Please
what are your deviations on the elevator and ailerons?
Thank you.

woody | Verifizierter Käufer

  • Overall
  • Quality
  • Value

ok

Aug 01, 2021

there are no weels insite

Werner | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Buy recommendation

Apr 17, 2021

Very happy with the performance and the price is good too!

Robin | Verifizierter Käufer

  • Overall
  • Quality
  • Value

It’s a great scale model spoiled by the lack of decent instructions, not for a beginner.

Apr 01, 2021

The first thing I did was check for missing parts, no main wheels, but within 2 minutes of putting a claim in I received an email saying they would be dispatched and 2 weeks later they arrived.
The laser cut ply and balsa parts are excellent, the instructions for assembly are awful. The instructions are 4 sides of A3 pictures with some part numbers that don’t always correspond with those on the artwork. Some parts to this day I have no idea what they were for or where they go, namely parts Q1 and Q3
I found out too late that the servo tray now unfortunately sits too low as when you fit the servos the cables hit the wing anchorage points.
The 6mm carbon tube for the tail plane is too thin to allow the 4mm carbon rod to go through, I bought some alloy tube that worked ok. The holes drilled into the 2 x 65mm carbon sheet lugs are too big for the rod that goes through it to locate the tailplane, I drilled the correct size at the other ends. There is no instruction or idea how far the plywood engine block enters the fuselage, or any idea how to mount the cowl and dummy engine.
I managed to get some Antique Solartex that gives the model a dated look, but I am waiting for better weather to fly it.
It’s a great scale model spoiled by the lack of decent instructions, not a beginners model

Graham | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Nearly there

Mar 23, 2021

Yes nearly there ,The main issues were battery placement and size ,dummy motor locating .
So I fitted a 4250 800Kv motor . The dummy motor housing needs opening up to give better clearance first mount the plywood motor template on 3 off 3mm studs around the motor now remove template complete with studs cut 3 holes in the rear motor blow moulding and build the dummy motor remount the assembly and adjust the stud height for clearance and position .
Now offer complete assembly to the fusealage adjust the mounting box height for good cowl clearance . Do not fix but place blocks of hardwood either side and at the top these you can screw through to locate the motor and mount assembly and it is adjustable and removable even when completely assembled .
Now the battery tray can be mounted into the rear of the motor housing approximately 20mm from the bulkhead the battery is a 4s 3300mah about 400grams
now fit it together and c of g should be very close and the whole assembly is adjustable and removable.
Only the rigging and decals to do,fingers crossed

Graham | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Second Impressions

Feb 23, 2021

OK so now I am well into it .Problems Elevator carbon tubes will not slide one into the other ,so aluminium tubes with aluminium 4mm rod nice job Similar subject wing joiner rod is too short to support properly longer rod now OK .
Construction wise (thanks to RC Model Geeks) all went well BUT where do you site the battery loads of space up front but not easy to access HELP.
The elevator dual pull pull system looks impressive but the elevator control is twitchy (RC model geeks again) so I have gone for single pull pull short solid links to a servo about 200mm from the tail dead solid and with short arms on the servo movement is modest . SO WHERE DO I FIT THE BATTERY FOR BEST C/G

Graham | Verifizierter Käufer

  • Overall
  • Quality
  • Value

First Impressions

Jan 13, 2021

First impressions,quick delivery free or should I say no additional cost , it was well packed 3 boxes in all and you are there . First surprise there is a full size plan of the wings and tailplane ,but images of the wood pack don't seem complete,fingers crossed that all is there undercarriage is made up so no bending required. Now the tail wheel was there but NO main wheels .Fast response from HK so hope they turn up ,watch this space . So what else is missing I wonder ? I have built the Spacewalker and that was ok had extra parts that go nowhere. Will report eventually on the build which will be electric .

Paul | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Recommendable

Apr 05, 2020

Good quality at an affordable price. Very satisfied, definitely recommendable.
It is a nice kit for which there is a lot of information on the Internet, if you can not cope with the poor building instructions. I think no kit is suitable for unskilled hobbyists. But with some talent and help from the net, it's not a big deal.
I wanted to build it as an e-model first, but then decided to install a 9 cc NGH gasoline engine that fits perfectly and I hear where it is flying, haha.

  1. 1
  2. 2
  3. 3
Kundendateien
Fokker E111 Manual Download [6]
WhatsApp Image 2018-08-18 at 22.58.27(2).jpeg Download [99]
WhatsApp Image 2018-08-18 at 22.58.24(1).jpeg Download [113]
WhatsApp Image 2018-08-18 at 22.58.24.jpeg Download [97]
WhatsApp Image 2018-08-18 at 22.58.25(1).jpeg Download [76]
WhatsApp Image 2018-08-18 at 22.58.25(2).jpeg Download [108]
WhatsApp Image 2018-08-18 at 22.58.25(3).jpeg Download [106]
WhatsApp Image 2018-08-18 at 22.58.25.jpeg Download [100]
WhatsApp Image 2018-08-18 at 22.58.26(1).jpeg Download [112]
WhatsApp Image 2018-08-18 at 22.58.26(2).jpeg Download [116]
  1. 1
  2. 2
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!

Related Tags

Zubehör